Debian-installer 1st-stage master file HR - en to hr translation catalogue (539 entries)

note: Type: multiselect Description :sl2:
en: Installer components to load:
hr: Instalacijske komponente za učitavanje:

note: Type: multiselect Description :sl2:
en: All components of the installer needed to complete the install will be loaded automatically and are not listed here. Some other (optional) installer components are shown below. They are probably not necessary, but may be interesting to some users.
hr: Sve komponente instalacijskog programa potrebne za završetak instalacije biti će automatski učitane i one nisu na ovom popisu. Ostale (neobavezne) komponente instalacijskog programa su prikazane ispod. One vjerojatno nisu potrebne, ali mogu biti zanimljive nekim korisnicima.

note: Type: multiselect Description :sl2:
en: Note that if you select a component that requires others, those components will also be loaded.
hr: Uzmite u obzir da ako odaberete komponentu koja zahtijeva druge komponente, te druge komponente će biti isto učitane.

note: Type: multiselect Description :sl2:
en: To save memory, only components that are certainly needed for an install are selected by default. The other installer components are not all necessary for a basic install, but you may need some of them, especially certain kernel modules, so look through the list carefully and select the components you need.
hr: Zbog uštede memorije, samo oni moduli instalacije koji su sigurno potrebni za instalaciju su odabrani za učitavanje. Ostale popisane komponente nisu neophodne za osnovnu instalaciju, ali ćete možda ipak trebati neke od njih, osobito pojedine module za kernel. Zato pozorno pregledajte popis i odaberite komponente koje su vam potrebne.

note: Type: error Description :sl2:
en: Failed to load installer component
hr: Neuspjelo učitavanje instalacijskih komponenti

note: Type: error Description :sl2:
en: Loading ${PACKAGE} failed for unknown reasons. Aborting.
hr: Učitavanje ${PACKAGE} neuspjelo zbog nepoznatih razloga. Prekidam.

note: Type: boolean Description :sl2:
en: Continue the install without loading kernel modules?
hr: Nastavi instalaciju bez učitavanja kernelovih modula?

note: Type: boolean Description :sl2:
en: No kernel modules were found. This probably is due to a mismatch between the kernel used by this version of the installer and the kernel version available in the archive.
hr: Nema pronađenih kernelovih modula. Razlog tomu je vjerojatno nepodudarnost inačica kernela kojeg koristi instalacija i kernela dostupnog u arhivi.

note: Type: boolean Description :sl2:
en: You should make sure that your installation image is up-to-date, or - if that's the case - try a different mirror, preferably deb.debian.org.
hr: Svakako provjeri je li instalacijska slika aktualna. Ako je, isprobaj neko drugo zrcalo, po mogućnosti deb.debian.org.

note: Type: boolean Description :sl2:
en: The installation will probably fail to work if you continue without kernel modules.
hr: Instalacija vjerojatno neće uspjeti ako nastavite bez kernelovih modula.

note: Type: text Description :sl2:
en: Scanning local repositories...
hr: Pretraživanje lokalnih repozitorija...

note: Type: text Description :sl2:
en: Scanning the security updates repository...
hr: Pretraživanje repozitorija sigurnosnih nadopuna...

note: Type: text Description :sl2:
en: Scanning the release updates repository...
hr: Pretraživanje repozitorija nadopuna izdanja...

note: Type: text Description :sl2:
en: Scanning the backports repository...
hr: Pretraživanje repozitorija podržanih nadopuna...

note: #-#-#-#-#  templates.pot (apt-setup)  #-#-#-#-# Type: select Choices :sl2: These are choices of actions so this is, at least in English, an infinitive form #-#-#-#-#  templates.pot (net-retriever)  #-#-#-#-#
en: Retry
hr: Pokušaj ponovno

note: Type: select Choices :sl2: These are choices of actions so this is, at least in English, an infinitive form
en: Ignore
hr: Zanemari

note: Type: select Description You should end this with a colon. A non-translatable variable follows with the mirror URL :sl2:
en: The installer failed to download the public key used to sign the local repository at ${MIRROR}:
hr: Instalacijski program nije uspio preuzeti javni ključ s kojim se potpisuje lokalni repozitorij na ${MIRROR}:

note: Type: error Description :sl2:
en: Cannot access repository
hr: Nemoguć pristup repozitoriju

note: Type: error Description :sl2:
en: The repository on ${HOST} couldn't be accessed, so its updates will not be made available to you at this time. You should investigate this later.
hr: Repozitoriju na ${HOST} nije bilo moguće pristupiti, stoga te nadopune trenutačno nisu dostupne. Ovo trebate proučiti kasnije.

note: Type: error Description :sl2:
en: Commented out entries for ${HOST} have been added to the /etc/apt/sources.list file.
hr: Upisi komentara za ${HOST} su dodani u /etc/apt/sources.list datoteku.

note: Type: error Description :sl2:
en: apt configuration problem
hr: apt problem podešavanja

note: #-#-#-#-#  templates.pot (apt-setup)  #-#-#-#-# Type: select Choices :sl2: These are choices of actions so this is, at least in English, an infinitive form #-#-#-#-#  templates.pot (net-retriever)  #-#-#-#-#
en: Change mirror
hr: Promijeni zrcalni poslužitelj

note: Type: select Description :sl2:
en: Downloading a file failed:
hr: Preuzimanje datoteke nije uspjelo:

note: Type: select Description :sl2:
en: The installer failed to access the mirror. This may be a problem with your network, or with the mirror. You can choose to retry the download, select a different mirror, or ignore the problem and continue without all the packages from this mirror.
hr: Instalacijski program nije uspio pristupiti zrcalnom poslužitelju. Možda je problem u vašoj mreži ili s tim zrcalnim poslužiteljem. Možete pokušati ponovno preuzimanje, odabrati neki drugi zrcalni poslužitelj, ili zanemariti problem te nastaviti bez svih paketa s tog zrcalnog poslužitelja.

note: Type: boolean Description :sl2:
en: Continue without a network mirror?
hr: Nastavi bez mrežnog zrcalnog poslužitelja?

note: Type: boolean Description :sl2:
en: No network mirror was selected.
hr: Mrežni zrcalni poslužitelj nije odabran.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use restricted software?
hr: Koristi ograničeni softver?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some non-free software is available in packaged form. Though this software is not a part of the main distribution, standard package management tools can be used to install it. This software has varying licenses which may prevent you from using, modifying, or sharing it.
hr: Pojedini vlasnički softver je dostupan u obliku paketa. Iako taj softver nije dio glavne distribucije, može se instalirati uobičajenim alatima za upravljanje paketima. Taj softver ima različite licence koje vas mogu spriječiti u korištenju, prilagođavanju ili dijeljenju tog softvera.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use software from the "universe" component?
hr: Koristi softver iz "universe" repozitorija?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some additional software is available in packaged form. This software is free and, though it is not a part of the main distribution, standard package management tools can be used to install it.
hr: Pojedini dodatni softver je dostupan u obliku paketa. Taj softver je slobodan iako nije dio glavne distribucije, može se instalirati uobičajenim alatima za upravljanje paketima.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use software from the "multiverse" component?
hr: Koristi softver iz "multiverse" repozitorija?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some non-free software is available in packaged form. Though this software is not a part of the main distribution, standard package management tools can be used to install it. This software has varying licenses and (in some cases) patent restrictions which may prevent you from using, modifying, or sharing it.
hr: Pojedini vlasnički softver je dostupan u obliku paketa. Iako taj softver nije dio glavne distribucije, može se instalirati uobičajenim alatima za upravljanje paketima. Taj softver ima različite licence i (u nekim slučajevima) ograničenja patentima koji vas mogu spriječiti u korištenju, prilagođavanju ili dijeljenju tog softvera.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use software from the "partner" repository?
hr: Koristi softver iz "partner" repozitorija?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some additional software is available from Canonical's "partner" repository. This software is not part of Ubuntu, but is offered by Canonical and the respective vendors as a service to Ubuntu users.
hr: Pojedini dodatni softver je dostupan iz Canonicalovog "partner" repozitorija. Ovaj softver nije dio Ubuntua, ali ga Canonical i pojedini izdavači nude kao uslugu korisnicima Ubuntua.

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Use backported software?
hr: Koristi 'backported' softver?

note: Type: boolean Description This template is used by the Ubuntu version of d-i. :sl2:
en: Some software has been backported from the development tree to work with this release. Although this software has not gone through such complete testing as that contained in the release, it includes newer versions of some applications which may provide useful features.
hr: Pojedini softver je prebačen iz razvojnog stabla kako bi radio s ovim izdanjem. Iako ovaj softver nije prošao kroz potpuno testiranje kao softver sadržan u ovom izdanju, uključuje novije inačice nekih aplikacija koje mogu pružiti korisne značajke.

note: Type: boolean Description :sl2:
en: Proceed with installation to unclean target?
hr: Nastaviti instalaciju na nečisto odredište?

note: Type: boolean Description :sl2:
en: The target file system contains files from a past installation. These files could cause problems with the installation process, and if you proceed, some of the existing files may be overwritten.
hr: Odredišni datotečni sustav sadrži datoteke iz prošle instalacije. Te datoteke bi mogle prouzročiti probleme u postupku instaliranja, a ako nastavite, neke od postojećih datoteka bi mogle biti prebrisane.

note: Type: error Description :sl2:
en: No file system mounted on /target
hr: Nema datotečnog sustava montiranog na /target

note: Type: error Description :sl2:
en: Before the installation can proceed, a root file system must be mounted on /target. The partitioner and formatter should have done this for you.
hr: Prije nastavka instalacije, korijenski datotečni sustav mora biti montiran na /target. Programi za particioniranje i formatiranje su vam to trebali učiniti.

note: Type: error Description :sl2:
en: Not installing to unclean target
hr: Nema instalacije na nečisto odredište

note: Type: error Description :sl2:
en: The installation to the target file system has been canceled. You should go back and erase or format the target file system before proceeding with the install.
hr: Instalacija na odredišni datotečni sustav je prekinuta. Trebate se vratiti i obrisati ili formatirati odredišni datotečni sustav prije nastavka instalacije.

note: Type: error Description The base system is the minimal Debian system See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7 :sl2:
en: Cannot install base system
hr: Nemoguća instalacija osnovnog sustava

note: Type: error Description The base system is the minimal Debian system See http://www.debian.org/doc/debian-policy/ch-binary.html#s3.7 :sl2:
en: The installer cannot figure out how to install the base system. It found no installable image, and no valid mirror was configured.
hr: Instalacijski program ne može instalirati osnovni sustav. Nije pronađena instalirajuća slika i valjani zrcalni poslužitelj nije podešen.

note: Type: error Description :sl2: SUBST0 is a Release file name. SUBST0 is a Release.gpg file name SUBST0 is a gpg key ID SUBST0 is a filename SUBST0 is a filename or package name Debootstrap is a program name: should not be translated
en: Debootstrap Error
hr: Greška samoučitavanja

note: Type: error Description :sl2:
en: Failed to determine the codename for the release.
hr: Neuspjelo određivanje kôdnog naziva izdanja.

note: Type: error Description :sl2:
en: Failed to install the base system
hr: Neuspjela instalacija osnovnog sustava

note: Type: error Description :sl2:
en: The base system installation into /target/ failed.
hr: Instalacija osnovnog sustava na /target/ nije uspjela.

note: #-#-#-#-#  templates.pot (base-installer)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (clock-setup)  #-#-#-#-# Type: boolean #-#-#-#-#  templates.pot (depthcharge-tools-installer)  #-#-#-#-# Same as base-installer/kernel/failed-package-install. :sl4: #-#-#-#-#  templates.pot (g
en: Check /var/log/syslog or see virtual console 4 for the details.
hr: Za pojedinosti provjerite /var/log/syslog ili četvrtu konzolu.

note: Type: error Description :sl2:
en: Base system installation error
hr: Greška instalacije osnovnog sustava

note: Type: error Description :sl2:
en: The debootstrap program exited with an error (return value ${EXITCODE}).
hr: Program samoučitavanja prekinuo je rad uz grešku (povratna vrijednost ${EXITCODE}).

note: Type: error Description :sl2:
en: The debootstrap program exited abnormally.
hr: Program samoučitavanja prekinuo je rad nenormalno.

note: Type: error Description :sl2:
en: The following error occurred:
hr: Pojavila se sljedeća greška:

note: Type: error Description :sl2:
en: Unable to install the selected kernel
hr: Nemoguća instalacija odabranog kernela

note: Type: error Description :sl2:
en: An error was returned while trying to install the kernel into the target system.
hr: Pojavila se greška pri pokušaju instalacije kernela na odredišni sustav.

note: Type: error Description :sl2:
en: Kernel package: '${KERNEL}'.
hr: Paket kernela: '${KERNEL}'.

note: Type: select Choices :sl2:
en: none[ Do not translate what's inside the brackets and just put the translation for the word "none" in your language without any brackets. This "none" means "no kernel" ]
hr: nedostupan

note: Type: select Description :sl2:
en: Kernel to install:
hr: Kernel za instalaciju:

note: Type: select Description :sl2:
en: The list shows the available kernels. Please choose one of them in order to make the system bootable from the hard drive.
hr: Popis prikazuje dostupne kernele. Odaberite jedan kako biste učinili sustav sposobnim da se pokreće s čvrstog diska.

note: Type: boolean Description :sl2:
en: Continue without installing a kernel?
hr: Nastavi bez instalacije kernela?

note: Type: boolean Description :sl2:
en: No installable kernel was found in the defined APT sources.
hr: Nema pronađenog kernela za instalaciju na dostupnim APT izvorima.

note: Type: boolean Description :sl2:
en: You may try to continue without a kernel, and manually install your own kernel later. This is only recommended for experts, otherwise you will likely end up with a machine that doesn't boot.
hr: Možete pokušati nastaviti bez kernela i kasnije ručno instalirati svoj vlastiti kernel. Ovo se preporučuje jedino stručnjacima, u suprotnom ćete završiti sa sustavom koji se ne može pokrenuti.

note: Type: error Description :sl2:
en: Cannot install kernel
hr: Nemoguća instalacija kernela

note: Type: error Description :sl2:
en: The installer cannot find a suitable kernel package to install.
hr: Instalacijski program ne može pronaći prikladan paket kernela za instalaciju.

note: #-#-#-#-#  templates.pot (base-installer)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (depthcharge-tools-installer)  #-#-#-#-# Same as base-installer/kernel/failed-package-install. :sl4:
en: Unable to install ${PACKAGE}
hr: Ne mogu instalirati ${PACKAGE}

note: #-#-#-#-#  templates.pot (base-installer)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (depthcharge-tools-installer)  #-#-#-#-# Same as base-installer/kernel/failed-package-install. :sl4:
en: An error was returned while trying to install the ${PACKAGE} package onto the target system.
hr: Pojavila se greška pri pokušaju instalacije paketa ${PACKAGE} na odredišni sustav.

note: Type: error Description :sl2: SUBST0 is a Release file name.
en: Failed getting Release file ${SUBST0}.
hr: Neuspjelo preuzimanje datoteke izdanja ${SUBST0}.

note: Type: error Description :sl2: SUBST0 is a Release.gpg file name
en: Failed getting Release signature file ${SUBST0}.
hr: Neuspjelo preuzimanje potpisa datoteke izdanja ${SUBST0}.

note: Type: error Description :sl2: SUBST0 is a gpg key ID
en: Release file signed by unknown key (key id ${SUBST0})
hr: Datoteka izdanja potpisana je nepoznatim ključem (id ključa ${SUBST0})

note: Type: error Description :sl2:
en: Invalid Release file: no valid components.
hr: Neispravna datoteka izdanja: nema valjanih komponenti.

note: Type: error Description :sl2: SUBST0 is a filename
en: Invalid Release file: no entry for ${SUBST0}.
hr: Nevaljana datoteka izdanja: nema upisa za ${SUBST0}.

note: Type: error Description :sl2: SUBST0 is a filename or package name Debootstrap is a program name: should not be translated
en: Couldn't retrieve ${SUBST0}. This may be due to a network problem or bad media, depending on your installation method.
hr: Nemoguće je preuzeti ${SUBST0}. Ovo se može dogoditi zbog mrežnog problema ili zbog oštećenog medija, ovisno o vašem načinu instalacije.

note: Type: error Description :sl2: SUBST0 is a filename or package name Debootstrap is a program name: should not be translated
en: If you are installing from CD-R or CD-RW, burning the CD at a lower speed may help.
hr: Ako instalirate sa CD-R-a ili CD-RW-a, snimanje CD-a na manjoj brzini može biti od pomoći.

note: Type: error Description Debootstrap is a program name: should not be translated :sl2:
en: Debootstrap warning
hr: Upozorenje samopokretanja

note: Type: error Description Debootstrap is a program name: should not be translated :sl2:
en: Warning: ${INFO}
hr: Upozorenje: ${INFO}

note: Type: text Description SUBST0 is an url :sl2:
en: Retrying failed download of ${SUBST0}
hr: Neuspjelo ponovno preuzimanje ${SUBST0}

note: Type: select Choices :sl2:
en: critical
hr: kritična

note: Type: select Choices :sl2:
en: high
hr: visoka

note: Type: select Choices :sl2:
en: medium
hr: srednja

note: Type: select Choices :sl2:
en: low
hr: niska

note: Type: select Description :sl2:
en: Ignore questions with a priority less than:
hr: Zanemari pitanja čija je razina značaja manja od:

note: Type: select Description :sl2:
en: Packages that use debconf for configuration prioritize the questions they might ask you. Only questions with a certain priority or higher are actually shown to you; all less important questions are skipped.
hr: Paketi koji za podešavanje koriste debconf, pitanja koja vam upućuju dijele prema razini značaja. Pitanja onog značaja kojeg odredite, ili još većeg značaja, bit će vam postavljena, dok će sva manje značajna pitanja biti preskočena.

note: Type: select Description :sl2:
en: You can select the lowest priority of question you want to see:
     - 'critical' is for items that will probably break the system
        without user intervention.
     - 'high' is for items that don't have reasonable defaults.
     - 'medium' is for normal items that have reasonable defaults.
     - 'low' is for trivial items that have defaults that will work in
       the vast majority of cases.
hr: Odaberite najnižu razinu značaja pitanja koja želite vidjeti:
     - 'kritična' je za probleme koji će vjerojatno srušiti sustav
        bez utjecaja korisnika.
     - 'visoka' je za probleme koji nemaju zadane vrijednosti.
     - 'srednja' je za stvari koje imaju zadane vrijednosti.
     - 'niska' je za nevažne stvari koje će u premoćno najvećem broju
       slučajeva dobro raditi po zadanim vrijednostima.

note: Type: select Description :sl2:
en: For example, this question is of medium priority, and if your priority were already 'high' or 'critical', you wouldn't see this question.
hr: Primjerice, ovo pitanje je srednjeg značaja i da ste već odredili željenu razinu kao 'visoku' ili 'kritičnu', ne biste ga vidjeli.

note: Type: text Description :sl2:
en: Change debconf priority
hr: Promijeni debconf razinu značaja

note: Type: select Description :sl2:
en: Debian version to install:
hr: Debianova inačica za instalaciju:

note: Type: select Description :sl2:
en: Debian comes in several flavors. Stable is well-tested and rarely changes. Unstable is untested and frequently changing. Testing is a middle ground, that receives many of the new versions from unstable if they are not too buggy.
hr: Debian dolazi u nekoliko izdanja. Stabilno izdanje je dobro testirano i vrlo rijetko se mijenja. Nestabilno izdanje nije testirano i podložno je čestim promjenama. Testno izdanje je izdanje između Stabilnog i Nestabilnog izdanja, prima mnogo novih inačica paketa iz nestabilnog izdanja ako ne sadrže previše grešaka.

note: Type: select Description :sl2:
en: Only flavors available on the selected mirror are listed.
hr: Samo izdanja dostupna na odabranome zrcalnom poslužitelju su prikazana.

note: Type: boolean Description :sl2:
en: Go back and try a different mirror?
hr: Vrati se i pokušaj drugi zrcalni poslužitelj?

note: Type: boolean Description :sl2:
en: The specified (default) Debian version (${RELEASE}) is not available from the selected mirror. It is possible to continue and select a different release for your installation, but normally you should go back and select a different mirror that does support the correct version.
hr: Odabrana (zadana) Debian (${RELEASE}) inačica nije dostupna sa odabranog zrcalnog poslužitelja. Moguće je nastaviti i odabrati drugu inačicu za vašu instalaciju, ali u pravilu ćete se vratiti i odabrati drugi poslužitelj koji podržava ispravnu inačicu.

note: Type: error Description :sl2:
en: Bad archive mirror
hr: Neispravna zrcalna arhiva

note: Type: error Description :sl2:
en: An error has been detected while trying to use the specified Debian archive mirror.
hr: Pojavila se greška pri pokušaju korištenja zadanog zrcalnog poslužitelja Debian arhive.

note: Type: error Description :sl2:
en: Possible reasons for the error are: incorrect mirror specified; mirror is not available (possibly due to an unreliable network connection); mirror is broken (for example because an invalid Release file was found); mirror does not support the correct Debian version.
hr: Mogući razlozi za ovu grešku su: odabir neispravnog zrcalnog poslužitelja; poslužitelj nije dostupan (moguće zbog nepouzdanog mrežnog povezivanja); zrcalni poslužitelj nije ispravan (npr. jer je na njemu pronađena neispravna datoteka izdanja); zrcalni poslužitelj ne podržava ispravnu inačicu Debiana.

note: Type: error Description :sl2:
en: Additional details may be available in /var/log/syslog or on virtual console 4.
hr: Dodatne pojedinosti mogu biti dostupne u /var/log/syslog ili na virtualnoj konzoli 4.

note: Type: error Description :sl2:
en: Please check the specified mirror or try a different one.
hr: Provjerite odabrani poslužitelj ili probajte neki drugi.

note: Type: text Description :sl2:
en: oldstable
hr: zastarjela stabilna

note: Type: text Description :sl2:
en: stable
hr: stabilna

note: Type: text Description :sl2:
en: testing
hr: testirajuća

note: Type: text Description :sl2:
en: unstable
hr: nestabilna

note: Type: string Description :sl2:
en: Debian archive mirror directory:
hr: Direktorij zrcalne Debian arhive:

note: Type: string Description :sl2:
en: Please enter the directory in which the mirror of the Debian archive is located.
hr: Upišite direktorij u kojemu se nalazi zrcalna Debian arhiva.

note: Type: string Description :sl2:
en: FTP proxy information (blank for none):
hr: FTP proxy podaci (prazno ako su nedostupni):

note: Type: string Description :sl2:
en: If you need to use a FTP proxy to access the outside world, enter the proxy information here. Otherwise, leave this blank.
hr: Ako morate koristiti FTP proxy za pristup vanjskom svijetu, upišite proxy podatke ovdje. U suprotnome, ostavite prazno.

note: Type: select Default Translators, you should put here the ISO 3166 code of a country which you know hosts at least one Debian FTP mirror. Please check that the country really has a Debian FTP mirror before putting a random value here First check that the country you mention here is listed in https:/
en: US[ Default value for ftp]
hr: HR

note: Type: select Description :sl2:
en: Usually, ftp.<your country code>.debian.org is a good choice.
hr: Uobičajeno je '<oznaka vaše zemlje>.debian.org' dobar izbor.

note: Type: select Description :sl2:
en: Protocol for file downloads:
hr: Protokol za preuzimanje datoteka:

note: Type: select Description :sl2:
en: Please select the protocol to be used for downloading files. If unsure, select "http"; it is less prone to problems involving firewalls.
hr: Odaberite mrežni protokol za preuzimanje datoteka. Ako niste sigurni, odaberite "http"; manje je sklon problemima povezanim s vatrozidima.

note: Type: select Description :sl2:
en: Keyboard model:
hr: Model tipkovnice:

note: Type: select Description :sl2:
en: Please select the model of the keyboard of this machine.
hr: Odaberite model tipkovnice za ovo računalo.

note: Type: select Choices :sl2:
en: No temporary switch
hr: Nema privremene zamjene

note: Type: select Choices :sl2:
en: Both Logo keys
hr: Obje Logo tipke

note: Type: select Description :sl2:
en: Method for temporarily toggling between national and Latin input:
hr: Način za privremenu promjenu između nacionalnog i latinskog unosa:

note: Type: select Description :sl2:
en: When the keyboard is in national mode and one wants to type only a few Latin letters, it might be more appropriate to switch temporarily to Latin mode. The keyboard remains in that mode as long as the chosen key is kept pressed. That key may also be used to input national letters when the keyboard is in Latin mode.
hr: Kada je tipkovnica u nacionalnom načinu rada i pojedinac želi unijeti nekoliko latinskih znakova, bilo bi prikladnije da se privremeno prebaci na latinski način. Tipkovnica ostaje u tom načinu dok god je tipka pritisnuta. Ta se tipka može također koristiti za unos nacionalnih znakova kad je tipkovnica u latinskom načinu.

note: Type: select Description :sl2:
en: You can disable this feature by choosing "No temporary switch".
hr: Možete onemogućiti ovu mogućnost odabirom "Nema privremene zamjene".

note: Type: select Choices :sl2:
en: The default for the keyboard layout
hr: Zadani raspored tipkovnice

note: Type: select Choices :sl2:
en: No AltGr key
hr: Nema AltGr tipke

note: Type: select Choices :sl2:
en: Keypad Enter key
hr: Enter tipka na brojčanom dijelu

note: Type: select Choices :sl2:
en: Both Alt keys
hr: Obje tipke Alt

note: Type: select Description :sl2:
en: Key to function as AltGr:
hr: Tipka koja će raditi kao AltGr:

note: Type: select Description :sl2:
en: With some keyboard layouts, AltGr is a modifier key used to input some characters, primarily ones that are unusual for the language of the keyboard layout, such as foreign currency symbols and accented letters. These are often printed as an extra symbol on keys.
hr: Kod pojedinih rasporeda tipkovnice, AltGr je tipka promjene koja se koristi za upis nekih znakova, prvenstveno onih koji nisu uobičajeni za jezik rasporeda tipkovnice, kao što su simboli za stranu valutu i naglašena slova. Obično su ispisani kao dodatni simboli na tipkama.

note: Type: select Choices :sl2:
en: No compose key
hr: Nema tipke sastavljanja

note: Type: select Description :sl2:
en: Compose key:
hr: Tipka sastavljanja:

note: Type: select Description :sl2:
en: The Compose key (known also as Multi_key) causes the computer to interpret the next few keystrokes as a combination in order to produce a character not found on the keyboard.
hr: Tipka sastavljanja (poznata kao i Multi_key) čini da računalo interpretira sljedećih nekoliko pritisaka na tipke kao kombinaciju koja služi za stvaranje znaka koji se ne nalazi na tipkovnici.

note: Type: select Description :sl2:
en: On the text console the Compose key does not work in Unicode mode. If not in Unicode mode, regardless of what you choose here, you can always also use the Control+period combination as a Compose key.
hr: U tekstovnoj konzoli u Unikôdnom načinu rada tipka sastavljanja ne radi. Ako niste u Unikôdnom načinu rada, štogod ovdje odabrali, uvijek možete koristiti i kombinaciju Control+točka za tipku sastavljanja.

note: Type: text Description Main menu item Translators: keep it under 65 columns :sl2:
en: Check the integrity of installation media
hr: Provjeri ispravnost instalacijskog medija

note: Type: boolean Description :sl2:
en: Load drivers from removable media?
hr: Učitaj upravljačke programe s uklonjivog medija?

note: Type: boolean Description :sl2:
en: No device for installation media was detected.
hr: Nije otkriven niti jedan uređaj za instalacijski medij.

note: Type: boolean Description :sl2:
en: You may need to load additional drivers from removable media, such as a driver floppy or a USB stick. If you have these available now, insert the media, and continue. Otherwise, you will be given the option to manually select some modules.
hr: Možda trebate učitati dodatne upravljačke programe sa uklonjivih medija, kao što je disketa ili USB memorija. Ako imate takve medije, umetnite ih i nastavite. U suprotnome, imat ćete mogućnost ručnog odabira pojedinih modula.

note: Type: boolean Description :sl2:
en: Manually select a module and device for installation media?
hr: Ručno odaberi modul i uređaj za instalacijski medij?

note: Type: boolean Description :sl2:
en: No device for installation media (like a CD-ROM device) was detected.
hr: Nije pronađen uobičajeni uređaj za instalacijski medij (poput CD-ROM uređaja).

note: Type: boolean Description :sl2:
en: If your CD-ROM drive is an old Mitsumi or another non-IDE, non-SCSI CD-ROM drive, you should choose which module to load and the device to use. If you don't know which module and device are needed, look for some documentation or try a network installation.
hr: Možda imate stari Mitsumi CD-ROM ili neki drugi ne-IDE, ne-SCSI CD-ROM uređaj. U tome slučaju, trebate odabrati koji ćete modul učitati i uređaj koristiti. Ako to ne znate, pogledajte određenu dokumentaciju ili pokušajte mrežnu instalaciju.

note: Type: boolean Description :sl2:
en: Retry mounting installation media?
hr: Ponovno pokušaj montirati instalacijski medij?

note: Type: boolean Description :sl2:
en: Your installation media couldn't be mounted. When installing from CD-ROM, this probably means that the disk was not in the drive. If so you can insert it and try again.
hr: Vaš instalacijski medij se ne može montirati. Pri instalaciji s CD-ROM-a to vjerojatno znači da disk nije u uređaju. U tome slučaju, umetnite ga i pokušajte ponovno.

note: Type: select Description :sl2:
en: Module needed for accessing the installation media:
hr: Potreban modul za pristup instalacijskom mediju:

note: Type: select Description :sl2:
en: The automatic detection didn't find a drive for installation media. When installing from CD-ROM and you have an unusual CD-ROM drive (that is neither IDE nor SCSI), you can try to load a specific module.
hr: Automatska pretraga nije pronašla uređaj za instalacijski medij. Pri instalaciji s CD-ROM-a, ako imate neuobičajeni CD-ROM (niti IDE, niti SCSI), možete pokušati učitati odgovarajući modul.

note: Type: string Description :sl2:
en: Device file for accessing the installation media:
hr: Datoteka uređaja za pristup instalacijskom mediju:

note: Type: string Description :sl2:
en: In order to access your installation media (like your CD-ROM), please enter the device file that should be used. Non-standard CD-ROM drives use non-standard device files (such as /dev/mcdx).
hr: Upišite datoteku uređaja koja će se koristiti za pristup vašem instalacijskom mediju (poput vašeg CD-ROM uređaja). Neuobičajeni CD-ROM pogoni koriste neuobičajene datoteke uređaja (poput /dev/mcdx).

note: Type: string Description :sl2:
en: You may switch to the shell on the second terminal (ALT+F2) to check the available devices in /dev with "ls /dev". You can return to this screen by pressing ALT+F1.
hr: Možete se prebaciti u ljusku na drugoj konzoli (Alt+F2) kako bi provjerili koji su uređaji dostupni u /dev, pomoću "ls /dev". Vraćate se na ovaj zaslon pomoću Alt+F1.

note: Type: note Description :sl2:
en: Installation media detected
hr: Instalacijski medij otkriven

note: Type: note Description :sl2:
en: Autodetection of the installation media was successful. A drive has been found that contains '${cdname}'. The installation will now continue.
hr: Automatsko pretraživanje instalacijskih medija je uspjelo. Pronađen je pogon koji sadrži '${cdname}'. Instalacija će se sada nastaviti.

note: Type: error Description :sl2:
en: Incorrect installation media detected
hr: Neispravan instalacijski medij otkriven

note: Type: error Description :sl2:
en: The detected media cannot be used for installation.
hr: Otkriven medij se ne može koristiti za instalaciju.

note: Type: error Description :sl2:
en: Please provide suitable media to continue with the installation.
hr: Umetnite prikladan medij kako biste nastavili s instalacijom.

note: Type: error Description Translators: DO NOT TRANSLATE "Release". This is the name of a file. :sl2:
en: Error reading Release file
hr: Greška pri učitavanju datoteke izdanja

note: Type: error Description Translators: DO NOT TRANSLATE "Release". This is the name of a file. :sl2:
en: The installation media do not seem to contain a valid 'Release' file, or that file could not be read correctly.
hr: Instalacijski medij ne sadrži valjanu datoteku izdanja ili se datoteka ne može ispravno učitati.

note: Type: error Description Translators: DO NOT TRANSLATE "Release". This is the name of a file. :sl2:
en: You may try to repeat the media detection, but even if it does succeed the second time, you may experience problems later in the installation.
hr: Možete pokušati ponovno otkrivanje medija, ali čak ako to i uspije iz drugog pokušaja, mogli biste naići na probleme kasnije u instalaciji.

note: Type: text Description Item in the main menu to select this package Translators: keep below 55 columns. :sl2:
en: Detect and mount installation media
hr: Otkrij i montiraj instalacijski medij

note: Type: boolean Description :sl2:
en: Failed to copy file from installation media. Retry?
hr: Kopiranje datoteke s instalacijskog medija nije uspjelo. Pokušaj ponovno?

note: Type: boolean Description :sl2:
en: There was a problem reading data. Please make sure you have inserted the installation media correctly. If retrying does not work, you should check the integrity of your installation media (there is an associated entry in the main menu for that).
hr: Pojavio se problem u čitanju podataka. Provjerite je li instalacijski medij ispravno umetnut. Ako ponovni pokušaj ne uspije, trebali biste provjeriti ispravnost vašeg instalacijskog medija (za to postoji povezana stavka u glavnom izborniku).

note: Type: boolean Description :sl2:
en: Set the clock using NTP?
hr: Postavi sat koristeći NTP?

note: Type: boolean Description :sl2:
en: The Network Time Protocol (NTP) can be used to set the system's clock. Your system works best with a correctly set clock.
hr: Protokol mrežnog vremena (NTP) može se koristiti za postavljanje sata sustava. Vaš sustav radi najbolje, kad je sat točno podešen.

note: Type: string Description :sl2:
en: NTP server to use:
hr: NTP poslužitelj za korištenje:

note: Type: string Description :sl2:
en: The default NTP server is almost always a good choice, but if you prefer to use another NTP server, you can enter it here.
hr: Zadani NTP poslužitelj je skoro uvijek dobar izbor, ali ako želite koristiti neki drugi, možete ga upisati ovdje.

note: Type: boolean Description :sl2:
en: Wait another 30 seconds for hwclock to set the clock?
hr: Pričekajte još 30 sekundi kako bi hwclock postavio sat?

note: Type: boolean Description :sl2:
en: Setting the hardware clock is taking longer than expected. The 'hwclock' program used to set the clock may have problems talking to the hardware clock.
hr: Postavljanje sata u hardveru traje dulje nego što je očekivano. Program 'hwclock' koji se koristi za postavljanje sata možda ima problema u komunikaciji sa satom u hardveru.

note: Type: boolean Description :sl2:
en: If you choose to not wait for hwclock to finish setting the clock, this system's clock may not be set correctly.
hr: Ako ne nastavite čekati dok hwclock ne završi postavljanje sata, možda sat na ovom sustavu neće biti dobro postavljen.

note: Type: note Description :sl2: Type: text
en: Interactive shell
hr: Interaktivna ljuska

note: Type: note Description :sl2:
en: After this message, you will be running "ash", a Bourne-shell clone.
hr: Nakon ove poruke, naći ćete se u "ash" ljusci, klonu Bourne ljuske.

note: Type: note Description :sl2:
en: The root file system is a RAM disk. The hard disk file systems are mounted on "/target". The editor available to you is nano. It's very small and easy to figure out. To get an idea of what Unix utilities are available to you, use the "help" command.
hr: Korijenski datotečni sustav je RAM disk. Datotečni sustavi čvrstih diskova montirani su na "/target". Na raspolaganju vam je uređivač teksta nano, koji je vrlo malen i jednostavan za korištenje. Kako bi doznali koji su vam Unix alati na raspolaganju, upišite naredbu "help".

note: Type: note Description :sl2:
en: Use the "exit" command to return to the installation menu.
hr: Koristite naredbu "exit" za vraćanje u instalacijski izbornik.

note: Type: text Description Main menu item The translation should not exceed 55 columns except for languages that are only supported in the graphical version of the installer :sl2:
en: Exit installer
hr: Izlaz iz instalacijskog programa

note: Type: boolean Description :sl2:
en: Are you sure you want to exit now?
hr: Sigurno želite izaći odmah?

note: Type: boolean Description :sl2:
en: If you have not finished the install, your system may be left in an unusable state.
hr: Ako niste završili instalaciju, vaš sustav će možda ostati neupotrebljiv.

note: Type: error Description :sl2:
en: Terminal plugin not available
hr: Priključak za terminal je nedostupan

note: Type: error Description :sl2:
en: This build of the debian-installer requires the terminal plugin in order to display a shell. Unfortunately, this plugin is currently unavailable.
hr: Ovo izdanje debianovog instalacijskog programa zahtijeva priključak za terminal kako bi prikazao ljusku. Nažalost, taj priključak je trenutno nedostupan.

note: Type: error Description :sl2:
en: It should be available after reaching the "Loading additional components" installation step.
hr: Trebao bi biti dostupan u koraku instalacije pod nazivom "Učitavanje dodatnih komponenti".

note: Type: text Description :sl2:
en: Alternatively, you can open a shell by pressing Ctrl+Alt+F2. Use Alt+F5 to get back to the installer.
hr: Alternativno, možete otvoriti ljusku pritiskom Ctrl+Alt+F2. Koristite Alt+F5 za povratak u instalacijski program.

note: Type: error Description :sl3: :sl2:
en: Unable to configure GRUB
hr: Nemoguće podešavanje GRUBA

note: Type: string Description :sl2: Type: select
en: Device for boot loader installation:
hr: Uređaj za instalaciju učitača pokretanja:

note: Type: string Description :sl2: Type: select
en: You need to make the newly installed system bootable, by installing the GRUB boot loader on a bootable device. The usual way to do this is to install GRUB to your primary drive (UEFI partition/boot record). You may instead install GRUB to a different drive (or partition), or to removable media.
hr: Trebate učiniti vaš novo instalirani sustav sposobnim da se pokreće, instalacijom GRUB učitača pokretanja sustava na odgovarajući diskovni uređaj. Uobičajen način je instalacija GRUB učitača pokretanja sustava na vaš glavni disk (UEFI particija/zapis pokretanja). Možete ga instalirati i drugdje na disku, ili na drugi disk, ili čak i na disketu.

note: Type: string Description :sl2:
en: The device notation should be specified as a device in /dev. Below are some examples:
     - "/dev/sda" will install GRUB to your primary drive (UEFI partition/boot
       record);
     - "/dev/sdb" will install GRUB to a secondary drive (which may for instance
       be a thumbdrive);
     - "/dev/fd0" will install GRUB to a floppy.
hr: Uređaj bi trebao biti određen kao uređaj u /dev. U nastavku slijedi nekoliko primjera:
     - "/dev/sda" instalirati će GRUB na vaš glavni disk (UEFI particija/zapis
       pokretanja)
     - "/dev/sda2" instalirati će GRUB na drugi disk (što na primjer može biti
       USB memorija);
     - "/dev/fd0" instalirati će GRUB na disketu.

note: Type: password Description :sl2:
en: GRUB password:
hr: GRUB lozinka:

note: Type: password Description :sl2:
en: The GRUB boot loader offers many powerful interactive features, which could be used to compromise your system if unauthorized users have access to the machine when it is starting up. To defend against this, you may choose a password which will be required before editing menu entries or entering the GRUB command-line interface. By default, any user will still be able to start any menu entry without entering the password.
hr: GRUB učitač pokretanja nudi niz moćnih interaktivnih značajki, koje bi se mogle iskoristiti za kompromitiranje vašeg sustava ako neovlašteni korisnici imaju pristup sustavu tijekom pokretanja. Kako bi se obranili od toga, možete odabrati lozinku čiji će se upis zahtijevati prije uređivanja izbornika ili ulaska u GRUB naredbeni redak. Uobičajeno će svaki korisnik moći pokrenuti svaki izbor iz izbornika bez unošenja lozinke.

note: Type: password Description :sl2:
en: If you do not wish to set a GRUB password, leave this field blank.
hr: Ako ne želite postaviti GRUB lozinku, ostavite ovo polje prazno.

note: Type: password Description :sl2:
en: Please enter the same GRUB password again to verify that you have typed it correctly.
hr: Upišite istu GRUB lozinku kao potvrdu da ste ju ispravno utipkali.

note: #-#-#-#-#  templates.pot (grub-installer)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# :sl3: #-#-#-#-#  templates.pot (user-setup)  #-#-#-#-#
en: Password input error
hr: Greška upisa lozinke

note: #-#-#-#-#  templates.pot (grub-installer)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# :sl3: #-#-#-#-#  templates.pot (user-setup)  #-#-#-#-#
en: The two passwords you entered were not the same. Please try again.
hr: Lozinke koje ste upisali nisu jednake. Pokušajte ponovno.

note: Type: error Description :sl2:
en: GRUB installation failed
hr: Instalacija GRUBA nije uspjela

note: Type: error Description :sl2:
en: The '${GRUB}' package failed to install into /target/. Without the GRUB boot loader, the installed system will not boot.
hr: Paket '${GRUB}' se nije uspio instalirati u /target/. Bez GRUB učitača pokretanja, instalirani sustav se neće moći pokrenuti.

note: Type: error Description :sl2:
en: Unable to install GRUB in ${BOOTDEV}
hr: Nemoguća instalacija GRUBA u ${BOOTDEV}

note: Type: error Description :sl2:
en: Executing 'grub-install ${BOOTDEV}' failed.
hr: Pokretanje 'grub-install ${BOOTDEV}' nije uspjelo.

note: Type: error Description :sl2:
en: This is a fatal error.
hr: Ovo je kobna greška.

note: Type: error Description :sl2:
en: Executing 'update-grub' failed.
hr: Pokretanje 'update-grub' nije uspjelo.

note: Type: text Description Rescue menu item :sl2:
en: Reinstall GRUB boot loader
hr: Ponovno instalirajte GRUB učitača pokretanja

note: Type: text Description Rescue menu item :sl2:
en: Force GRUB installation to the EFI removable media path
hr: Prisili instalaciju GRUBA na EFI uklonjive medije

note: Type: select Choices :sl2:
en: no ethernet card
hr: nema mrežne kartice

note: Type: select Choices :sl2: "none of the above" should be understood as "none of the above choices"
en: none of the above
hr: ništa od navedenog

note: Type: select Description :sl2:
en: Driver needed by your Ethernet card:
hr: Upravljački program za vašu mrežnu karticu:

note: Type: select Description :sl2:
en: No Ethernet card was detected. If you know the name of the driver needed by your Ethernet card, you can select it from the list.
hr: Mrežna kartica nije pronađena. Ako znate naziv upravljačkog programa za vašu mrežnu karticu, odaberite ga s popisa.

note: Type: error Description :sl2:
en: Ethernet card not found
hr: Mrežna kartica nije pronađena

note: Type: error Description :sl2:
en: No Ethernet card was found on the system.
hr: Na sustavu nije pronađena mrežna karica.

note: Type: select Choices :sl2:
en: continue with no disk drive
hr: nastavi bez diskovnog uređaja

note: Type: select Description :sl2:
en: Driver needed for your disk drive:
hr: Upravljački program za vaš diskovni uređaj:

note: Type: select Description :sl2:
en: No disk drive was detected. If you know the name of the driver needed by your disk drive, you can select it from the list.
hr: Diskovni uređaj nije prepoznat. Ako znate naziv upravljačkog programa za vaš diskovni uređaj, odaberite ga s popisa.

note: Type: error Description :sl2:
en: No partitionable media
hr: Medij bez mogućnosti particioniranja

note: Type: error Description :sl2:
en: No partitionable media were found.
hr: Nema medija kojeg se može particionirati.

note: Type: error Description :sl2:
en: Please check that a hard disk is attached to this machine.
hr: Provjerite je li čvrsti disk spojen na ovo računalo.

note: Type: multiselect Description :sl2:
en: Modules to load:
hr: Moduli za učitavanje:

note: Type: multiselect Description :sl2:
en: The following Linux kernel modules were detected as matching your hardware. If you know some are unnecessary, or cause problems, you can choose not to load them. If you're unsure, you should leave them all selected.
hr: Pronađeni su sljedeći moduli Linux kernela koji odgovaraju vašem hardveru. Ako znate da su neki od njih nepotrebni, ili problematični, možete odrediti da se ne učitaju. Ako niste sigurni, ostavite ih sve.

note: Type: boolean Description FIXME: not in use and kept just while we're still in doubt it will be needed :sl2:
en: Start PC card services?
hr: Pokrenuti usluge PC kartica?

note: Type: boolean Description FIXME: not in use and kept just while we're still in doubt it will be needed :sl2:
en: Please choose whether PC card services should be started in order to allow the use of PCMCIA cards.
hr: Odaberite treba li pokrenuti usluge PC kartica kako bi omogućili korištenje PCMCIA kartica.

note: Type: string Description :sl2:
en: PCMCIA resource range options:
hr: Mogućnosti PCMCIA raspona resursa:

note: Type: string Description :sl2:
en: Some PCMCIA hardware needs special resource configuration options in order to work, and can cause the computer to freeze otherwise. For example, some Dell laptops need "exclude port 0x800-0x8ff" to be specified here. These options will be added to /etc/pcmcia/config.opts. See the installation manual or the PCMCIA HOWTO for more information.
hr: Neki PCMCIA hardver treba posebno podešavanje resursa kako bi radio, inače uzrokuje zastoj računala. Primjerice, određena Dell prijenosna računala ovdje trebaju naredbu "exclude port 0x800-0x8ff". Ta će podešavanja biti dodana u /etc/pcmcia/config.opts. Pogledajte u instalacijski priručnik ili u PCMCIA HOWTO za više informacija.

note: Type: string Description :sl2:
en: For most hardware, you do not need to specify anything here.
hr: Za većinu hardvera, ovdje ne trebate ništa odrediti.

note: Type: error Description :sl2:
en: Error while running '${CMD_LINE_PARAM}'
hr: Greška pri pokretanju '${CMD_LINE_PARAM}'

note: Type: boolean Description :sl2:
en: Load missing drivers from removable media?
hr: Učitaj upravljačke programe koji nedostaju s uklonjivog medija?

note: Type: boolean Description :sl2:
en: A driver for your hardware is not available. You may need to load drivers from removable media, such as a USB stick, or driver floppy.
hr: Upravljački program za vaš hardver nije pronađen. Možda trebate učitati odgovarajuće upravljačke programe s uklonjivih medija, kao što su USB uređaj ili disketa.

note: Type: boolean Description :sl2:
en: If you have such media available now, insert it, and continue.
hr: Ako imate takav medij, umetnite ga u pogon i nastavite.

note: Type: boolean Description :sl2:
en: Load missing firmware from removable media?
hr: Učitaj firmver koji nedostaje s uklonjivih medija?

note: Type: boolean Description :sl2:
en: Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.
hr: Dio vašeg hardvera treba vlasničke datoteke firmvera za rad. Firmver se može učitati s uklonjivih medija kao što su USB uređaj ili disketa.

note: Type: boolean Description :sl2:
en: The missing firmware files are: ${FILES}
hr: Datoteke firmvera koji nedostaje su: ${FILES}

note: Type: select Choices Possible locations for debug logs to be saved :sl2:
en: serve over network
hr: služi putem mreže

note: Type: select Choices Possible locations for debug logs to be saved :sl2:
en: mounted file system
hr: montirani datotečni sustav

note: Type: select Choices Possible locations for debug logs to be saved :sl2:
en: floppy
hr: disketa

note: Type: select Description :sl2:
en: How should the debug logs be saved or transferred?
hr: Kako bi trebali zapisi grešaka trebali biti spremljeni ili prenešeni?

note: Type: select Description :sl2:
en: Debugging log files for the installer are accessible in /var/log/. They can be served up over the network (a small webserver is started on this machine, to achieve that), saved to some mounted file system (like the one on a USB stick), or to a floppy.
hr: Zapisi otklanjanja grešaka instalacijskog programa dostupne su u /var/log/. Mogu se posluživati putem mreže (za to se na ovom stroju pokreće mali web-poslužitelj), spremiti u neki priključen datotečni sustav (USB stick) ili na disketu.

note: Type: string Description :sl2:
en: Directory in which to save debug logs:
hr: Direktorij za spremanje zapisa grešaka:

note: Type: string Description :sl2:
en: Please make sure the file system you want to save debug logs on is mounted before you continue.
hr: Provjerite je li datotečni sustav na koji želite spremiti zapise grešaka montiran prije nego što nastavite.

note: Type: error Description :sl2:
en: Cannot save logs
hr: Nemoguće spremanje zapisa

note: Type: error Description :sl2:
en: The directory "${DIR}" does not exist.
hr: Direktorij "${DIR}" ne postoji.

note: Type: note Description :sl2:
en: Insert formatted floppy in drive
hr: Umetnite formatiranu disketu u pogon

note: Type: note Description :sl2:
en: Log files and debug info will be copied into this floppy.
hr: Datoteke zapisa i informacije otklanjanja grešaka bit će kopirane na disketu.

note: Type: note Description :sl2:
en: The information will also be stored in /var/log/installer/ on the installed system.
hr: Ova informacija bit će spremljena i u direktorij /var/log/installer/ na instaliranom sustavu.

note: Type: text Description Main menu item Translators: keep below 55 columns :sl2:
en: Load installer components from an installer ISO
hr: Učitaj komponente instalacijskog programa s instalacijske ISO slike

note: Type: select Description :sl2:
en: System locale:
hr: Lokalizacija sustava:

note: Type: select Description :sl2:
en: Select the default locale for the installed system.
hr: Odaberite zadanu lokalizaciju za instalirani sustav.

note: Type: multiselect Description :sl2:
en: Additional locales:
hr: Dodatne lokalizacije:

note: Type: multiselect Description :sl2:
en: Based on your previous choices, the default locale currently selected for the installed system is '${LOCALE}'.
hr: Temeljeno na vašem prijašnjem odabiru, zadana lokalizacija za instalirani sustav je '${LOCALE}'.

note: Type: multiselect Description :sl2:
en: If you wish to use a different default or to also have other locales available, you may choose additional locales to be installed. If you are unsure it is best to just use the selected default.
hr: Ako želite koristiti drugačiju zadanu lokalizaciju ili su dostupne druge lokalizacije, možete odabrati dodatne lokalizacije za instalaciju. Ako niste sigurni, najbolji odabir je koristiti zadanu lokalizaciju.

note: Type: note Description :sl2:
en: locale
hr: lokalizacija

note: Type: note Description :sl2:
en: A locale determines character encoding and contains information on for example currency, date format and alphabetical sort order.
hr: Lokalizacija određuje kôdiranje znakova i sadrži informacije o npr. valuti, obliku datuma i poretku abecede.

note: Type: error Description :sl2:
en: Installation step failed
hr: Korak instalacije nije uspio

note: Type: error Description :sl2:
en: An installation step failed. You can try to run the failing item again from the menu, or skip it and choose something else. The failing step is: ${ITEM}
hr: Korak instalacije nije uspio. Možete ga pokušati ponovno pokrenuti ili ga preskočiti i odabrati nešto drugo. Neuspjeli korak je: ${ITEM}

note: Type: select Description :sl2:
en: Choose an installation step:
hr: Odaberite korak instalacije:

note: Type: select Description :sl2:
en: This installation step depends on one or more other steps that have not yet been performed.
hr: Ovaj korak instalacije ovisi o jednom ili više drugih koraka koji još nisu obavljeni.

note: Type: text Description :sl2:
en: Scanning removable media
hr: Pretraživanje uklonjivih medija

note: Type: text Description :sl2:
en: Cannot read removable media, or no drivers found.
hr: Nemoguće čitanje uklonjivog medija, ili upravljački programi nisu pronađeni.

note: Type: text Description :sl2:
en: There was a problem reading data from the removable media. Please make sure that the right media is present. If you continue to have trouble, your removable media might be bad.
hr: Pojavio se problem u čitanju podataka s uklonjivih medija. Pobrinite se da je ispravan medij prisutan. Ako u nastavku imate problema, vaš uklonjivi medij možda je oštećen.

note: Type: boolean Description :sl2:
en: Load drivers from removable media now?
hr: Učitaj upravljačke programe s uklonjivog medija?

note: Type: boolean Description :sl2:
en: You probably need to load drivers from removable media before continuing with the installation. If you know that the install will work without extra drivers, you can skip this step.
hr: Najvjerojatnije trebate učitati upravljačke programe s uklonjivih medija prije nastavka instalacije. Ako znate da će instalacija raditi bez dodatnih upravljačkih programa, možete preskočiti ovaj korak.

note: Type: boolean Description :sl2:
en: If you do need to load drivers, insert the appropriate removable media, such as a driver floppy or USB stick before continuing.
hr: Ako trebate učitati upravljačke programe, umetnite prikladan uklonjivi medij, poput diskete ili USB memorije koja sadrži upravljačke programe prije nastavka.

note: Type: text Description main-menu item Translators: keep below 55 columns :sl2:
en: Load drivers from removable media
hr: Učitaj upravljačke programe s uklonjivog medija

note: Type: boolean Description :sl2:
en: Unknown removable media. Try to load anyway?
hr: Nepoznat uklonjivi medij. Ipak pokušaj učitati?

note: Type: boolean Description :sl2:
en: Detected removable media that is not a known driver media. Please make sure that the correct media is inserted. You can still continue if you have an unofficial removable media you want to use.
hr: Otkriven uklonjivi medij koji ne sadrži poznate upravljačke programe. Osigurajte da je umetnut ispravan medij. Ipak možete nastaviti ako imate neslužbeni uklonjivi medij upravljačkih programa.

note: Type: text Description :sl2:
en: Please insert ${DISK_LABEL} ('${DISK_NAME}') first.
hr: Umetnite ${DISK_LABEL} ('${DISK_NAME}') najprije.

note: Type: text Description :sl2:
en: Due to dependencies between packages, drivers must be loaded in the correct order.
hr: Uslijed zavisnosti između paketa, upravljački program mora biti učitan ispravnim redoslijedom.

note: Type: boolean Description :sl2:
en: Load drivers from another removable media?
hr: Učitaj upravljačke programe s drugog uklonjivog medija?

note: Type: boolean Description :sl2:
en: To load additional drivers from another removable media, please insert the appropriate removable media, such as a driver floppy or USB stick before continuing.
hr: Kako bi učitali dodatne upravljačke programe s drugog uklonjivog medija, umetnite prikladan uklonjivi medij, poput diskete ili USB memorije koja sadrži upravljačke programe prije nastavka.

note: Type: string Description :sl2:
en: ${iface} is a wireless network interface. Please enter the name (the ESSID) of the wireless network you would like ${iface} to use. If you would like to use any available network, leave this field blank.
hr: ${iface} je bežično mrežno sučelje. Upišite naziv (ESSID) bežične mreže koju želite da ${iface} koristi. Ako želite koristiti bilo koju dostupnu mrežu, ostavite prazno.

note: Type: select Choices :sl2:
en: WEP/Open Network
hr: WEP/Otvorena mreža

note: Type: select Description :sl2:
en: Wireless network type for ${iface}:
hr: Vrsta bežične mreže za uređaj ${iface}:

note: Type: select Description :sl2:
en: Choose WEP/Open if the network is open or secured with WEP. Choose WPA/WPA2 if the network is protected with WPA/WPA2 PSK (Pre-Shared Key).
hr: Odaberite WEP/Open ako je mreža otvorena ili osigurana s WEP ključem. Odaberite WPA/WPA2 ako je mreža zaštićena s WPA/WPA2 PSK (Unaprijed dijeljeni ključ).

note: Type: string Description :sl2:
en: WEP key for wireless device ${iface}:
hr: WEP ključ za bežični uređaj ${iface}:

note: Type: string Description :sl2:
en: If applicable, please enter the WEP security key for the wireless device ${iface}. There are two ways to do this:
hr: Ako je potrebno, upišite sigurnosni WEP ključ za bežični uređaj ${iface}. To možete učiniti na dva načina:

note: Type: string Description :sl2:
en: If your WEP key is in the format 'nnnn-nnnn-nn', 'nn:nn:nn:nn:nn:nn:nn:nn', or 'nnnnnnnn', where n is a number, just enter it as it is into this field.
hr: Ako je vaš WEP ključ u formatu 'nnnn-nnnn-nn' 'nn:nn:nn:nn:nn:nn:nn:nn', ili 'nnnnnnnn', gdje je n broj, samo ga upišite u ovo polje kakav jest.

note: Type: string Description :sl2:
en: If your WEP key is in the format of a passphrase, prefix it with 's:' (without quotes).
hr: Ako je vaš WEP ključ u formatu lozinke, dodajte mu 's:' na početak (bez navodnika).

note: Type: string Description :sl2:
en: Of course, if there is no WEP key for your wireless network, leave this field blank.
hr: Naravno, ako nema WEP ključa za vašu bežičnu mrežu, ostavite prazno.

note: Type: error Description :sl2:
en: Invalid WEP key
hr: Neispravan WEP ključ

note: Type: error Description :sl2:
en: The WEP key '${wepkey}' is invalid. Please refer to the instructions on the next screen carefully on how to enter your WEP key correctly, and try again.
hr: WEP ključ '${wepkey}' je neispravan. Pozorno pročitajte upute na sljedećem zaslonu o tome kako ispravno unijeti WEP ključ i pokušajte ponovno.

note: Type: error Description :sl2:
en: Invalid passphrase
hr: Neispravna lozinka

note: Type: error Description :sl2:
en: The WPA/WPA2 PSK passphrase was either too long (more than 64 characters) or too short (less than 8 characters).
hr: WPA/WPA2 PSK lozinka je predugačka (više od 64 znaka) ili prekratka (manje od 8 znakova).

note: Type: string Description :sl2:
en: WPA/WPA2 passphrase for wireless device ${iface}:
hr: WPA/WPA2 lozinka za bežični uređaj ${iface}:

note: Type: string Description :sl2:
en: Enter the passphrase for WPA/WPA2 PSK authentication. This should be the passphrase defined for the wireless network you are trying to use.
hr: Upišite lozinku za WPA/WPA2 PSK ovjeru. Lozinku koja je određena za bežičnu mrežu koju želite koristiti.

note: Type: error Description :sl2:
en: Invalid ESSID
hr: Neispravni ESSID

note: Type: error Description :sl2:
en: The ESSID "${essid}" is invalid. ESSIDs may only be up to ${max_essid_len} characters, but may contain all kinds of characters.
hr: ESSID "${essid}" je neispravan. ESSID-i mogu biti veličine do ${max_essid_len} znaka i mogu sadržavati sve vrste znakova.

note: Type: text Description :sl2:
en: Attempting to exchange keys with the access point...
hr: Pokušaj razmjene ključeva s pristupnom točkom...

note: Type: text Description :sl2:
en: WPA/WPA2 connection succeeded
hr: WPA/WPA2 povezivanje uspješno

note: Type: note Description :sl2:
en: Failure of key exchange and association
hr: Neuspjela razmjena i pridruživanje ključa

note: Type: note Description :sl2:
en: The exchange of keys and association with the access point failed. Please check the WPA/WPA2 parameters you provided.
hr: Razmjena ključeva i pridruživanje pristupnoj točki nije uspjelo. Provjerite WPA/WPA2 parametre koje ste upisali.

note: Type: error Description :sl2:
en: Invalid hostname
hr: Neispravan naziv računala

note: Type: error Description :sl2:
en: The name "${hostname}" is invalid.
hr: Naziv "${hostname}" je neispravan.

note: Type: error Description :sl2:
en: A valid hostname may contain only the numbers 0-9, upper and lowercase letters (A-Z and a-z), and the minus sign. It must be at most ${maxhostnamelen} characters long, and may not begin or end with a minus sign.
hr: Za naziv računala koristite samo brojeve 0-9, velika i mala slova (A-Z i a-z), kao i znak minus. Naziv može sadržavati najviše ${maxhostnamelen} znakova i ne smije započeti ili završiti sa znakom minusa.

note: Type: error Description :sl2:
en: Error
hr: Greška

note: Type: error Description :sl2:
en: An error occurred and the network configuration process has been aborted. You may retry it from the installation main menu.
hr: Pojavila se greška i postupak podešavanja mreže je prekinut. Možete pokušati ponovno iz glavnog instalacijskog izbornika.

note: Type: error Description :sl2:
en: No network interfaces detected
hr: Nema prepoznatih mrežnih sučelja

note: Type: error Description :sl2:
en: No network interfaces were found. The installation system was unable to find a network device.
hr: Nema pronađenih mrežnih sučelja. Instalacijski sustav nije mogao pronaći mrežni uređaj.

note: Type: error Description :sl2:
en: You may need to load a specific module for your network card, if you have one. For this, go back to the network hardware detection step.
hr: Možda trebate učitati poseban modul za vašu mrežnu karticu, ako je imate. Za to se vratite natrag na korak prepoznavanja mrežnog hardvera.

note: Type: note Description A "kill switch" is a physical switch found on some network cards that disables the card. :sl2:
en: Kill switch enabled on ${iface}
hr: Kill prekidač omogućen na ${iface}

note: Type: note Description A "kill switch" is a physical switch found on some network cards that disables the card. :sl2:
en: ${iface} appears to have been disabled by means of a physical "kill switch". If you intend to use this interface, please switch it on before continuing.
hr: Izgleda da je ${iface} onemogućena koristeći fizički "kill" prekidač. Ako namjeravate koristiti ovo sučelje, uključite ga prije nego nastavite.

note: Type: select Choices :sl2: Note to translators : Please keep your translations of each choice below the 65 columns limit (which means 65 characters for most languages) Choices MUST be separated by commas You MUST use standard commas not special commas for your language You MUST NOT use commas inside
en: Infrastructure (Managed) network
hr: Infrastrukturna (upravljana) mreža

note: Type: select Choices :sl2: Note to translators : Please keep your translations of each choice below the 65 columns limit (which means 65 characters for most languages) Choices MUST be separated by commas You MUST use standard commas not special commas for your language You MUST NOT use commas inside
en: Ad-hoc network (Peer to peer)
hr: Ad-hoc (točka-u-točka) mreža

note: Type: select Description :sl2:
en: Type of wireless network:
hr: Vrsta bežične mreže:

note: Type: select Description :sl2:
en: Wireless networks are either managed or ad-hoc. If you use a real access point of some sort, your network is Managed. If another computer is your 'access point', then your network may be Ad-hoc.
hr: Bežične mreže su ili upravljane (stalne) ili ad-hoc. Ako koristite neku vrstu stvarne točke pristupa, vaša je mreža upravljana. Ako je vaša 'točka pristupa' drugo računalo, onda je vaša mreža ad-hoc.

note: Type: text Description :sl2:
en: Wireless network configuration
hr: Podešavanje bežične mreže

note: Type: text Description :sl2:
en: Searching for wireless access points...
hr: Pretraživanje bežičnih pristupnih točaka...

note: Type: text Description :sl2:
en: Detecting link on ${interface}; please wait...
hr: Prepoznavanje povezivanja na ${interface}; pričekajte...

note: Type: text Description :sl2:
en: <none>
hr: <nema>

note: Type: text Description :sl2:
en: Wireless ethernet (802.11x)
hr: Bežična mreža (802.11x)

note: Type: text Description :sl2:
en: wireless
hr: bežična

note: Type: text Description :sl2:
en: Ethernet
hr: Žična mreža

note: Type: text Description :sl2:
en: USB net
hr: USB mreža

note: Type: text Description :sl2:
en: Serial-line IP
hr: Serijska-linija IP

note: Type: text Description :sl2:
en: Parallel-port IP
hr: Paralelni-ulaz IP

note: Type: text Description :sl2:
en: Point-to-Point Protocol
hr: Točka-u-točka protokol

note: Type: text Description :sl2:
en: IPv6-in-IPv4
hr: IPv6-u-IPv4

note: Type: text Description :sl2:
en: ISDN Point-to-Point Protocol
hr: ISDN točka-u-točka protokol

note: Type: text Description :sl2:
en: Channel-to-channel
hr: Kanal-u-kanal

note: Type: text Description :sl2:
en: Real channel-to-channel
hr: Stvarni kanal-u-kanal

note: Type: text Description :sl2:
en: Inter-user communication vehicle
hr: Međukorisničko komunikacijsko sredstvo

note: Type: text Description :sl2:
en: Unknown interface
hr: Nepoznato sučelje

note: Type: error Description :sl2:
en: No DHCP client found
hr: Nema pronađenog DHCP klijenta

note: Type: error Description :sl2:
en: No DHCP client was found. Please make sure, that a DHCP installer component is installed.
hr: Nema pronađenog DHCP klijenta. Provjerite je li instalirana odgovarajuća DHCP komponenta instalacije.

note: Type: error Description :sl2:
en: The DHCP configuration process has been aborted.
hr: Postupak DHCP podešavanja je prekinut.

note: Type: boolean Description :sl2:
en: Continue without a default route?
hr: Nastavi bez zadane rute?

note: Type: boolean Description :sl2:
en: The network autoconfiguration was successful. However, no default route was set: the system does not know how to communicate with hosts on the Internet. This will make it impossible to continue with the installation unless you have the first image from a set of installation media, a 'Netinst' image, or packages available on the local network.
hr: Automatsko podešavanje mreže je uspjelo. Međutim, nije postavljena zadana ruta: sustav ne zna kako komunicirati s računalima na internetu. Zbog toga nećete moći nastaviti instalaciju, osim ako nemate prvu sliku instalacijskog medija iz skupa instalacijskih medija, 'Netinst' sliku, ili pakete dostupne na lokalnoj mreži.

note: Type: boolean Description :sl2:
en: If you are unsure, you should not continue without a default route: contact your local network administrator about this problem.
hr: Ako niste sigurni, ne biste trebali nastaviti bez zadane rute: obratite se svom mrežnom administratoru zbog tog problema.

note: Type: text Description IPv6 :sl2:
en: Attempting IPv6 autoconfiguration...
hr: Pokušaj IPV6 automatskog podešavanja...

note: Type: text Description IPv6 :sl2:
en: Waiting for link-local address...
hr: Čekanje adrese lokalnog povezivanja...

note: Type: text Description :sl2:
en: Configuring the network with DHCPv6
hr: Podešavanje mrežu pomoću DHCPv6

note: Type: error Description IPv6 :sl2:
en: Malformed IP address
hr: Neispravna IP adresa

note: Type: error Description IPv6 :sl2:
en: The value you provided is not a usable IPv4 or IPv6 address. Please consult your network administrator and try again.
hr: Vrijednost koju ste naveli nije upotrebljiva IPv4 ili IPv6 adresa. Obratite se vašem mrežnom administratoru i pokušajte ponovno.

note: Type: string Description :sl2:
en: Point-to-point address:
hr: Točka-u-točka adresa:

note: Type: string Description :sl2:
en: The point-to-point address is used to determine the other endpoint of the point to point network.  Consult your network administrator if you do not know the value.  The point-to-point address should be entered as four numbers separated by periods.
hr: Točka-u-točka adresa se koristi za određivanje druge krajnje točke u točka-u-točka mreži.  Obratite se vašem mrežnom administratoru ako ju ne znate.  Točka-u-točka adresa se sastoji od četiri broja, odvojena točkama.

note: Type: error Description :sl2:
en: Unreachable gateway
hr: Nedostupan pristupnik

note: Type: error Description :sl2:
en: The gateway address you entered is unreachable.
hr: Adresa pristupnika koju ste upisali nije dostupna.

note: Type: error Description :sl2:
en: You may have made an error entering your IP address, netmask and/or gateway.
hr: Možda ste pogriješili upisujući svoju IP adresu, mrežnu masku i/ili pristupnik.

note: Type: text Description Main menu item Translators: keep below 55 columns :sl2:
en: Download installer components
hr: Preuzimanje komponenti instalacijskog programa

note: Type: select Description :sl2:
en: The installer failed to download a file from the mirror. This may be a problem with your network, or with the mirror. You can choose to retry the download, select a different mirror, or cancel and choose another installation method.
hr: Instalacijski program nije uspio preuzeti datoteku sa zrcalnog poslužitelja. Možda je problem u vašoj mreži ili na zrcalnom poslužitelju. Možete pokušati ponovno preuzimanje, odabrati drugi poslužitelj ili prekinuti i pokušati neki drugi način instalacije.

note: #-#-#-#-#  templates.pot (network-console)  #-#-#-#-# Type: error Description :sl3: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# #-#-#-#-#  templates.pot (partman-iscsi)  #-#-#-#-# #-#-#-#-#  templates.pot (user-setup)  #-#-#-#-# :sl2:
en: Empty password
hr: Prazna lozinka

note: #-#-#-#-#  templates.pot (network-console)  #-#-#-#-# Type: error Description :sl3: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# #-#-#-#-#  templates.pot (partman-iscsi)  #-#-#-#-# #-#-#-#-#  templates.pot (user-setup)  #-#-#-#-# :sl2:
en: You entered an empty password, which is not allowed. Please choose a non-empty password.
hr: Upisali ste praznu lozinku, što nije dopušteno. Odaberite lozinku koja nije prazna.

note: #-#-#-#-#  templates.pot (partman-auto)  #-#-#-#-# Type: error Description :sl2: #-#-#-#-#  templates.pot (partman-auto-lvm)  #-#-#-#-# :sl3:
en: Failed to partition the selected disk
hr: Particioniranje odabranog diska nije uspjelo

note: Type: error Description :sl2:
en: This probably happened because the selected disk or free space is too small to be automatically partitioned.
hr: To se dogodilo vjerojatno zato što su odabrani disk ili slobodan prostor premali za automatsko particioniranje.

note: Type: error Description :sl2:
en: This probably happened because there are too many (primary) partitions in the partition table.
hr: To se dogodilo vjerojatno zato što ima previše (primarnih) particija u particijskoj tablici.

note: Type: error Description :sl2:
en: Unusable free space
hr: Neiskorišteni slobodni prostor

note: Type: error Description :sl2:
en: Partitioning failed because the chosen free space may not be used. There are probably too many (primary) partitions in the partition table.
hr: Particioniranje nije uspjelo jer odabrani slobodni prostor nije moguće koristiti. Vjerojatno ima previše (primarnih) particija u particijskoj tablici.

note: Type: text Description :sl2: TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
en: Small-disk (< 1GB) partitioning scheme
hr: Shema particioniranja za male diskove (<1GB)

note: Type: error Description :sl2:
en: Device in use
hr: Uređaj je u upotrebi

note: Type: error Description :sl2:
en: No modifications can be made to the device ${DEVICE} for the following reasons:
hr: Ne mogu se učiniti promjene na uređaju ${DEVICE} zbog sljedećih razloga:

note: Type: error Description :sl2:
en: Partition in use
hr: Particija je u upotrebi

note: Type: error Description :sl2: This should be translated as "partition *number* ${PARTITION}" In short, ${PARTITION} will indeed contain the partition NUMBER and not the partition NAME
en: No modifications can be made to the partition #${PARTITION} of device ${DEVICE} for the following reasons:
hr: Particija br. ${PARTITION} na uređaju ${DEVICE} se ne može mijenjati zbog sljedećih razloga:

note: Type: boolean Description :sl2:
en: Continue with the installation?
hr: Želite li nastaviti s instalacijom?

note: Type: boolean Description :sl2:
en: No partition table changes and no creation of file systems have been planned.
hr: Nema planiranih promjena particijskih tablica, niti stvaranja datotečnih sustava.

note: Type: boolean Description :sl2:
en: If you plan on using already created file systems, be aware that existing files may prevent the successful installation of the base system.
hr: Ako planirate koristiti već postojeće datotečne sustave, znajte da stare datoteke mogu spriječiti uspješnu instalaciju osnovnog sustava.

note: Type: text Description :sl2:
en: The following partitions are going to be formatted:
hr: Sljedeće particije će biti formatirane:

note: Type: text Description :sl2: for example: "partition #6 of IDE0 master as ext3 journaling file system"
en: partition #${PARTITION} of ${DEVICE} as ${TYPE}
hr: particija #${PARTITION} na ${DEVICE} kao ${TYPE}

note: Type: text Description :sl2: for devices which have no partitions for example: "LVM VG Debian, LV Root as ext3 journaling file system"
en: ${DEVICE} as ${TYPE}
hr: ${DEVICE} kao ${TYPE}

note: Type: text Description :sl2:
en: The partition tables of the following devices are changed:
hr: Promijenjene su particijske tablice sljedećih uređaja:

note: Type: select Description :sl2:
en: What to do with this device:
hr: Što učiniti sa ovim uređajem:

note: Type: select Description :sl2:
en: How to use this free space:
hr: Kako upotrijebiti ovaj slobodan prostor:

note: Type: select Description :sl2:
en: Partition settings:
hr: Postavke particije:

note: Type: select Description :sl2:
en: You are editing partition #${PARTITION} of ${DEVICE}. ${OTHERINFO} ${DESTROYED}
hr: Podešavate particiju #${PARTITION} na ${DEVICE}. ${OTHERINFO} ${DESTROYED}

note: Type: text Description :sl2:
en: This partition is formatted with the ${FILESYSTEM}.
hr: Ova particija formatirana je kao ${FILESYSTEM}.

note: Type: text Description :sl2:
en: No existing file system was detected in this partition.
hr: Na ovoj particiji nema postojećeg datotečnog sustava.

note: Type: text Description :sl2:
en: All data in it WILL BE DESTROYED!
hr: Svi podaci ĆE BITI UNIŠTENI!

note: Type: note Description :sl2:
en: The partition starts from ${FROMCHS} and ends at ${TOCHS}.
hr: Particija počinje na ${FROMCHS}, a završava na ${TOCHS}.

note: Type: note Description :sl2:
en: The free space starts from ${FROMCHS} and ends at ${TOCHS}.
hr: Slobodan prostor počinje na ${FROMCHS}, a završava na ${TOCHS}.

note: Type: text Description :sl2:
en: Show Cylinder/Head/Sector information
hr: Prikaži informacije cilindara/glava/sektora

note: Type: text Description :sl2:
en: Done setting up the partition
hr: Završi podešavanje particije

note: Type: text Description :sl2:
en: Dump partition info in %s
hr: Zapiši informacije o particijama u %s

note: Type: boolean Description :sl2:
en: Go back to the menu?
hr: Vrati se natrag u izbornik?

note: Type: boolean Description :sl2:
en: No file system is specified for partition #${PARTITION} of ${DEVICE}.
hr: Nije određen datotečni sustav za particiju #${PARTITION} na uređaju ${DEVICE}.

note: Type: boolean Description :sl2:
en: If you do not go back to the partitioning menu and assign a file system to this partition, it won't be used at all.
hr: Ako se ne vratite u izbornik particioniranja i ne odredite datotečni sustav za tu particiju, ona neće uopće biti korištena.

note: Type: text Description :sl2:
en: do not use the partition
hr: ne koristi particiju

note: Type: text Description up to 25 character positions :sl2:
en: Format the partition:
hr: Formatiraj particiju:

note: Type: text Description :sl2:
en: yes, format it
hr: da, formatiraj

note: Type: text Description :sl2:
en: no, keep existing data
hr: ne, zadrži postojeće podatke

note: Type: text Description :sl2:
en: do not use
hr: ne koristi

note: Type: text Description :sl2:
en: format the partition
hr: formatiraj particiju

note: Type: text Description :sl2:
en: keep and use the existing data
hr: zadrži i koristi postojeće podatke

note: Type: boolean Description :sl2:
en: Go back to the menu and correct errors?
hr: Vrati se u izbornik i ispravi greške?

note: Type: boolean Description :sl2:
en: The test of the file system with type ${TYPE} in partition #${PARTITION} of ${DEVICE} found uncorrected errors.
hr: Provjera datotečnog sustava vrste ${TYPE} na particiji #${PARTITION} uređaja ${DEVICE} otkrila je neispravljene greške.

note: Type: boolean Description :sl2:
en: If you do not go back to the partitioning menu and correct these errors, the partition will be used as is.
hr: Ako se ne vratite u izbornik particioniranja i ne ispravite greške, ta particija će biti korištena kakva jest.

note: Type: boolean Description :sl2:
en: The test of the swap space in partition #${PARTITION} of ${DEVICE} found uncorrected errors.
hr: Provjera swap prostora na particiji #${PARTITION} uređaja ${DEVICE} otkrila je neispravljene greške.

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: boolean Description :sl2: #-#-#-#-#  templates.pot (partman-ext3)  #-#-#-#-# #-#-#-#-#  templates.pot (partman-hfs)  #-#-#-#-#
en: Do you want to return to the partitioning menu?
hr: Želite li se vratiti u izbornik particioniranja?

note: Type: boolean Description :sl2:
en: You have not selected any partitions for use as swap space. Enabling swap space is recommended so that the system can make better use of the available physical memory, and so that it behaves better when physical memory is scarce. You may experience installation problems if you do not have enough physical memory.
hr: Niste odabrali nijednu particiju za upotrebu kao swap prostor. Upotreba swap prostora se preporučuje kako bi sustav mogao bolje iskorištavati dostupnu fizičku memoriju, i kako bi se bolje ponašao kada fizičke memorije ponestane. Mogli biste naići na probleme u instalaciji ako nemate dovoljno fizičke memorije.

note: Type: boolean Description :sl2:
en: If you do not go back to the partitioning menu and assign a swap partition, the installation will continue without swap space.
hr: Ako se ne vratite u izbornik particioniranja i ne odredite swap particiju, instalacijski proces će se nastaviti bez swap prostora.

note: Type: error Description :sl2:
en: Failed to create a file system
hr: Stvaranje datotečnog sustava nije uspjelo

note: Type: error Description :sl2:
en: The ${TYPE} file system creation in partition #${PARTITION} of ${DEVICE} failed.
hr: Stvaranje datotečnog sustava vrste ${TYPE} na particiji #${PARTITION} uređaja ${DEVICE} nije uspjelo.

note: Type: error Description :sl2:
en: Failed to create a swap space
hr: Stvaranje swap prostora nije uspjelo

note: Type: error Description :sl2:
en: The creation of swap space in partition #${PARTITION} of ${DEVICE} failed.
hr: Stvaranje swap prostora na particiji #${PARTITION} uređaja ${DEVICE} nije uspjelo.

note: Type: boolean Description :sl2:
en: No mount point is assigned for the ${FILESYSTEM} file system in partition #${PARTITION} of ${DEVICE}.
hr: Datotečnom sustavu ${FILESYSTEM} na particiji br. ${PARTITION} uređaja ${DEVICE} nije određena točka montiranja.

note: Type: boolean Description :sl2:
en: If you do not go back to the partitioning menu and assign a mount point from there, this partition will not be used at all.
hr: Ako se ne vratite u izbornik particioniranja i ne odredite točku montiranja, ta particija neće biti uopće korištena.

note: Type: error Description :sl2:
en: Invalid file system for this mount point
hr: Neispravan datotečni sustav za ovu točku montiranja

note: Type: error Description :sl2:
en: The file system type ${FILESYSTEM} cannot be mounted on ${MOUNTPOINT}, because it is not a fully-functional Unix file system. Please choose a different file system, such as ${EXT2}.
hr: Vrsta datotečnog sustava ${FILESYSTEM} se ne može montirati na ${MOUNTPOINT} jer to nije potpuno funkcionalan Unix datotečni sustav. Odaberite neki drugi datotečni sustav, npr. ${EXT2}.

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: / - the root file system
hr: / - korijenski datotečni sustav

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /boot - static files of the boot loader
hr: /boot - nepromjenjive datoteke učitača pokretanja

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /home - user home directories
hr: /home - osobni direktoriji korisnika

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /usr - static data
hr: /usr - nepromjenjivi podaci

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /var - variable data
hr: /var - promjenjivi podaci

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /srv - data for services provided by this system
hr: /srv - podaci za usluge koje pruža sustav

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /opt - add-on application software packages
hr: /opt - dodatni softverski paketi

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: /usr/local - local hierarchy
hr: /usr/local - lokalna hijerarhija

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: Enter manually
hr: Upiši ručno

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path :sl2:
en: Do not mount it
hr: Ne montiraj

note: Type: select Description Type: string :sl2:
en: Mount point for this partition:
hr: Točka montiranja za ovu particiju:

note: Type: error Description :sl2:
en: Invalid mount point
hr: Nevaljana točka montiranja

note: Type: error Description :sl2:
en: The mount point you entered is invalid.
hr: Točka montiranja koju ste upisali nije valjana.

note: Type: error Description :sl2:
en: Mount points must start with "/". They cannot contain spaces.
hr: Točke montiranja moraju početi sa "/" i ne mogu sadržavati razmake.

note: Type: string Description :sl2:
en: Label for the file system in this partition:
hr: Naziv datotečnog sustava na ovoj particiji:

note: Type: text Description :sl2:
en: Format the swap area:
hr: Formatiraj swap prostor:

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: text Description In the following context: "Format the partition: yes" :sl2: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# :sl3:
en: yes
hr: da

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: text Description In the following context: "Format the partition: no" :sl2: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# :sl3:
en: no
hr: ne

note: Type: text Description label of file system :sl2:
en: Label:
hr: Naziv:

note: Type: text Description for partman-basicfilesystems: in the following context: "Label: none" :sl2:
en: none[ Do not translate what's inside the brackets and just put the translation for the word "none" in your language without any brackets. This "none" relates to "Label:" ]
hr: nepoznat

note: Type: text Description Up to 24 character positions :sl2:
en: Reserved blocks:
hr: Pričuvni blokovi:

note: Type: string Description :sl2:
en: Percentage of the file system blocks reserved for the super-user:
hr: Postotak blokova datotečnog sustava pričuvnih za korijenskog korisnika:

note: Type: text Description :sl2: Up to 25 character positions
en: Typical usage:
hr: Tipičan način upotrebe:

note: Type: text Description :sl2: In the following context: "Typical usage: standard"
en: standard
hr: standardni

note: Type: select Description :sl2: Translate "standard" the same way as in the partman-basicfilesystems/text/typical_usage template.  Do not translate "news", "largefile" and "largefile4".
en: Typical usage of this partition:
hr: Tipičan način upotrebe ove particije:

note: Type: select Description :sl2: Translate "standard" the same way as in the partman-basicfilesystems/text/typical_usage template.  Do not translate "news", "largefile" and "largefile4".
en: Please specify how the file system is going to be used, so that optimal file system parameters can be chosen for that use.
hr: Odredite kako će datotečni sustav biti korišten, kako bi mogle biti određene najbolje datotečne postavke za njega.

note: Type: select Description :sl2: Translate "standard" the same way as in the partman-basicfilesystems/text/typical_usage template.  Do not translate "news", "largefile" and "largefile4".
en: standard = standard parameters, news = one inode per 4KB block, largefile = one inode per megabyte, largefile4 = one inode per 4 megabytes.
hr: standardni = uobičajeni parametri, news = jedna inoda po bloku od 4KB, largefile = jedna inoda po 1 MB, largefile4 = jedna inoda po 4 MB.

note: Type: text Description This is an item in the menu "Partition settings" :sl2:
en: Mount point:
hr: Točka montiranja:

note: Type: text Description :sl2: In the following context: "Mount point: none"
en: none[ Do not translate what's inside the brackets and just put the translation for the word "none" in your language without any brackets. This "none" relates to "Mount point:" ]
hr: nedostupna

note: Type: text Description :sl2:
en: Ext2 file system
hr: Ext2 datotečni sustav

note: Type: text Description :sl2:
en: FAT16 file system
hr: FAT16 datotečni sustav

note: Type: text Description :sl2:
en: FAT32 file system
hr: FAT32 datotečni sustav

note: Type: text Description :sl2:
en: NTFS journaling file system
hr: NTFS dnevnički datotečni sustav

note: Type: text Description :sl2:
en: swap area
hr: swap prostor

note: Type: text Description Type: multiselect :sl2:
en: Mount options:
hr: Mogućnosti montiranja:

note: Type: multiselect Description :sl2:
en: Mount options can tune the behavior of the file system.
hr: Mogućnosti montiranja određuju ponašanje datotečnog sustava.

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: noatime - do not update inode access times at each access
hr: noatime: ne nadopunjuj inode vremena pristupa pri svakom pristupu

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: nodiratime - do not update directory inode access times
hr: noatime: ne nadopunjuj inode vremena pristupa direktorija pri svakom pristupu

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: relatime - update inode access times relative to modify time
hr: relatime: nadopunjuj inode vremena pristupa u odnosu na vrijeme promjene

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: nodev - do not support character or block special devices
hr: nodev: ne podržavaj znakove ili posebne blok uređaje

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: nosuid - ignore set-user-identifier or set-group-identifier bits
hr: nosuid: zanemari set-user-identifier i set-group-identifier bitove

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: noexec - do not allow execution of any binaries
hr: noexec: ne dopusti pokretanje binarnih datoteka

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: ro - mount the file system read-only
hr: ro: montiraj datotečni sustav samo-za-čitanje

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: sync - all input/output activities occur synchronously
hr: sync: sve ulazne/izlazne aktivnosti se odvijaju usklađeno

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: usrquota - user disk quota accounting enabled
hr: usrquota: omogući računanje korisničkih diskovnih udjela

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: grpquota - group disk quota accounting enabled
hr: grpquota: omogući računanje grupnih diskovnih udjela

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: user_xattr - support user extended attributes
hr: user_xattr: podrška za dodatna korisnička svojstva

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: quiet - changing owner and permissions does not return errors
hr: quiet: mijenjanje vlasnika i dozvola ne pokazuje greške

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: notail - disable packing of files into the file system tree
hr: notail: onemogući pakiranje datoteka u stablo datotečnog sustava

note: Type: text Description :sl2: Note to translators: Please keep your translations of this string below a 65 columns limit (which means 65 characters in single-byte languages)
en: discard - trim freed blocks from underlying block device
hr: discard - odreži oslobođene blokove s osnovnog blokovskog uređaja

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: boolean Description :sl5: #-#-#-#-#  templates.pot (partman-ext3)  #-#-#-#-# :sl2: #-#-#-#-#  templates.pot (partman-hfs)  #-#-#-#-#
en: Go back to the menu and correct this problem?
hr: Vratite se u izbornik i ispravite taj problem?

note: #-#-#-#-#  templates.pot (partman-basicfilesystems)  #-#-#-#-# Type: boolean Description :sl5: #-#-#-#-#  templates.pot (partman-ext3)  #-#-#-#-# :sl2: #-#-#-#-#  templates.pot (partman-hfs)  #-#-#-#-#
en: If you do not go back to the partitioning menu and correct this error, the partition will be used as is. This means that you may not be able to boot from your hard disk.
hr: Ako se ne vratite u izbornik particioniranja i ne ispravite taj problem, ta particija će biti ostavljena kakva jest. To znači da možda nećete moći pokrenuti sustav s čvrstog diska.

note: Type: text Description :sl2: File system name
en: btrfs journaling file system
hr: btrfs dnevnički datotečni sustav

note: Type: error Description :sl2:
en: btrfs root file system not supported without separate /boot
hr: btrfs korijenski datotečni sustav nije podržan bez odvojene /boot particije

note: Type: error Description :sl2:
en: Your root file system is a btrfs file system. This is not supported by the boot loader used by default by this installer.
hr: Vaš korijenski datotečni sustav je btrfs. To nije podržano od strane učitača pokretanja koji je zadan ovim instalcijskim programom.

note: Type: error Description :sl2:
en: You should use a small /boot partition with another file system, such as ext4.
hr: Trebali biste koristiti malu /boot particiju s drugim datotečnim sustavom, recimo ext4.

note: Type: error Description :sl2:
en: btrfs file system not supported for /boot
hr: btrfs datotečni sustav ne podržava /boot

note: Type: error Description :sl2:
en: You have mounted a btrfs file system as /boot. This is not supported by the boot loader used by default by this installer.
hr: Montirali ste btrfs datotečni sustav kao /boot. To nije podržano od strane učitača pokretanja koji je zadan ovim instalcijskim programom.

note: Type: error Description :sl2:
en: You should use another file system, such as ext4, for the /boot partition.
hr: Trebali biste koristiti drugi datotečni sustav, poput ext4, za /boot particiju.

note: #-#-#-#-#  templates.pot (partman-cros)  #-#-#-#-# Type: boolean Description Users are familiar with boot methods as necessary to boot d-i itself. :sl4: #-#-#-#-#  templates.pot (partman-efi)  #-#-#-#-# :sl2:
en: Go back to the menu and resume partitioning?
hr: Vrati se u izbornik i nastavi particioniranje?

note: Type: boolean Description :sl2:
en: No EFI partition was found.
hr: Nije pronađena EFI particija.

note: Type: error Description :sl2:
en: EFI partition too small
hr: EFI particija je premala

note: Type: error Description :sl2:
en: EFI System Partitions on this architecture cannot be created with a size less than 35 MB. Please make the EFI System Partition larger.
hr: Nije moguće napraviti EFI sistemske particije za ovu arhitekturu manje od 35 MB. Molim napravite veću EFI sistemsku particiju.

note: Type: boolean Description :sl2:
en: Force UEFI installation?
hr: Prisilno izvrši UEFI instalaciju?

note: Type: boolean Description :sl2:
en: This machine's firmware has started the installer in UEFI mode but it looks like there may be existing operating systems already installed using "BIOS compatibility mode". If you continue to install Debian in UEFI mode, it might be difficult to reboot the machine into any BIOS-mode operating systems later.
hr: Firmware ovog računala je započeo instalaciju u UEFI načinu, ali vjerojatno postoje operacijski sustavi instalirani korištenjem "BIOS kompatibilnog načina". Ako želite instalirati Debian u UEFI načinu, možda ćete imati poteškoće prilikom startanja operacijskih sustava koji koriste BIOS način.

note: Type: boolean Description :sl2:
en: If you wish to install in UEFI mode and don't care about keeping the ability to boot one of the existing systems, you have the option to force that here. If you wish to keep the option to boot an existing operating system, you should choose NOT to force UEFI installation here.
hr: Ako želite instalirati u UEFI načinu i ne treba vam mogućnost učitavanja već postojećih sustava, možete ovdje prisilno izvršiti instalaciju. Ako vam treba navedena mogućnost, ovdje biste trebali izabrati da NE želite prisilno izvršiti UEFI instalaciju.

note: Type: text Description :sl2: File system name
en: Ext3 journaling file system
hr: Ext3 dnevnički datotečni sustav

note: Type: text Description :sl2: File system name
en: Ext4 journaling file system
hr: Ext4 dnevnički datotečni sustav

note: Type: boolean Description :sl2:
en: Your boot partition has not been configured with the ext2 or ext3 file system. This is needed by your machine in order to boot. Please go back and use either the ext2 or ext3 file system.
hr: Vaša particija pokretanja sustava nije podešena za ext2 ili ext3 datotečni sustav. To je potrebno vašem računalu radi pokretanja sustava. Vratite se i upotrijebite ext2 ili ext3 datotečni sustav.

note: Type: boolean Description :sl2:
en: Your boot partition is not located on the first primary partition of your hard disk. This is needed by your machine in order to boot.  Please go back and use your first primary partition as a boot partition.
hr: Vaša particija pokretanja nije prva primarna particija vašeg čvrstog diska. To je potrebno vašem računalu radi pokretanja sustava.  Vratite se i upotrijebite prvu primarnu particiju kao particiju pokretanja.

note: Type: boolean Description :sl2:
en: Return to the menu to set the bootable flag?
hr: Vrati se u izbornik i postavi 'bootable' oznaku pokretanja?

note: Type: boolean Description :sl2:
en: The boot partition has not been marked as a bootable partition, even though this is required by your machine in order to boot. You should go back and set the bootable flag for the boot partition.
hr: Vaša particija pokretanja nije označena kao 'bootable' particija. To je potrebno vašem računalu radi pokretanja sustava. Vratite se i postavite oznaku 'bootable' za particiju pokretanja.

note: Type: boolean Description :sl2:
en: If you don't correct this, the partition will be used as is and it is likely that the machine cannot boot from its hard disk.
hr: Ako ne ispravite taj problem, ta particija će biti ostavljena kakva jest i vjerojatno nećete moći pokrenuti sustav s čvrstog diska.

note: Type: boolean Description :sl2:
en: The partition ${PARTITION} assigned to ${MOUNTPOINT} starts at an offset of ${OFFSET} bytes from the minimum alignment for this disk, which may lead to very poor performance.
hr: Particija ${PARTITION} dodijeljena točki montiranja ${MOUNTPOINT} počinje uz pomak od ${OFFSET} bajtova u odnosu na minimalno poravnanje za ovaj disk, što može uzrokovati vrlo loše performanse.

note: Type: boolean Description :sl2:
en: Since you are formatting this partition, you should correct this problem now by realigning the partition, as it will be difficult to change later. To do this, go back to the main partitioning menu, delete the partition, and recreate it in the same position with the same settings. This will cause the partition to start at a point best suited for this disk.
hr: S obzirom da formatirate ovu particiju, ovaj problem biste trebali riješiti ponovnim poravnanjem particije, jer će ispravljanje ovog problema kasnije biti vrlo teško. Kako biste to učinili, vratite se na glavni izbornik particioniranja, obrišite particiju i stvorite je na istom položaju sa istim postavkama. Ovaj postupak će particiju postaviti na najbolji položaj za ovaj disk.

note: Type: text Description :sl2: File system name
en: Hierarchical File System
hr: Hijerarhijski datotečni sustav

note: Type: text Description :sl2: File system name
en: Hierarchical File System Plus
hr: Hijerarhijski datotečni sustav Plus

note: Type: boolean Description :sl2:
en: You have not configured an HFS partition that is mounted to /boot/grub. This is needed by your machine in order to be able to boot. Please go back and create an HFS partition that is mounted to /boot/grub.
hr: Niste konfigurirali HFS particiju koja je postavljena na /boot/grub. To je potrebno za pokretanje. Vratite se i stvorite HFS particiju koja je postavljena na /boot/grub.

note: Type: text Description File system name :sl2:
en: JFS journaling file system
hr: JFS dnevnički datotečni sustav

note: #-#-#-#-#  templates.pot (partman-md)  #-#-#-#-# Type: error Description :sl3: #-#-#-#-#  templates.pot (partman-partitioning)  #-#-#-#-# :sl2:
en: An error occurred while writing the changes to the storage devices.
hr: Pojavila se greška pri zapisivanju promjena na uređaje za pohranu.

note: Type: text Description :sl2:
en: Resizing partition...
hr: Promjena veličine particije...

note: Type: error Description :sl2:
en: The resize operation is impossible
hr: Promjena veličine nije moguća

note: Type: error Description :sl2:
en: Because of an unknown reason it is impossible to resize this partition.
hr: Iz nepoznatog razloga nije moguće promijeniti veličinu ove particije.

note: Type: boolean Description :sl2:
en: Write previous changes to disk and continue?
hr: Zapiši promjene na diskove i nastavi?

note: Type: boolean Description :sl2:
en: Before you can select a new partition size, any previous changes have to be written to disk.
hr: Sve prijašnje promjene moraju biti zapisane na disk prije nego što odaberete novu veličinu particije.

note: Type: boolean Description :sl2:
en: You cannot undo this operation.
hr: Ovaj postupak ne možete poništiti.

note: Type: boolean Description :sl2:
en: Please note that the resize operation may take a long time.
hr: Uzmite u obzir da postupak promjene veličine može potrajati.

note: Type: string Description :sl2:
en: New partition size:
hr: Nova veličina particije:

note: Type: string Description :sl2:
en: The minimum size for this partition is ${MINSIZE} (or ${PERCENT}) and its maximum size is ${MAXSIZE}.
hr: Najmanji raspoloživi prostor koji možete koristiti je ${MINSIZE} (ili ${PERCENT}), a najveći ${MAXSIZE}.

note: Type: error Description :sl2:
en: The size entered is invalid
hr: Veličina koju ste upisali nije valjana

note: Type: error Description :sl2:
en: The size you entered was not understood. Please enter a positive integer size followed by an optional unit of measure (e.g. "200 GB"). The default unit of measure is the megabyte.
hr: Veličina koju ste upisali je nerazumljiva. Upišite pozitivni cijeli broj te obaveznu jedinicu mjere (npr. "200 GB"). Podrazumijevana jedinica mjere je megabajt.

note: Type: error Description :sl2:
en: The size entered is too large
hr: Upisana veličina je prevelika

note: Type: error Description :sl2:
en: The size you entered is larger than the maximum size of the partition. Please enter a smaller size to continue.
hr: Veličina koju ste upisali je veća od najveće veličine particije. Upišite manju veličinu kako bi nastavili.

note: Type: error Description :sl2:
en: The size entered is too small
hr: Upisana veličina je premala

note: Type: error Description :sl2:
en: The size you entered is smaller than the minimum size of the partition. Please enter a larger size to continue.
hr: Veličina koju ste upisali je manja od najmanje veličine particije. upišite veću veličinu kako bi nastavili.

note: Type: error Description :sl2:
en: Resize operation failure
hr: Promjena veličine nije uspjela

note: Type: error Description :sl2:
en: The resize operation has been aborted.
hr: Postupak promjene veličine je prekinut.

note: Type: string Description :sl2:
en: The maximum size for this partition is ${MAXSIZE}.
hr: Najveći prostor za ovu particiju je ${MAXSIZE}.

note: Type: error Description :sl2:
en: Invalid size
hr: Nevaljana veličina

note: Type: multiselect Description :sl2:
en: Flags for the new partition:
hr: Oznake nove particije:

note: Type: string Description :sl2:
en: Partition name:
hr: Naziv particije:

note: Type: boolean Description :sl2:
en: Continue with partitioning?
hr: Nastavi s particioniranjem?

note: Type: boolean Description :sl2:
en: This partitioner doesn't have information about the default type of the partition tables on your architecture.  Please send an e-mail message to debian-boot@lists.debian.org with information.
hr: Ovaj program particioniranja ne zna odrediti odgovarajuću vrstu particijske tablice za vašu arhitekturu.  Pošaljite obavijest s informacijama o tome, e-poštom na debian-boot@lists.debian.org.

note: Type: boolean Description :sl2:
en: Please note that if the type of the partition table is unsupported by libparted, then this partitioner will not work properly.
hr: Uzmite u obzir da ako vrsta particijske tablice nije podržana u 'libparted' ovaj program particioniranja neće ispravno raditi.

note: Type: boolean Description :sl2:
en: This partitioner is based on the library libparted which doesn't have support for the partition tables used on your architecture.  It is strongly recommended that you exit this partitioner.
hr: Ovaj program particioniranja temelji se na 'libparted' biblioteci koja ne podržava particijsku tablicu potrebnu za vrstu vašeg računala. Morate prekinuti s radom.

note: Type: boolean Description :sl2:
en: If you can, please help to add support for your partition table type to libparted.
hr: Ako možete, pomozite da dodamo podršku za vašu vrstu particijske tablice u libparted.

note: Type: select Description :sl2:
en: Partition table type:
hr: Vrsta particijske tablice:

note: Type: select Description :sl2:
en: Select the type of partition table to use.
hr: Odaberite vrstu particijske tablice.

note: Type: boolean Description :sl2:
en: Create new empty partition table on this device?
hr: Stvori novu praznu particijsku tablicu na ovom uređaju?

note: Type: boolean Description :sl2:
en: You have selected an entire device to partition. If you proceed with creating a new partition table on the device, then all current partitions will be removed.
hr: Odabrali ste cijeli uređaj za particioniranje. Ako nastavite sa stvaranjem nove particijske tablice, sve postojeće particije bit će uklonjene.

note: Type: boolean Description :sl2:
en: Note that you will be able to undo this operation later if you wish.
hr: Uzmite u obzir da ćete kasnije moći poništiti promjene, ako to želite.

note: Type: boolean Description :sl2:
en: Write a new empty partition table?
hr: Zapiši novu praznu particijsku tablicu?

note: Type: boolean Description :sl2:
en: Because of limitations in the current implementation of the Sun partition tables in libparted, the newly created partition table has to be written to the disk immediately.
hr: Zbog ograničenja u podržavanju Sunove particijske tablice u trenutnoj inačici libparteda, nova particijska tablica mora odmah biti zapisana na disk.

note: Type: boolean Description :sl2:
en: You will NOT be able to undo this operation later and all existing data on the disk will be irreversibly removed.
hr: Taj postupak NEĆETE moći poništiti kasnije i svi postojeći podaci na disku biti će nepovratno uklonjeni.

note: Type: boolean Description :sl2:
en: Confirm whether you actually want to create a new partition table and write it to disk.
hr: Potvrdite želite li uistinu stvoriti novu particijsku tablicu i zapisati je na disk.

note: Type: boolean Description :sl2:
en: Are you sure you want a bootable logical partition?
hr: Sigurno želite pokretljivu 'bootable' logičku particiju?

note: Type: boolean Description :sl2:
en: You are trying to set the bootable flag on a logical partition. The bootable flag is generally only useful on primary partitions, so setting it on logical partitions is normally discouraged. Some BIOS versions are known to fail to boot if there is no bootable primary partition.
hr: Pokušavate postaviti oznaku 'bootable' na logičkoj particiji. Ta oznaka je općenito korisna samo na primarnim particijama, tako da se ne preporučuje postavljati je na logičkim particijama. Poznato je da neke inačice BIOSA ne uspijevaju pokrenuti sustav ako ne postoje primarne particije sa 'bootable' oznakom.

note: Type: boolean Description :sl2:
en: However, if you are sure that your BIOS does not have this problem, or if you are using a custom boot manager that pays attention to bootable logical partitions, then setting this flag may make sense.
hr: Ipak, ako ste sigurni da vaš BIOS nema takav problem, ili ako koristite posebnog upravitelja pokretanja sustava koji obraća pozornost na logičke particije označene kao 'bootable', onda postavljanje ove oznake može imati smisla.

note: Type: text Description :sl2:
en: Set the partition flags
hr: Postavi particijske oznake

note: Type: text Description :sl2:
en: Name:
hr: Naziv:

note: Type: text Description :sl2:
en: Bootable flag:
hr: Oznaka pokretanja:

note: Type: text Description :sl2:
en: on
hr: da

note: Type: text Description :sl2:
en: off
hr: ne

note: Type: text Description :sl2:
en: Resize the partition (currently ${SIZE})
hr: Promijeni veličinu particije (trenutno ${SIZE})

note: Type: text Description :sl2:
en: Delete the partition
hr: Obriši particiju

note: Type: text Description :sl2:
en: Create a new partition
hr: Stvori novu particiju

note: Type: text Description :sl2:
en: Create a new empty partition table on this device
hr: Stvori novu praznu particijsku tablicu na ovom uređaju

note: Type: error Description :sl2:
en: Identical labels for two file systems
hr: Istovjetni nazivi za dva datotečna sustava

note: Type: error Description :sl2:
en: Two file systems are assigned the same label (${LABEL}): ${PART1} and ${PART2}. Since file system labels are usually used as unique identifiers, this is likely to cause reliability problems later.
hr: Dva datotečna sustava imaju dodijeljene istovjetne nazive (${LABEL}): ${PART1} i ${PART2}. Budući da se nazivi datotečnih sustava obično koriste kao jedinstveni identifikatori, ovo će vjerojatno kasnije uzrokovati probleme s nepouzdanošću.

note: Type: error Description :sl2:
en: Please correct this by changing labels.
hr: Ispravite to promjenom naziva.

note: Type: error Description :sl2:
en: Identical mount points for two file systems
hr: Iste točke montiranja za dva datotečna sustava

note: Type: error Description :sl2:
en: Two file systems are assigned the same mount point (${MOUNTPOINT}): ${PART1} and ${PART2}.
hr: Dva datotečna sustava imaju istu točku montiranja (${MOUNTPOINT}): ${PART1} i ${PART2}.

note: Type: error Description :sl2:
en: Please correct this by changing mount points.
hr: Ispravite to promjenom točke montiranja.

note: Type: error Description :sl2:
en: No root file system
hr: Nema korijenskog datotečnog sustava

note: Type: error Description :sl2:
en: No root file system is defined.
hr: Nije određen korijenski datotečni sustav.

note: Type: error Description :sl2:
en: Please correct this from the partitioning menu.
hr: Ispravite to u izborniku particioniranja.

note: Type: error Description :sl2:
en: Separate file system not allowed here
hr: Odvojeni datotečni sustav ovdje nije dopušten

note: Type: error Description :sl2:
en: You assigned a separate file system to ${MOUNTPOINT}, but in order for the system to start correctly this directory must be on the root file system.
hr: Postavili ste odvojeni datotečni sustav na točku montiranja ${MOUNTPOINT}, ali taj direktorij mora biti na korijenskom datotečnom sustavu kako bi se sustav mogao pokrenuti.

note: Type: boolean Description :sl2:
en: Do you want to resume partitioning?
hr: Želite li nastaviti particioniranje?

note: Type: boolean Description :sl2:
en: The attempt to mount a file system with type ${TYPE} in ${DEVICE} at ${MOUNTPOINT} failed.
hr: Pokušaj montiranja datotečnog sustava vrste ${TYPE} na uređaj ${DEVICE} na točku montiranja ${MOUNTPOINT} nije uspio.

note: Type: boolean Description :sl2:
en: You may resume partitioning from the partitioning menu.
hr: Možete nastaviti particioniranje iz glavnog izbornika.

note: Type: select Description :sl2:
en: How to use this partition:
hr: Kako će se koristiti ova particija:

note: Type: text Description :sl2:
en: Use as:
hr: Koristi kao:

note: Type: text Description :sl2: File system name
en: XFS journaling file system
hr: XFS dnevnički datotečni sustav

note: Type: select Choices :sl2:
en: No automatic updates
hr: Bez automatskih nadopuna

note: Type: select Choices :sl2:
en: Install security updates automatically
hr: Instaliraj sigurnosne nadopune automatski

note: Type: select Description :sl2:
en: Updates management on this system:
hr: Upravljanje nadopunama na ovom sustavu:

note: Type: select Description :sl2:
en: Applying updates on a frequent basis is an important part of keeping the system secure.
hr: Redovno primjenjivanje nadopuna je bitan dio u održavanju sustava sigurnim.

note: Type: select Description :sl2:
en: By default, security updates are not automatically installed, as security advisories should be reviewed before manual installation of the updates using standard package management tools.
hr: Po zadanome, sigurnosne nadopune nisu automatski instalirane, po sigurnosnim napucima trebale bi biti pregledane prije ručne instalacije koristeći standardne alate upravljanja paketima.

note: Type: select Description :sl2:
en: Alternatively the unattended-upgrades package can be installed, which will install security updates automatically. Note however that automatic installation of updates may occasionally cause unexpected downtime of services provided by this machine in the rare cases where the update is not fully backward-compatible, or where the security advisory requires the administrator to perform some other manual operation.
hr: Alternativno se mogu instalirati paketi automatske nadogradnje, koji će instalirati sigurnosne nadopune automatski. Zapamtite da automatska instalacija nadopuna ponekada može prouzrokovati neočekivane zastoje usluga koje omogućuje ovo računalo u rijetkim slučajevima gdje nadopuna nije potpuno kompatibilna s prijašnjom inačicom ili gdje po sigurnosnim napucima zahtijeva administratorske ovlasti za izvođenje određenih ručnih radnji.

note: Type: error Description Translators : DO NOT TRANSLATE variable names : ALGORITHM, LOCATION and CHECKSUM :sl2:
en: Checksum error
hr: Greška jedinstvene vrijednosti

note: Type: error Description Translators : DO NOT TRANSLATE variable names : ALGORITHM, LOCATION and CHECKSUM :sl2:
en: The ${ALGORITHM} checksum of the file retrieved from <${LOCATION}> fails to match the expected value of "${CHECKSUM}".  The file may be corrupt, or the provided checksums may be out of date.
hr: ${ALGORITHM} jedinstvena vrijednost datoteke preuzeta sa <${LOCATION}> ne podudara se s očekivanom vrijednosti "${CHECKSUM}".  Datoteka je možda oštećena ili je pružena jedinstvena vrijednost zastarjela.

note: Type: error Description :sl2:
en: Failed to retrieve the preconfiguration file
hr: Neuspjelo preuzimanje datoteke predpodešavanja

note: Type: error Description :sl2:
en: The file needed for preconfiguration could not be retrieved from ${LOCATION}. The installation will proceed in non-automated mode.
hr: Datoteku potrebnu za predpodešavanje nije moguće preuzeti sa ${LOCATION}. Instalacija će se nastaviti u neautomatskom načinu rada.

note: Type: error Description :sl2:
en: Failed to process the preconfiguration file
hr: Neuspjela obrada datoteke predpodešavanja

note: Type: error Description :sl2:
en: The installer failed to process the preconfiguration file from ${LOCATION}. The file may be corrupt.
hr: Instalacijski program nije uspio učitati datoteku predpodešavanja sa ${LOCATION}. Datoteka bi mogla biti oštećena.

note: Type: error Description :sl2:
en: Failed to run preseeded command
hr: Neuspjelo pokretanje predodređene naredbe

note: Type: error Description :sl2:
en: Execution of preseeded command "${COMMAND}" failed with exit code ${CODE}.
hr: Pokretanje predodređene naredbe ("${COMMAND}") nije uspjelo uz izlazni kôd ${CODE}.

note: Type: title Description Info message displayed when running in rescue mode :sl2:
en: Rescue mode
hr: Način popravka

note: Type: boolean Description :sl2:
en: Create a normal user account now?
hr: Stvori odmah običan korisnički račun?

note: Type: boolean Description :sl2:
en: It's a bad idea to use the root account for normal day-to-day activities, such as the reading of electronic mail, because even a small mistake can result in disaster. You should create a normal user account to use for those day-to-day tasks.
hr: Loša je ideja koristiti korijenski račun za svakodnevne aktivnosti, primjerice čitanje i slanje e-pošte, jer vam i mala pogreška može učiniti veliku štetu. Zato trebate napraviti običan korisnički račun.

note: Type: error Description :sl2:
en: Invalid username
hr: Neispravno korisničko ime

note: Type: error Description :sl2:
en: The username you entered is invalid. Note that usernames must start with a lower-case letter, which can be followed by any combination of numbers and more lower-case letters, and must be no more than 32 characters long.
hr: Korisničko ime koje ste upisali je neispravno. Uzmite u obzir da korisnička imena moraju započeti s malim slovom, nakon kojega slijedi kombinacija brojeva i malih slova i ne smije biti duže od 32 znaka.

note: Type: error Description :sl2:
en: Reserved username
hr: Rezervirano korisničko ime

note: Type: error Description :sl2:
en: The username you entered (${USERNAME}) is reserved for use by the system. Please select a different one.
hr: Korisničko ime koje ste upisali (${USERNAME}) je rezervirano za korištenje sustava. Odaberite drugačije ime.
