インストールイメージへのリンクが直ちに必要な方は、 debian-installer
ホームページを確認してください。 debian-cd チームが debian-installer
を使用してビルドしたインストールイメージは、Debian CD/DVD ページから入手できます。どこでインストールイメージを手に入れられるかについてのより詳細に関しては、「Debian GNU/Linux 公式インストールイメージ」をご覧ください。
一部のインストール方法では、光学メディア用以外のイメージを必要とします。 debian-installer
ホームページには、他のイメージへのリンクがあります。 「どこでインストールファイルを探すか」は、Debian ミラーサイトでイメージを探す方法について説明しています。
以下の小節では、インストール可能なそれぞれの手段のためにどのイメージを取得するべきかを詳しく説明します。
The netinst CD image is a popular image which can be used to install trixie with the debian-installer
. This installation method is intended to boot from the image and install additional packages over a network; hence the name 「netinst」. The image has the software components needed to run the installer and the base packages to provide a minimal trixie system. If you'd rather, you can get a DVD image which will not need the network to install. You only need the first image of such set.
好みのタイプをダウンロードして、光学ディスクに焼いてください。ディスクから起動するには、「BIOS/UEFI 設定メニューの起動」 で説明しているように、BIOS/UEFI 設定を変更する必要があるかもしれません。
取り外し可能な USB 記憶装置からもインストールできます。例えば、USB メモリは、どんな場所ででも手軽に Debian をインストールできる媒体です。
USB メモリを準備する最も簡単な方法は、それに合う Debian の CD/DVD イメージのどれかをダウンロードして、直接 USB メモリにそのイメージを書き込むことです。もちろん、これによって既に USB メモリ上にあるものはすべて壊れます。これが動作するのは、Debian の CD/DVD イメージが光学ドライブからでも USB メモリからでもどちらでも起動できる 「iso ハイブリッド」 イメージだからです。
There are other, more flexible ways to set up a memory stick to use the debian-installer, and it's possible to get it to work with smaller memory sticks. For details, see our wiki.
USB 記憶装置からの起動は UEFI システムでは極めて一般的ですが、古い BIOS の世界ではやや異なります。いくつかの BIOS は、USB 記憶装置を直接起動できますが、起動できないものもあります。BIOS/UEFI で 「USB legacy support」 もしくは 「Legacy support」 を有効にする必要があるかもしれません。USB デバイスを認識してそこから起動するためには、起動デバイス選択メニューで 「removable drive」 または 「USB-HDD」 が表示されている必要があります。役に立つヒントや詳細に関しては、「USB メモリからの起動」をご覧ください。
debian-installer
をネットから完全に起動することもできます。netboot のための様々な方法は、アーキテクチャや netboot の設定に依存します。netboot/
以下のファイルは、debian-installer
を netboot するために使用できます。
設定するのに最も容易なのは、おそらく PXE netbooting です。netboot/pxeboot.tar.gz
ファイルを /srv/tftp
の中か、tftp サーバのどこか適切なところに解凍してください。DHCP サーバを設定して、クライアントへファイル名 pxelinux.0
を渡してください。運がよければすべてがうまく動作するでしょう。詳細な説明に関しては、「TFTP ネットブート用ファイルの準備」をご覧ください。
It's possible to boot the installer using no removable media, but just an existing hard disk, which can have a different OS on it. Download hd-media/initrd.gz
, hd-media/vmlinuz
, and a Debian DVD image to the top-level directory of the hard disk. Make sure that the image has a filename ending in .iso
. Now it's just a matter of booting linux with the initrd. 「GRUB を用いた Linux からの起動」 explains one way to do it.