Debian-installer 1st-stage master file HR - en to hr translation catalogue (650 entries)

note: Type: boolean Description :sl3:
en: Enable source repositories in APT?
hr: Omogući repozitorije izvora u APT-u?

note: Type: boolean Description :sl3:
en: By default source repositories are listed in /etc/apt/sources.list (with appropriate "deb-src" lines) so that "apt-get source" works. However, if you don't need this feature, you can disable those entries and save some bandwidth during "apt-get update" operations.
hr: Po zadanome repozitoriji izvora su prikazani u /etc/apt/sources.list (s odgovarajućim "deb-src" redcima) tako da preuzimanje izvornog kôda "apt-get source" radi. Ipak, ako vam ova značajka nije potrebna, možete onemogućite te upise i uštedjeti nešto mrežnog prometa tijekom radnje "apt-get update" preuzimanja nadopuna.

note: Type: select Description :sl3:
en: Tool to use to generate boot initrd:
hr: Alat kojim će se generirati initrd pokretanja:

note: Type: select Description :sl3:
en: The list shows the available tools. If you are unsure which to select, you should select the default. If your system fails to boot, you can retry the installation using the other options.
hr: Popis sadrži dostupne alate. Ako niste sigurni koji odabrati, odaberite zadani. Ako se vaš sustav ne uspije pokrenuti, možete pokušati instalaciju ponovno koristeći druge mogućnosti.

note: Type: error Description :sl3:
en: Unsupported initrd generator
hr: Nepodržani generator initrda

note: Type: error Description :sl3:
en: The package ${GENERATOR} that was selected to generate the initrd is not supported.
hr: Paket ${GENERATOR} koji je odabran za generiranje initrda nije podržan.

note: Type: select Choices :sl3:
en: generic: include all available drivers
hr: generic: uključi sve dostupne upravljačke programe

note: Type: select Choices :sl3:
en: targeted: only include drivers needed for this system
hr: targeted: uključi samo upravljačke programe potrebne za ovaj sustav

note: Type: select Description :sl3:
en: Drivers to include in the initrd:
hr: Upravljački programi koje treba uključiti u initrd:

note: Type: select Description :sl3:
en: The primary function of an initrd is to allow the kernel to mount the root file system. It therefore needs to contain all drivers and supporting programs required to do that.
hr: Glavni zadatak initrda je omogućiti kernelu montiranje korijenskog datotečnog sustava. Zato on treba sadržavati sve upravljačke programe i programe podrške koji su potrebni kako bi se to napravilo.

note: Type: select Description :sl3:
en: A generic initrd is much larger than a targeted one and may even be so large that some boot loaders are unable to load it but has the advantage that it can be used to boot the target system on almost any hardware. With the smaller targeted initrd there is a very small chance that not all needed drivers are included.
hr: Izvorni initrd je puno veći od odredišnoga i mogao bi biti toliko velik da ga neki učitači pokretanja neće moći učitati. Ipak, njegova prednost je u tome što može pokrenuti sustav na skoro svakom dostupnom hardveru. S manjim odredišnim initrdom postoji vrlo mala vjerojatnost da nisu uključeni svi potrebni upravljački programi.

note: Type: text Description :sl3:
en: Enter random characters
hr: Unesi naizmjenične znakove

note: Type: text Description :sl3:
en: You can help speed up the process by entering random characters on the keyboard, or just wait until enough key data has been collected (which can take a long time).
hr: Možete ubrzati proces unosom naizmjeničnih znakova na tipkovnici, ili jednostavno pričekajte dok se dovoljno ključnih podataka prikupi (što može potrajati dulje vrijeme).

note: Type: text Description :sl3:
en: Key data has been created successfully.
hr: Podaci ključa su uspješno stvoreni.

note: Type: text Description :sl3:
en: Enter random characters or make random movements with the mouse
hr: Unesi naizmjenične znakove ili naizmjenično pomičite svoj miš

note: Type: text Description :sl3:
en: You can help speed up the process by entering random characters on the keyboard or by making random movements with the mouse.
hr: Možete ubrzati proces unosom naizmjeničnih znakova na tipkovnici ili naizmjeničnim pomicanjem miša.

note: Type: text Description :sl3:
en: Resume installation
hr: Nastavi instalaciju

note: Type: text Description :sl3:
en: Choose "Continue" to really exit the shell and resume the installation; any processes still running in the shell will be aborted.
hr: Odaberite "Nastavi" kako bi izašli iz ljuske i nastavili instalaciju; svi trenutno pokrenuti procesi u ljusci će biti prekinuti.

note: Type: error Description :sl3:
en: Architecture not supported
hr: Arhitektura nije podržana

note: Type: error Description :sl3:
en: The specified Debian archive mirror does not seem to support your architecture. Please try a different mirror.
hr: Odabrani zrcalni poslužitelj Debian arhive ne podržava vašu arhitekturu. Pokušajte s drugim poslužiteljem.

note: Type: text Description :sl3:
en: Do not change the boot/kernel font
hr: Ne mijenjaj slova pokretanja/kernela

note: Type: text Description :sl3:
en: Let the system select a suitable font
hr: Prepusti odabir prikladnih slova sustavu

note: Type: text Description Used in the font size question like this: "12x24, framebuffer only" :sl3:
en: framebuffer only
hr: samo okvirni međuspremnik

note: Type: select Choices :sl3:
en: . Arabic
hr: . Aapski

note: Type: select Choices :sl3:
en: # Armenian
hr: # Armenski

note: Type: select Choices :sl3:
en: # Cyrillic - KOI8-R and KOI8-U
hr: # Ćirilica - KOI8-R i KOI8-U

note: Type: select Choices :sl3:
en: # Cyrillic - non-Slavic languages
hr: # Ćirilica - neslavenski jezici

note: Type: select Choices :sl3:
en: . Cyrillic - non-Slavic languages (for blind users)
hr: . Ćirilica - neslavenski jezici (za slijepe korisnike)

note: Type: select Choices :sl3:
en: # Cyrillic - Slavic languages (also Bosnian and Serbian Latin)
hr: # Ćirilica - slavenski jezici (uklj. bosanska i srpska latinica)

note: Type: select Choices :sl3:
en: . Cyrillic - Slavic languages (for blind users)
hr: . Ćirilica - slavenski jezici (za slijepe korisnike)

note: Type: select Choices :sl3:
en: . Ethiopic
hr: . Etiopski

note: Type: select Choices :sl3:
en: # Georgian
hr: # Gruzijski

note: Type: select Choices :sl3:
en: # Greek
hr: # Grčki

note: Type: select Choices :sl3:
en: . Greek (for blind users)
hr: . Grčki - (za slijepe korisnike)

note: Type: select Choices :sl3:
en: # Hebrew
hr: # Hebrejski

note: Type: select Choices :sl3:
en: # Lao
hr: # Laoski

note: Type: select Choices :sl3:
en: # Latin1 and Latin5 - western Europe and Turkic languages
hr: # Latin1 i Latin5 - latinica zapadne Europe i turski jezici

note: Type: select Choices :sl3:
en: # Latin2 - central Europe and Romanian
hr: # Latin2 - latinica srednje Europe i rumunjski

note: Type: select Choices :sl3:
en: # Latin3 and Latin8 - Chichewa; Esperanto; Irish; Maltese and Welsh
hr: # Latin3 i Latin8 - latinica čičeva; esperanto; irski; malteški i velški

note: Type: select Choices :sl3:
en: # Latin7 - Lithuanian; Latvian; Maori and Marshallese
hr: # Latin7 - latinica litavski; latvijski; maorski i maršalski

note: Type: select Choices :sl3:
en: . Latin - Vietnamese
hr: . Latin - latinica vijetnamski

note: Type: select Choices :sl3:
en: # Thai
hr: # Tajlandski

note: Type: select Choices :sl3:
en: . Combined - Latin; Slavic Cyrillic; Hebrew; basic Arabic
hr: . Kombinirani - latinica; slavenska ćirilica; hebrejski; osnovni arapski

note: Type: select Choices :sl3:
en: . Combined - Latin; Slavic Cyrillic; Greek
hr: . Kombinirani - latinica; slavenska ćirilica; grčki

note: Type: select Choices :sl3:
en: . Combined - Latin; Slavic and non-Slavic Cyrillic
hr: . Kombinirani - latinica; slavenska i neslavenska ćirilica

note: Type: select Choices :sl3:
en: Guess optimal character set
hr: Pogodi optimalan skup znakova

note: Type: select Description :sl3:
en: Character set to support:
hr: Podržani skup znakova:

note: Type: select Description :sl3:
en: Please choose the character set that should be supported by the console font.
hr: Odaberite skup znakova kojeg će podržavati slova konzole.

note: Type: select Description :sl3:
en: If you don't use a framebuffer, the choices that start with "." will reduce the number of available colors on the console.
hr: Ako ne koristite 'okvirni međuspremnik', izbori koji počinju sa "." će smanjiti broj dostupnih boja na konzoli.

note: Type: select Description The languages with many non-ASCII letters should not use formatted lists.  If you decide to use formatted lists then keep the lines relatively short. :sl3:
en: Font for the console:
hr: Slova konzole:

note: Type: select Description The languages with many non-ASCII letters should not use formatted lists.  If you decide to use formatted lists then keep the lines relatively short. :sl3:
en: If you prefer a bold version of the Terminus font, choose either TerminusBold (if you use a framebuffer) or TerminusBoldVGA (otherwise).
hr: Ako preferirate podebljanu inačicu Terminus slova, odaberite ili TerminusBold (ako koristite okvirni međuspremnik) ili TerminusBoldVGA (u suprotnome).

note: Type: select Description :sl3:
en: Font size:
hr: Veličina slova:

note: Type: select Description :sl3:
en: Please select the size of the font for the console. For reference, the font used when the computer boots has size 8x16.
hr: Odaberite veličinu slova konzole. Na primjer, slova koja se koriste pri pokretanju računala imaju veličinu 8x16.

note: Type: select Description :sl3:
en: Please select the size of the font for the console.  Some font sizes require framebuffer.
hr: Odaberite veličinu slova konzole. Neka slova zahtijevaju slikovni međuspremnik.

note: Type: select Description :sl3:
en: Encoding to use on the console:
hr: Kôdiranje znakova za korištenje na konzoli:

note: Type: boolean Description :sl3:
en: Keep the current keyboard layout in the configuration file?
hr: Zadrži trenutni raspored tipkovnice u datoteci podešavanja?

note: Type: boolean Description :sl3:
en: The current keyboard layout in the configuration file /etc/default/keyboard is defined as XKBLAYOUT="${XKBLAYOUT}" and XKBVARIANT="${XKBVARIANT}".
hr: Trenutni raspored tipkovnice u datoteci podešavanja /etc/default/keyboard je određen kao XKBLAYOUT="${XKBLAYOUT}" i XKBVARIANT="${XKBVARIANT}".

note: Type: boolean Description :sl3:
en: Please choose whether you want to keep it. If you choose this option, no questions about the keyboard layout will be asked and the current configuration will be preserved.
hr: Odaberite želite li ovaj raspored zadržati. Ukoliko odaberete ovu mogućnost, više neće biti postavljenih pitanja oko rasporeda tipkovnice, te će trenutne postavke biti očuvane.

note: Type: boolean Description :sl3:
en: Keep default keyboard layout (${XKBLAYOUTVARIANT})?
hr: Zadrži zadani (${XKBLAYOUTVARIANT}) raspored tipkovnice?

note: Type: boolean Description :sl3:
en: The default value for the keyboard layout is XKBLAYOUT="${XKBLAYOUT}" and XKBVARIANT="${XKBVARIANT}".  This default value is based on the currently defined language/region and the settings in /etc/X11/xorg.conf.
hr: Zadana vrijednost za raspored tipkovnice je XKBLAYOUT="${XKBLAYOUT}" i XKBVARIANT="${XKBVARIANT}".  Ova zadana vrijednost je temeljena na trenutno određenom jeziku/regiji i postavkama u /etc/X11/xorg.conf.

note: Type: boolean Description :sl3:
en: Please choose whether you want to keep it. If you choose this option, no questions about the keyboard layout will be asked.
hr: Odaberite želite li ovo zadržati. Ukoliko odaberete ovu mogućnost, neće više biti postavljenih pitanja oko rasporeda tipkovnice.

note: Type: boolean Description :sl3:
en: Keep current keyboard options in the configuration file?
hr: Zadržati trenutne mogućnosti tipkovnice u datoteci podešavanja?

note: Type: boolean Description :sl3:
en: The current keyboard options in the configuration file /etc/default/keyboard are defined as XKBOPTIONS="${XKBOPTIONS}".
hr: Trenutne mogućnosti tipkovnice u datoteci podešavanja /etc/default/keyboard su određene kao XKBOPTIONS="${XKBOPTIONS}".

note: Type: boolean Description :sl3:
en: If you choose to keep these options, no questions about the keyboard options will be asked.
hr: Ukoliko zadržite ove mogućnosti, neće više biti postavljenih pitanja oko mogućnosti tipkovnice.

note: Type: boolean Description :sl3:
en: Keep default keyboard options (${XKBOPTIONS})?
hr: Zadrži zadane mogućnosti tipkovnice (${XKBOPTIONS})?

note: Type: boolean Description :sl3:
en: The default value for the options of the keyboard layout is XKBOPTIONS="${XKBOPTIONS}".  It is based on the currently defined language/region and the settings in /etc/X11/xorg.conf.
hr: Zadana vrijednost mogućnosti rasporeda tipkovnice je XKBOPTIONS="${XKBOPTIONS}".  Temeljena je na trenutno određenom jeziku/regiji i postavkama u /etc/X11/xorg.conf.

note: Type: boolean Description :sl3:
en: If you choose to keep it, no questions about the keyboard options will be asked.
hr: Ukoliko zadržite ovo, neće više biti postavljenih pitanja oko mogućnosti tipkovnice.

note: Type: boolean Description :sl3:
en: Use Control+Alt+Backspace to terminate the X server?
hr: Želite li koristiti Control+Alt+Backspace za prekidanje izvođenja X poslužitelja?

note: Type: boolean Description :sl3:
en: By default the combination Control+Alt+Backspace does nothing.  If you want it can be used to terminate the X server.
hr: Kombinacija Control+Alt+Backspace prema zadanim postavkama ne čini ništa.  Ako želite, može se koristiti za prekidanje izvođenja X poslužitelja.

note: Type: boolean Description :sl3:
en: Check integrity of the installation media?
hr: Provjeri cjelovitost instalacijskog medija?

note: Type: boolean Description :sl3:
en: Warning: this check depends on your hardware and may take some time.
hr: Upozorenje: ova provjera ovisi o vašem hardveru i može potrajati.

note: Type: note Description :sl3:
en: Insert Debian installation media
hr: Umetni instalacijski medij za Debian

note: Type: note Description :sl3:
en: Please insert one of the official Debian installation media before continuing.
hr: Umetnite jedan od službenih Debianovih instalacijskih medija prije nastavka.

note: Type: error Description :sl3:
en: Failed to mount installation media
hr: Neuspjelo montiranje instalacijskog medija

note: Type: error Description :sl3:
en: The device '${CDROM}' could not be mounted correctly. Please check the media and cables, and try it again.
hr: Uređaj '${CDROM}' se ne može ispravno montirati. Provjerite medij, kablove i pokušajte ponovno.

note: Type: error Description :sl3:
en: No valid Debian installation media
hr: Nema valjanog Debianovog instalacijskog medija

note: Type: error Description :sl3:
en: What you have inserted is no valid Debian installation media. Please try again.
hr: Umetnuti medij nije valjan Debianov instalacijski medij. Pokušajte ponovno.

note: Type: error Description TRANSLATORS: MD5 is a file name, don't translate it. :sl3:
en: Failed to open checksum file
hr: Otvaranje datoteke kontrolnog zbroja nije uspjelo

note: Type: error Description TRANSLATORS: MD5 is a file name, don't translate it. :sl3:
en: Opening the MD5 file on the media failed. This file contains the checksums of the files located on the media.
hr: Otvaranje MD5 datoteke na mediju nije uspjelo. Ova datoteka sadrži kontrolni zbroj svih datoteka koje se nalaze na mediju.

note: Type: note Description :sl3:
en: Integrity test successful
hr: Provjera ispravnosti uspješna

note: Type: note Description :sl3:
en: The integrity test was successful. The installation image is valid.
hr: Provjera ispravnosti je uspjela. Instalacijska slika je valjana.

note: Type: error Description :sl3:
en: Integrity test failed
hr: Provjera ispravnosti nije uspjela

note: Type: error Description :sl3:
en: The file ${FILE} failed the MD5 checksum verification. Your installation media or this file may have been corrupted.
hr: Datoteka ${FILE} nije prošla MD5 provjeru. Vaš instalacijski medij ili ova datoteka su možda oštećeni.

note: Type: boolean Description :sl3:
en: Check the integrity of another installation image?
hr: Provjeri ispravnost druge instalacijske slike?

note: Type: note Description :sl3:
en: Insert Debian boot media
hr: Umetni medij za pokretanje Debiana

note: Type: note Description :sl3:
en: Please make sure you have inserted the Debian installation media you booted from, to continue with the installation.
hr: Provjerite jeste li umetnuli instalacijski medij za pokretanje Debiana, kako bi nastavili instalaciju.

note: Type: text Description :sl3:
en: Checking integrity of installation image
hr: Provjera cjelovitosti instalacijske slike

note: Type: text Description :sl3:
en: Checking file: ${FILE}
hr: Provjeravam datoteku: ${FILE}

note: Type: note Description :sl3:
en: UNetbootin media detected
hr: UNetbootin medij otkriven

note: Type: note Description :sl3:
en: It appears that your installation medium was generated using UNetbootin. UNetbootin is regularly linked with difficult or unreproducible problem reports from users; if you have problems using this installation medium, please try your installation again without using UNetbootin before reporting issues.
hr: Izgleda da je vaš instalacijski medij stvoren od strane UNetbootina. UNetbootin je uobičajeno povezan s teškim i neponovljivim problemima prijavljenima od strane korisnika, ako imate problema koristeći ovaj instalacijski medij, pokušajte pokrenuti ponovno instalaciju bez korištenja UNetbootin medija prije prijavljivanja problema.

note: Type: note Description :sl3:
en: The installation guide contains more information on how to create a USB installation medium directly without UNetbootin.
hr: Instalacijski vodič sadrži više informacija o stvaranju USB instalacijskog medija bez korištenja UNetbootina.

note: Type: title Description :sl3:
en: Kernel version mismatch
hr: Inačica Kernela se ne podudara

note: Type: error Description :sl3:
en: Live system kernel and installer kernel don't match
hr: Kernel live sustava i instalacijski program se ne podudaraju

note: Type: error Description :sl3: Both LIVE_KERNEL and DI_KERNEL are kernel version numbers, such as 2.6.32-5-486, 2.6.32-5-amd64, or 2.6.32-5-powerpc etc.
en: The installer can only be used if the kernel versions of the live system (${LIVE_KERNEL}) and of the installer (${DI_KERNEL}) are the same.
hr: Instalacijski program se može samo koristiti ako su inačice kernel live sustava (${LIVE_KERNEL}) i instalacijskog programa (${DI_KERNEL}) jednake.

note: Type: error Description :sl3: Both LIVE_KERNEL and DI_KERNEL are kernel version numbers, such as 2.6.32-5-486, 2.6.32-5-amd64, or 2.6.32-5-powerpc etc.
en: Please reboot with the correct kernel (${DI_KERNEL}).
hr: Ponovno pokrenite s ispravnim kernelom (${DI_KERNEL}).

note: Type: boolean Description :sl3:
en: Install the GRUB boot loader to the multipath device?
hr: Instaliraj GRUB učitača pokretanja na više uređaja?

note: Type: boolean Description :sl3:
en: Installation of GRUB on multipath is experimental.
hr: Instalacija GRUBA na više uređaja je eksperimentalna.

note: Type: boolean Description :sl3:
en: GRUB is always installed to the master boot record (MBR) of the multipath device. It is also assumed that the WWID of this device is selected as boot device in the system's FibreChannel adapter BIOS.
hr: GRUB se uvijek instalira na glavni zapis pokretanja više uređaja. Isto tako se podrazumijeva da je WWID ovog uređaja odabran kao uređaj za pokretanje sustava u BIOSU FibreChannel adaptera.

note: Type: boolean Description :sl3:
en: The GRUB root device is: ${GRUBROOT}.
hr: Osnovni GRUB korijenski uređaj je: ${GRUBROOT}.

note: Type: error Description :sl3:
en: An error occurred while setting up GRUB for the multipath device.
hr: Pojavila se greška pri podešavanju GRUBA za više uređaja.

note: Type: error Description :sl3:
en: The GRUB installation has been aborted.
hr: Instalacija GRUBA je prekinuta.

note: #-#-#-#-#  templates.pot (grub-installer)  #-#-#-#-# Type: select Choices #-#-#-#-#  templates.pot (iso-scan)  #-#-#-#-# :sl3:
en: Enter device manually
hr: Ručno upišite uređaj

note: Type: boolean Description :sl3:
en: Do you intend to use FireWire Ethernet?
hr: Planirate li koristiti FireWire mrežno sučelje?

note: Type: boolean Description :sl3:
en: No Ethernet card was detected, but a FireWire interface is present. It's possible, though unlikely, that with the right FireWire hardware connected to it, this could be your primary Ethernet interface.
hr: Nema pronađenih mrežnih kartica, ali dostupno je FireWire sučelje. Moguće je, iako nije vjerojatno, da s priključenim odgovarajućim FireWire hardverom, ovo može biti vaše glavno mrežno sučelje.

note: Type: string Description :sl3:
en: Additional parameters for module ${MODULE}:
hr: Dodatni parametri za modul ${MODULE}:

note: Type: string Description :sl3:
en: The module ${MODULE} failed to load. You may need to pass parameters to the module to make it work; this is common with older hardware. These parameters are often I/O port and IRQ numbers that vary from machine to machine and cannot be determined from the hardware. An example string looks something like "irq=7 io=0x220"
hr: Neuspjelo učitavanje modula ${MODULE}. Možda mu trebate zadati odgovarajuće parametre kako bi radio? To je normalno za stariji hardver. Ti parametri su obično I/U ulaz i IRQ brojevi koji variraju od sustava do sustava i ne mogu biti određeni prema hardveru. Primjerice, mogu izgledati ovako: "irq=7 io=0x220"

note: Type: string Description :sl3:
en: If you don't know what to enter, consult your documentation, or leave it blank to not load the module.
hr: Ako ne znate što unijeti, pogledajte dokumentaciju, ili ostavite prazno, pa modul neće biti učitan.

note: Type: text Description Main menu item Translators: keep below 55 columns :sl3:
en: Detect virtual driver disks from hardware manufacturer
hr: Prepoznavanje virtualnih uređaja diskova prema proizvođaču hardvera

note: Type: boolean Description :sl3:
en: Load drivers from internal virtual driver disk?
hr: Učitaj upravljačke programe sa unutrašnjeg virtualnog uređaja diska?

note: Type: boolean Description :sl3:
en: Installing on this hardware may require some drivers provided by the manufacturer to be loaded from the built-in driver injection disk.
hr: Instalacija na ovom hardveru može zahtijevati učitavanje određenih upravljačkih programa od proizvođača hardvera sa ugrađenog diska namijenjenog u tu svrhu.

note: Type: note Description :sl3:
en: Web server started, but network not running
hr: Web poslužitelj je pokrenut, ali mreža ne radi

note: Type: note Description :sl3:
en: A simple web server has been started on this computer to serve log files and debug info. However, the network is not set up yet. The web server will be left running, and will be accessible once the network is configured.
hr: Jednostavan web poslužitelj je pokrenut na ovom računalu kako bi omogućio pristup datotekama zapisa i informacijama otklanjanja grešaka. Ali mreža još nije postavljena. Web poslužitelj će ostati pokrenut i postati će dostupan jednom kada se mreža podesi.

note: Type: note Description :sl3:
en: Web server started
hr: Web poslužitelj je pokrenut

note: Type: note Description :sl3:
en: A simple web server has been started on this computer to serve log files and debug info. An index of all the available log files can be found at http://${ADDRESS}/
hr: Jednostavan web poslužitelj je pokrenut na ovom računalu kako bi omogućio pristup datotekama zapisa i informacijama otklanjanja grešaka. Popis svih dostupnih datoteka zapisa se mogu pronaći na http://${ADDRESS}/

note: Type: error Description :sl3:
en: Failed to mount the floppy
hr: Neuspjelo montiranje diskete

note: Type: error Description :sl3:
en: Either the floppy device cannot be found, or a formatted floppy is not in the drive.
hr: Ili se ne može pronaći disketni pogon, ili u njemu nije formatirana disketa.

note: Type: text Description :sl3:
en: Detecting hardware to find hard drives
hr: Prepoznavanje hardvera u svrhu pronalaska čvrstih diskova

note: Type: text Description :sl3:
en: Searching drives for an installer ISO image
hr: Pretraživanje pogona u svrhu pronalaska instalacijske ISO slike

note: Type: text Description :sl3:
en: Mounting ${DRIVE}...
hr: Montiram ${DRIVE}...

note: Type: text Description :sl3:
en: Scanning ${DRIVE} (in ${DIRECTORY})...
hr: Pretražujem ${DRIVE} (u ${DIRECTORY})...

note: Type: boolean Description :sl3:
en: Do full disk search for installer ISO image?
hr: Pretraži cijeli disk kako bi našao instalacijsku ISO sliku?

note: Type: boolean Description :sl3:
en: The quick scan for installer ISO images, which looks only in common places, did not find an installer ISO image. It's possible that a more thorough search will find the ISO image, but it may take a long time.
hr: Brzo pretraživanje za instalacijskom ISO slikom, koje se odvijalo samo na uobičajenim mjestima nije pronašlo ISO sliku. Moguće je da bi ga temeljitije pretraživanje pronašlo, ali to bi moglo potrajati.

note: Type: error Description :sl3:
en: Failed to find an installer ISO image
hr: Neuspjelo pretraživanje instalacijske ISO slike

note: Type: error Description :sl3:
en: No installer ISO images were found. If you downloaded the ISO image, it may have a bad filename (not ending in ".iso"), or it may be on a file system that could not be mounted.
hr: Nema pronađenih instalacijskih ISO slika. Ako ste preuzeli ISO sliku, možda ima pogrešan naziv datoteke (koje ne završava sa ".iso"), ili se nalazi na datotečnom sustavu koji se ne može montirati.

note: Type: error Description :sl3:
en: You'll have to use an alternative installation method, select another device to look for ISO image, or try again after you've fixed it.
hr: Trebat ćete koristiti alternativni način instalacije, odaberite drugi uređaj za pretraživanje ISO slike ili pokušajte ponovno nakon što ju popravite.

note: Type: error Description :sl3:
en: While one or more possible ISO images were found, they could not be mounted. The ISO image you downloaded may be corrupt.
hr: Iako je pronađena jedna ili više ISO slika, nije ih moguće montirati. ISO slike koje ste preuzeli možda su oštećene.

note: Type: error Description :sl3:
en: No installer ISO image found
hr: Nema pronađenih instalacijskih ISO slika

note: Type: error Description :sl3:
en: While one or more possible ISO images were found, they did not look like valid installer ISO images.
hr: Iako je pronađena jedna ili više ISO slika, ne izgledaju kao valjane instalacijske ISO slike.

note: Type: note Description :sl3:
en: Successfully mounted ${SUITE} installer ISO image
hr: Uspješno montirana ${SUITE} instalacijska ISO slika

note: Type: note Description :sl3:
en: The ISO file ${FILENAME} on ${DEVICE} (${SUITE}) will be used as the installation ISO image.
hr: ISO datoteka ${FILENAME} na ${DEVICE} (${SUITE}) biti će korištena kao instalacijska ISO slika.

note: Type: select Choices :sl3:
en: All detected devices
hr: Svi prepoznati uređaji

note: Type: select Description :sl3:
en: Device or partition to search for installation ISO(s):
hr: Uređaj ili particija gdje će se tražiti instalacijske ISO slike:

note: Type: select Description :sl3:
en: You can select a device, manually specify a non-detected device, or rescan available devices (useful for slow USB devices).
hr: Možete odabrati uređaj, ručno odrediti neotkriveni uređaj ili ponovno pretražiti dostupne uređaje (korisno za spore USB uređaje).

note: Type: string Description :sl3:
en: Device name:
hr: Naziv uređaja:

note: Type: select Choices :sl3:
en: Full search
hr: Potpuno pretraživanje

note: Type: select Description :sl3:
en: ISO file to use:
hr: ISO datoteka koja će se koristiti:

note: Type: select Description :sl3:
en: One or multiple ISO files have been detected on the selected device(s). Please choose which one you want to use, or ask for a more thorough search.
hr: Jedna ili više ISO datoteka je pronađeno na odabranim uređajima. Odaberite koju želite koristiti ili zatražite temeljitije pretraživanje.

note: Type: boolean Description :sl3:
en: Is ISO file ${FILENAME} the correct image for installation?
hr: Je li ISO datoteka ${FILENAME} ispravna instalacijska slika?

note: Type: boolean Description :sl3:
en: The ISO file ${FILENAME} on ${DEVICE} (${SUITE}, code ${CODENAME}, self-described as '${DESCRIPTION}') will be used as the installation ISO image.
hr: ISO datoteka ${FILENAME} na ${DEVICE} (${SUITE}, kôdnog naziva ${CODENAME} i opisom '${DESCRIPTION}') će se koristiti kao instalacijska ISO slika.

note: Type: boolean Description :sl3:
en: If multiple ISO files exist on the same installer drive, you may select which one you want to use.
hr: Ako postoji više ISO datoteka na instalacijskom uređaju, možete odabrati koju ćete koristiti.

note: Type: boolean Description :sl3:
en: Copy the ISO image into RAM before mounting it?
hr: Kopiraj ISO sliku u RAM prije montiranja?

note: Type: boolean Description :sl3:
en: There is enough available memory to be able to copy the ISO image into RAM.
hr: Slobodne memorije je dovoljno za kopiranje ISO slike u RAM.

note: Type: boolean Description :sl3:
en: Choosing this option allows reusing the disk hosting the ISO image. If you don't do it, the disk will be actively used to access the ISO image and it can't be partitioned by the installer.
hr: Odabir ove mogućnosti omogućuje ponovno korištenje diska koji sadrži ISO slike. Ako ju ne odaberete, disk će se aktivno koristiti za pristup ISO slici i neće se moći particionirati u instalacijskom programu.

note: Type: boolean Description :sl3:
en: Note however that if you overwrite the disk containing the ISO image, you should not reboot before the end of the installation as you will not be able to restart the installer since the ISO image will be gone from the hard disk and memory.
hr: Ipak, uzmite u obzir da ako prebrišete disk koji sadrži ISO slike, ne bi trebali ponovno pokrenuti računalo prije završetka instalacije zato jer nećete ponovno moći pokrenuti instalacijski program budući da će ISO slika nestati iz čvrstog diska i memorije.

note: Type: boolean Description :sl3:
en: Activate existing volume groups?
hr: Aktiviraj postojeće grupe uređaja?

note: Type: boolean Description :sl3:
en: ${COUNT} existing volume groups have been found. Please indicate whether you want to activate them.
hr: ${COUNT} postojećih grupa uređaja je pronađeno. Naznačite želite li ih aktivirati.

note: Type: select Choices :sl3: LVM main menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path
en: Modify volume groups (VG)
hr: Prilagodi grupe uređaja (GU)

note: Type: select Choices :sl3: LVM main menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path
en: Modify logical volumes (LV)
hr: Prilagodi logičke uređaje (LU)

note: Type: select Choices :sl3: LVM main menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path Volume groups configurati
en: Leave
hr: Ostavi netaknuto

note: Type: select Description :sl3:
en: LVM configuration action:
hr: Radnja podešavanja za ULU:

note: Type: select Description :sl3:
en: This is the Logical Volume Manager configuration menu.
hr: Ovo je izbornik podešavanja Upravitelja logičkim uređajima.

note: Type: select Choices :sl3: Volume groups configuration menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path
en: Create volume groups
hr: Stvori grupe uređaja

note: Type: select Choices :sl3: Volume groups configuration menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path
en: Delete volume groups
hr: Obriši grupe uređaja

note: Type: select Choices :sl3: Volume groups configuration menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path
en: Extend volume groups
hr: Povećaj grupe uređaja

note: Type: select Choices :sl3: Volume groups configuration menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path
en: Reduce volume groups
hr: Smanji grupe uređaja

note: Type: select Description :sl3:
en: Volume groups configuration action:
hr: Radnje podešavanja grupe uređaja:

note: Type: select Choices :sl3: Logical volumes configuration menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path
en: Create logical volumes
hr: Stvori logičke uređaje

note: Type: select Choices :sl3: Logical volumes configuration menu choices Translators : please use infinitive form or the equivalent in your language Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) including the initial path
en: Delete logical volumes
hr: Obriši logičke uređaje

note: Type: select Description :sl3:
en: Logical volumes configuration action:
hr: Radnje podešavanja logičkih uređaja:

note: Type: multiselect Description :sl3:
en: Devices for the new volume group:
hr: Uređaji za novu grupu uređaja:

note: Type: multiselect Description :sl3:
en: Please select the devices for the new volume group.
hr: Odaberite uređaje za novu grupu uređaja.

note: #-#-#-#-#  templates.pot (lvmcfg)  #-#-#-#-# Type: multiselect Description :sl3: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# #-#-#-#-#  templates.pot (partman-lvm)  #-#-#-#-#
en: You can select one or more devices.
hr: Možete odabrati jedan ili više uređaja.

note: Type: string Description :sl3:
en: Volume group name:
hr: Naziv grupe uređaja:

note: Type: string Description :sl3:
en: Please enter the name you would like to use for the new volume group.
hr: Upišite naziv koji želite koristiti za novu grupu uređaja.

note: #-#-#-#-#  templates.pot (lvmcfg)  #-#-#-#-# Type: error Description :sl3: #-#-#-#-#  templates.pot (partman-lvm)  #-#-#-#-#
en: No physical volumes selected
hr: Nema odabranih fizičkih uređaja

note: Type: error Description :sl3:
en: No physical volumes were selected. The creation of a new volume group was aborted.
hr: Nema odabranih fizičkih uređaja. Stvaranje nove grupe uređaja je prekinuto.

note: Type: error Description :sl3:
en: No volume group name entered
hr: Nema upisanog naziva grupe uređaja

note: Type: error Description :sl3:
en: No name for the volume group has been entered.  Please enter a name.
hr: Nema upisanog naziva grupe uređaja.  Upišite naziv.

note: Type: error Description :sl3:
en: Volume group name already in use
hr: Naziv grupe uređaja već se koristi

note: #-#-#-#-#  templates.pot (lvmcfg)  #-#-#-#-# Type: error Description :sl3: #-#-#-#-#  templates.pot (partman-auto-lvm)  #-#-#-#-# Type: string
en: The selected volume group name is already in use. Please choose another name.
hr: Odabrani naziv grupe uređaja već se koristi. Odaberite drugi naziv.

note: Type: error Description :sl3:
en: Volume group name overlaps with device name
hr: Naziv grupe uređaja preklapa se s nazivom uređaja

note: Type: error Description :sl3:
en: The selected volume group name overlaps with an existing device name. Please choose another name.
hr: Odabrani naziv grupe uređaja preklapa se s nazivom postojećeg uređaja. Odaberite drugi naziv.

note: Type: select Description :sl3:
en: Volume group to delete:
hr: Grupa uređaja za brisanje:

note: Type: select Description :sl3:
en: Please select the volume group you wish to delete.
hr: Odaberite grupu uređaja koju želite obrisati.

note: #-#-#-#-#  templates.pot (lvmcfg)  #-#-#-#-# Type: error Description :sl3: #-#-#-#-#  templates.pot (partman-lvm)  #-#-#-#-#
en: No volume group found
hr: Nema pronađene grupe uređaja

note: Type: error Description :sl3:
en: No volume group has been found.
hr: Nema pronađene grupe uređaja.

note: Type: error Description :sl3:
en: The volume group may have already been deleted.
hr: Grupa uređaja je možda već obrisana.

note: Type: boolean Description :sl3:
en: Really delete the volume group?
hr: Stvarno obriši grupu uređaja?

note: Type: boolean Description :sl3:
en: Please confirm the ${VG} volume group removal.
hr: Potvrdite uklanjanje grupe uređaja ${VG}.

note: Type: error Description :sl3:
en: Error while deleting volume group
hr: Greška pri brisanju grupe uređaja

note: Type: error Description :sl3:
en: The selected volume group could not be deleted. One or more logical volumes may currently be in use.
hr: Odabrana grupa uređaja ne može biti obrisana. Jedan ili više logičkih uređaja se možda već koristi.

note: Type: error Description :sl3:
en: No volume group can be deleted.
hr: Nema grupe uređaja za brisanje.

note: Type: select Description :sl3:
en: Volume group to extend:
hr: Grupa uređaja za povećanje:

note: Type: select Description :sl3:
en: Please select the volume group you wish to extend.
hr: Odaberite grupu uređaja koju želite povećati.

note: Type: multiselect Description :sl3:
en: Devices to add to the volume group:
hr: Uređaji za dodavanje grupi uređaja:

note: Type: multiselect Description :sl3:
en: Please select the devices you wish to add to the volume group.
hr: Odaberite uređaje koje želite dodati grupi uređaja.

note: Type: error Description :sl3:
en: No physical volumes were selected. Extension of the volume group was aborted.
hr: Nema odabranih fizičkih uređaja. Povećavanje grupe uređaja je prekinuto.

note: Type: error Description :sl3:
en: Error while extending volume group
hr: Greška pri povećavanju grupe uređaja

note: Type: error Description :sl3:
en: The physical volume ${PARTITION} could not be added to the selected volume group.
hr: Fizički uređaj ${PARTITION} nije moguće dodati odabranoj grupi uređaja.

note: Type: error Description :sl3:
en: No volume group can be reduced.
hr: Nema grupa uređaja za smanjivanje.

note: Type: select Description :sl3:
en: Volume group to reduce:
hr: Grupe uređaja za smanjivanje:

note: Type: select Description :sl3:
en: Please select the volume group you wish to reduce.
hr: Odaberite grupu uređaja koju želite smanjiti.

note: Type: select Description :sl3:
en: Device to remove from volume group:
hr: Uređaji za uklanjanje iz grupe uređaja:

note: Type: select Description :sl3:
en: Please select the device you wish to remove from the volume group.
hr: Odaberite uređaje koje želite ukloniti iz grupe uređaja.

note: #-#-#-#-#  templates.pot (lvmcfg)  #-#-#-#-# Type: error Description :sl3: #-#-#-#-#  templates.pot (partman-lvm)  #-#-#-#-#
en: Error while reducing volume group
hr: Greška pri smanjivanju grupe uređaja

note: Type: error Description :sl3:
en: The selected volume group (${VG}) could not be reduced. There is only one physical volume attached. Please delete the volume group instead.
hr: Odabrana grupa uređaja (${VG}) ne može se smanjiti. Samo je jedan fizički uređaj spojen. Umjesto toga obrišite grupu uređaja.

note: Type: error Description :sl3:
en: The physical volume ${PARTITION} could not be removed from the selected volume group.
hr: Fizički uređaj ${PARTITION} nije moguće dodati odabranoj grupi uređaja.

note: Type: error Description :sl3:
en: No volume groups were found for creating a new logical volume.  Please create more physical volumes and volume groups.
hr: Nema pronađenih slobodnih grupa uređaja za stvaranje novog logičkog uređaja.  Stvorite više fizičkih uređaja i grupa uređaja.

note: Type: error Description :sl3:
en: No free volume groups were found for creating a new logical volume. Please create more physical volumes and volume groups, or reduce an existing volume group.
hr: Nema pronađenih slobodnih grupa uređaja za stvaranje novog logičkog uređaja. Stvorite više fizičkih uređaja i grupa uređaja ili smanjite neku postojeću grupu uređaja.

note: Type: string Description :sl3:
en: Logical volume name:
hr: Naziv logičkog uređaja:

note: Type: string Description :sl3:
en: Please enter the name you would like to use for the new logical volume.
hr: Upišite naziv koji će se koristiti za novi logički uređaj.

note: #-#-#-#-#  templates.pot (lvmcfg)  #-#-#-#-# Type: select Description :sl3: #-#-#-#-#  templates.pot (partman-lvm)  #-#-#-#-#
en: Volume group:
hr: Grupa uređaja:

note: Type: select Description :sl3:
en: Please select the volume group where the new logical volume should be created.
hr: Odaberite grupu uređaja gdje će biti stvoren novi logički uređaj.

note: Type: error Description :sl3:
en: No logical volume name entered
hr: Nema upisanog naziva logičkog uređaja

note: Type: error Description :sl3:
en: No name for the logical volume has been entered.  Please enter a name.
hr: Nema upisanog naziva logičkog uređaja. Upišite naziv.

note: Type: error Description :sl3:
en: Error while creating a new logical volume
hr: Greška pri stvaranju novog logičkog uređaja

note: Type: error Description :sl3:
en: The name ${LV} is already in use by another logical volume on the same volume group (${VG}).
hr: Naziv ${LV} se već koristi za drugi logički uređaj u istoj grupi uređaja (${VG}).

note: Type: string Description :sl3:
en: Logical volume size:
hr: Veličina logičkog uređaja:

note: Type: string Description :sl3:
en: Please enter the size of the new logical volume. The size may be entered in the following formats: 10K (Kilobytes), 10M (Megabytes), 10G (Gigabytes), 10T (Terabytes). The default unit is Megabytes.
hr: Upišite veličinu novog logičkog uređaja. Ona može biti upisana na sljedeće načine: 10K (kilobajta), 10M (megabajta), 10G (gigabajta), 10T (terabajta). Zadana vrijednost su megabajti.

note: Type: error Description :sl3:
en: Unable to create a new logical volume (${LV}) on ${VG} with the new size ${SIZE}.
hr: Nemoguće stvaranje novog logičkog uređaja (${LV}) u grupi ${VG} nove veličine ${SIZE}.

note: Type: error Description :sl3:
en: No volume group has been found for deleting a logical volume.
hr: Nema pronađene grupe uređaja za brisanje logičkog uređaja.

note: Type: select Description :sl3:
en: Please select the volume group which contains the logical volume to be deleted.
hr: Odaberite grupu uređaja koja sadrži logički uređaj za brisanje.

note: Type: error Description :sl3:
en: No logical volume found
hr: Nema logičkog uređaja

note: Type: error Description :sl3:
en: No logical volume has been found.  Please create a logical volume first.
hr: Nije pronađen logički uređaj.  Prvo ga stvorite.

note: Type: select Description :sl3:
en: Logical volume:
hr: Logički uređaj:

note: Type: select Description :sl3:
en: Please select the logical volume to be deleted on ${VG}.
hr: Odaberite logički uređaj za brisanje u ${VG}.

note: Type: error Description :sl3:
en: Error while deleting the logical volume
hr: Greška pri brisanju logičkog uređaja

note: Type: error Description :sl3:
en: The logical volume (${LV}) on ${VG} could not be deleted.
hr: Logički uređaj (${LV}) u grupi ${VG} nije moguće obrisati.

note: Type: error Description :sl3:
en: No usable physical volumes found
hr: Nema upotrebljivih fizičkih uređaja

note: Type: error Description :sl3:
en: No physical volumes (i.e. partitions) were found in your system. All physical volumes may already be in use. You may also need to load some required kernel modules or re-partition the hard drives.
hr: Nema pronađenih fizičkih uređaja (npr. particija) na vašem sustavu. Svi fizički uređaji možda se već koriste. Možda trebate učitati određene potrebne module za kernel ili ponovno particionirati čvrste diskove.

note: Type: error Description :sl3:
en: Logical Volume Manager not available
hr: Upravitelj logičkim uređajima nije dostupan

note: Type: error Description :sl3:
en: The current kernel doesn't support the Logical Volume Manager. You may need to load the lvm-mod module.
hr: Trenutni kernel ne podržava Upravitelja logičkim uređajima. Možda trebate učitati ULU modul (lvm-mod).

note: Type: error Description :sl3:
en: Multidisk (MD) not available
hr: Višediskovlje (VD) je nedostupno

note: Type: error Description :sl3:
en: The current kernel doesn't seem to support multidisk devices. This should be solved by loading the needed modules.
hr: Trenutni kernel ne podržava višediskovne (VD) uređaje. To se može riješiti učitavanjem potrebnih modula.

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) :sl3:
en: Create MD device
hr: Stvori VD uređaj

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) :sl3:
en: Delete MD device
hr: Obriši VD uređaj

note: #-#-#-#-#  templates.pot (mdcfg)  #-#-#-#-# Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) :sl3: #-#-#-#-#  templates.pot (partman-crypto)  #-#-#-#-# #-#-#-#-#  templates.pot (partm
en: Finish
hr: Završi

note: Type: select Description :sl3:
en: Multidisk configuration actions
hr: Radnje podešavanja višediskovlja

note: Type: select Description :sl3:
en: This is the Multidisk (MD) and software RAID configuration menu.
hr: Ovo je izbornik za podešavanje višediskovnog (VD) i softverskog RAID-a.

note: Type: select Description :sl3:
en: Please select one of the proposed actions to configure multidisk devices.
hr: Odaberite jednu od ponuđenih radnji za podešavanje višediskovnih uređaja.

note: Type: error Description :sl3:
en: No RAID partitions available
hr: Nema dostupnih RAID particija

note: Type: error Description :sl3:
en: No unused partitions of the type "Linux RAID Autodetect" are available. Please create such a partition, or delete an already used multidisk device to free its partitions.
hr: Nema dostupnih nekorištenih particija vrste "Linux RAID Autodetect". Stvorite takvu particiju, ili obrišite već korišteni višediskovni uređaj kako bi oslobodili njegove particije.

note: Type: error Description :sl3:
en: If you have such partitions, they might contain actual file systems, and are therefore not available for use by this configuration utility.
hr: Ako imate takve particije, one možda sadrže stvarne datotečne sustave i kao takve nisu raspoložive za korištenje na ovom alatu podešavanja.

note: Type: error Description :sl3:
en: Not enough RAID partitions available
hr: Nema dovoljno raspoloživih RAID particija

note: Type: error Description :sl3:
en: There are not enough RAID partitions available for your selected configuration.  You have ${NUM_PART} RAID partitions available but your configuration requires ${REQUIRED} partitions.
hr: Nema dovoljno raspoloživih RAID particija za vaša odabrana podešavanja. Imate raspoloživih ${NUM_PART} RAID particija, ali vaše podešavanje zahtijeva ${REQUIRED} RAID particija.

note: Type: select Description :sl3:
en: Multidisk device type:
hr: Vrsta višediskovnog uređaja:

note: Type: select Description :sl3:
en: Please choose the type of the multidisk device to be created.
hr: Odaberite vrstu višediskovnog uređaja koji će biti stvoren.

note: Type: multiselect Description :sl3:
en: Active devices for the RAID0 multidisk device:
hr: Aktivni uređaji za RAID0 višediskovni uređaj:

note: Type: multiselect Description :sl3:
en: You have chosen to create a RAID0 array. Please choose the active devices in this array.
hr: Odabrali ste stvaranje RAID0 polja. Odaberite aktivne uređaje u tome polju.

note: Type: string Description :sl3:
en: Number of active devices for the RAID${LEVEL} array:
hr: Broj aktivnih uređaja za RAID${LEVEL} polje:

note: Type: string Description :sl3:
en: The RAID${LEVEL} array will consist of both active and spare partitions. The active partitions are those used, while the spare devices will only be used if one or more of the active devices fail. A minimum of ${MINIMUM} active devices is required.
hr: RAID${LEVEL} polje sadržavati će obje i aktivne i pričuvne particije. Aktivne će se particije koristiti, dok će se pričuvni uređaji koristiti samo ako jedan ili više aktivnih uređaja zataji. Potrebno je imati najmanje ${MINIMUM} aktivna uređaja.

note: Type: string Description :sl3:
en: NOTE: this setting cannot be changed later.
hr: NAPOMENA: ove postavke se ne mogu promijeniti kasnije.

note: Type: multiselect Description :sl3:
en: Active devices for the RAID${LEVEL} multidisk device:
hr: Aktivni uređaji za RAID${LEVEL} višediskovni uređaj:

note: Type: multiselect Description :sl3:
en: You have chosen to create a RAID${LEVEL} array with ${COUNT} active devices.
hr: Odabrali ste stvaranje RAID${LEVEL} polja sa ${COUNT} aktivnih uređaja.

note: Type: multiselect Description :sl3:
en: Please choose which partitions are active devices. You must select exactly ${COUNT} partitions.
hr: Odaberite koje particije su aktivni uređaji. Morate odabrati točno ${COUNT} particija.

note: Type: string Description :sl3:
en: Number of spare devices for the RAID${LEVEL} array:
hr: Broj pričuvnih uređaja za RAID${LEVEL} polje:

note: Type: multiselect Description :sl3:
en: Spare devices for the RAID${LEVEL} multidisk device:
hr: Pričuvni uređaji za RAID${LEVEL} višediskovni uređaj:

note: Type: multiselect Description :sl3:
en: You have chosen to create a RAID${LEVEL} array with ${COUNT} spare devices.
hr: Odabrali ste stvaranje RAID${LEVEL} polja sa ${COUNT} pričuvnih uređaja.

note: Type: multiselect Description :sl3:
en: Please choose which partitions will be used as spare devices. You may choose up to ${COUNT} partitions. If you choose less than ${COUNT} devices, the remaining partitions will be added to the array as "missing". You will be able to add them later to the array.
hr: Odaberite koje će se particije koristiti kao pričuvne. Možete odabrati do ${COUNT} particija. Ako odaberete manje od ${COUNT} uređaja, preostale particije će biti dodane polju kao "nedostaje". Kasnije ćete i njih moći dodati polju.

note: Type: string Description :sl3:
en: Layout of the RAID10 multidisk device:
hr: Raspored RAID10 višediskovnih uređaja:

note: Type: string Description :sl3:
en: The layout must be n, o, or f (arrangement of the copies) followed by a number (number of copies of each chunk). The number must be smaller or equal to the number of active devices.
hr: Raspored mora biti n, o, ili f (poredak kopija) zatim treba ići broj (broj kopija svakog komada). Broj mora biti manji ili jednak broju aktivnih uređaja.

note: Type: string Description :sl3:
en: The letter is the arrangement of the copies:
     n - near copies: Multiple copies of one data block are at similar
         offsets in different devices.
     f - far copies: Multiple copies have very different offsets
     o - offset copies: Rather than the chunks being duplicated within a
         stripe, whole stripes are duplicated but are rotated by one
         device so duplicate blocks are on different devices.
hr: Slovo opisuje poredak kopija:
     n - bliske kopije: Višestruke kopije jednog bloka podataka su na sličnim
         mjestima na različitim uređajima.
     f - udaljene kopije: Višestruke kopije su na sasvim različitim mjestima
     o - offset kopije: Umjesto da se komadi podataka udvostručuju unutar trake,
         cijele trake se udvostručuju ali se rotiraju za jedan uređaj, tako da
         dupli blokovi stoje na različitim uređajima.

note: Type: select Description :sl3:
en: Multidisk device to be deleted:
hr: Višediskovni uređaj za brisanje:

note: Type: select Description :sl3:
en: Deleting a multidisk device will stop it and clear the superblock of all its components.
hr: Brisanje višediskovnog uređaja zaustavit će ga i obrisati superblokove svih njegovih komponenti.

note: Type: select Description :sl3:
en: Please note this will not immediately allow you to reuse the partitions or devices in a new multidisk device. The array will however be unusable after the deletion.
hr: Uzmite u obzir da vam to neće omogućiti trenutno korištenje particije ili uređaja u novom višediskovnom uređaju. Polje će biti neupotrebljivo nakon brisanja.

note: Type: select Description :sl3:
en: If you select a device for deletion, you will get some information about it and you will be given the option of aborting this operation.
hr: Ako odaberete uređaj za brisanje, dobit ćete neke obavijesti o tome i mogućnost prekidanja tog postupka.

note: Type: error Description :sl3:
en: No multidisk devices available
hr: Nema raspoloživih višediskovnih uređaja

note: Type: error Description :sl3:
en: No multidisk devices are available for deletion.
hr: Nema raspoloživih višediskovnih uređaja za brisanje.

note: Type: boolean Description :sl3:
en: Really delete this multidisk device?
hr: Stvarno želite obrisati ovaj višediskovni uređaj?

note: Type: boolean Description :sl3:
en: Please confirm whether you really want to delete the following multidisk device:
hr: Potvrdite želite li stvarno obrisati sljedeći višediskovni uređaj:

note: Type: boolean Description :sl3:
en:  Device:            ${DEVICE}
     Type:              ${TYPE}
     Component devices:
hr:  Uređaj:            ${DEVICE}
     Vrsta:             ${TYPE}
     Sadrži uređaje:

note: Type: error Description :sl3:
en: Failed to delete the multidisk device
hr: Neuspjelo brisanje višediskovnog uređaja

note: Type: error Description :sl3:
en: There was an error deleting the multidisk device. It may be in use.
hr: Dogodila se greška pri brisanju višediskovnog uređaja. Možda je se koristi.

note: Type: string Description :sl3:
en: Waiting time (in seconds) for link detection:
hr: Vrijeme čekanja (u sekundama) za otkrivanje povezivanja:

note: Type: string Description :sl3:
en: Please enter the maximum time you would like to wait for network link detection.
hr: Unesite najveće vrijeme čekanja za otkrivanje mrežnog povezivanja.

note: Type: error Description :sl3:
en: Invalid network link detection waiting time
hr: Neispravno vrijeme čekanja otkrivanja mrežnog povezivanja

note: Type: error Description :sl3:
en: The value you have provided is not valid. The maximum waiting time (in seconds) for network link detection must be a positive integer.
hr: Vrijednost koju ste unijeli nije ispravna. Najveće vrijeme čekanja (u sekundama) za otkrivanje mrežnog povezivanja mora biti pozitivan cijeli broj.

note: Type: error Description IPv6 :sl3:
en: IPv6 unsupported on point-to-point links
hr: IPv6 nije podržan u točka-u-točka povezivanjima

note: Type: error Description IPv6 :sl3:
en: IPv6 addresses cannot be configured on point-to-point links.  Please use an IPv4 address, or go back and select a different network interface.
hr: IPv6 adrese ne mogu biti podešene na točka-u-točka povezivanjima.  Koristite IPv4 adrese ili se vratite natrag i odaberite drugačije mrežno sučelje.

note: Type: text Description :sl3:
en: Continue installation remotely using SSH
hr: Nastavi instalaciju udaljeno korištenjem SSH-a

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) :sl3:
en: Start installer
hr: Pokrenite instalaciju

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) :sl3:
en: Start installer (expert mode)
hr: Pokreni instalaciju (napredni način)

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) :sl3:
en: Start shell
hr: Pokreni ljusku

note: Type: select Description :sl3:
en: Network console option:
hr: Mogućnosti mrežne konzole:

note: Type: select Description :sl3:
en: This is the network console for the Debian installer. From here, you may start the Debian installer, or execute an interactive shell.
hr: Ovo je mrežna konzola Debianovog instalacijskog programa. Odavde možete pokrenuti Debianov instalacijski program ili pokrenuti interaktivnu ljusku.

note: Type: select Description :sl3:
en: To return to this menu, you will need to log in again.
hr: Za povratak u ovaj izbornik morat ćete se ponovno prijaviti.

note: Type: text Description :sl3:
en: Generating SSH host key
hr: Stvaranje ključa SSH poslužitelja

note: Type: password Description :sl3:
en: Remote installation password:
hr: Lozinka udaljene instalacije:

note: Type: password Description :sl3:
en: You need to set a password for remote access to the Debian installer. A malicious or unqualified user with access to the installer can have disastrous results, so you should take care to choose a password that is not easy to guess. It should not be a word found in the dictionary, or a word that could be easily associated with you, like your middle name.
hr: Morate postaviti lozinku za udaljeni pristup Debianovom instalacijskom programu. Zlonamjeran ili nestručan korisnik s pristupom instalacijskom programu može prouzrokovati katastrofalnu štetu, stoga bi trebali odabrati lozinku koju nije lako pogoditi. To ne bi trebala biti riječ pronađena u rječniku ili riječ koja bi se lako mogla povezati s vama, poput vašeg srednjeg imena.

note: Type: password Description :sl3:
en: This password is used only by the Debian installer, and will be discarded once you finish the installation.
hr: Ova lozinka se koristi samo u Debianovom instalacijskom programu i biti će odbačena jednom kada završite instalaciju.

note: Type: password Description :sl3:
en: Please enter the same remote installation password again to verify that you have typed it correctly.
hr: Upišite istu lozinku udaljene instalacije ponovno kao potvrdu da ste ju ispravno utipkali.

note: Type: error Description :sl3:
en: Password mismatch
hr: Lozinka se ne podudara

note: Type: error Description :sl3:
en: The two passwords you entered were not the same. Please enter a password again.
hr: Lozinke koje ste upisali nisu jednake. Upišite lozinku ponovno.

note: Type: note Description :sl3:
en: Start SSH
hr: Pokreni SSH

note: Type: note Description :sl3:
en: To continue the installation, please use an SSH client to connect to the IP address ${ips} and log in as the "installer" user. For example:
hr: Za nastavak instalacije, koristite SSH klijent za povezivanje na IP adresu ${ips} i prijavite se kao korisnik "installer". Na primjer:

note: Type: note Description :sl3:
en: The fingerprint of this SSH server's host key is: ${fingerprint}
hr: Otisak ključa SSH poslužitelja je: ${fingerprint}

note: Type: note Description :sl3:
en: Please check this carefully against the fingerprint reported by your SSH client.
hr: Provjerite ovo pozorno s otiskom prijavljenim od strane vašeg SSH klijenta.

note: Type: error Description :sl3:
en: Could not fetch SSH authorized keys
hr: Nemoguće preuzimanje SSH ovlaštenih ključeva

note: Type: error Description :sl3: Translators: do NOT translate the "LOCATION" variable name
en: An error occurred while fetching SSH authorized keys from ${LOCATION}.
hr: Dogodila se greška pri preuzimanju SSH ovlaštenih ključeva sa ${LOCATION}.

note: Type: note Description :sl3:
en: No boot loader installed
hr: Učitač pokretanja nije instaliran

note: Type: note Description :sl3:
en: No boot loader has been installed, either because you chose not to or because your specific architecture doesn't support a boot loader yet.
hr: Učitač pokretanja nije instaliran, ili zato što ste tako odabrali, ili zato što vaša određena arhitektura još ne podržava učitača pokretanja.

note: Type: note Description :sl3:
en: You will need to boot manually with the ${KERNEL} kernel on partition ${BOOT} and ${ROOT} passed as a kernel argument.
hr: Morat ćete ručno pokrenuti sustav s kernelom ${KERNEL} na particiji ${BOOT}, te argumentom ${ROOT} proslijeđenim kernelu.

note: Type: text Description :sl3: TRANSLATORS: This is a menu entry. Keep in under 55 columns/characters
en: Guided - use entire disk and set up encrypted LVM
hr: Navođeno - cijeli disk, uz šifrirani ULU

note: Type: string Description :sl3:
en: Name of the volume group for the new system:
hr: Naziv grupe uređaja za novi sustav:

note: Type: error Description :sl3:
en: This happened because the selected recipe does not contain any partition that can be created on LVM volumes.
hr: To se dogodilo zato što odabrano pravilo ne sadrži nijednu particiju koja se može stvoriti na ULU uređajima.

note: Type: boolean Description :sl3:
en: Continue installation without /boot partition?
hr: Nastavi s instalacijom bez /boot particije?

note: Type: boolean Description :sl3:
en: The recipe you selected does not contain a separate partition for /boot. This is normally needed to allow you to boot the system when using LVM.
hr: Sadržaj koji ste odabrali ne sadrži zasebnu /boot particiju. Ovo je uobičajeno potrebno kako bi mogli pokrenuti sustav dok se koristi ULU.

note: Type: boolean Description :sl3:
en: You can choose to ignore this warning, but that may result in a failure to reboot the system after the installation is completed.
hr: Možete zanemariti ovo upozorenje, ali to bi moglo uzrokovati neuspjelo ponovno pokretanje sustava nakon završetka instalacije.

note: Type: error Description :sl3:
en: The volume group name used to automatically partition using LVM is already in use. Lowering the priority for configuration questions will allow you to specify an alternative name.
hr: Naziv grupe uređaja koji je korišten pri automatskom particioniranju ULU-a se već koristi. Smanjivanje prioriteta za pitanja podešavanja će vam omogućiti određivanje nekog drugog naziva.

note: Type: error Description :sl3:
en: Unexpected error while creating volume group
hr: Neočekivana greška pri stvaranju grupe uređaja

note: Type: error Description :sl3:
en: Autopartitioning using LVM failed because an error occurred while creating the volume group.
hr: Automatsko particioniranje koristeći ULU nije uspjelo zbog greške pri stvaranju grupe uređaja.

note: Type: text Description :sl3:
en: Multiple disks (%s)
hr: Višestruki diskovi (%s)

note: Type: error Description :sl3:
en: Non-existing physical volume
hr: Nepostojeći fizički uređaj

note: Type: error Description :sl3:
en: A volume group definition contains a reference to a non-existing physical volume.
hr: Definicija grupe uređaja sadrži poveznicu na nepostojeći fizički uređaj.

note: Type: error Description :sl3:
en: Please check that all devices are properly connected. Alternatively, please check the automatic partitioning recipe.
hr: Provjerite jesu li svi uređaji ispravno povezani. Alternativno, provjerite sadržaj automatskog particioniranja.

note: Type: error Description :sl3:
en: No physical volume defined in volume group
hr: Nema određenih fizičkih uređaja u grupi uređaja

note: Type: error Description :sl3:
en: The automatic partitioning recipe contains the definition of a volume group that does not contain any physical volume.
hr: Sadržaj automatskog particioniranja sadrži definiciju grupe uređaja koja ne sadrži nijedan fizički uređaj.

note: Type: error Description :sl3:
en: Please check the automatic partitioning recipe.
hr: Provjerite sadržaj automatskog particioniranja.

note: Type: string Description :sl3:
en: Amount of volume group to use for guided partitioning:
hr: Veličina grupe uređaja koja će se koristiti za navođeno particioniranje:

note: Type: string Description :sl3:
en: You may use the whole volume group for guided partitioning, or part of it. If you use only part of it, or if you add more disks later, then you will be able to grow logical volumes later using the LVM tools, so using a smaller part of the volume group at installation time may offer more flexibility.
hr: Za navođeno particioniranje možete koristiti cijelu grupu uređaja ili samo dio nje. Ako koristite samo dio iste ili ako kasnije dodate nove diskove, tada ćete moći povećati logičke uređaje koristeći ULU alate. Stoga, korištenje manjeg dijela grupe uređaja prilikom instalacije može ponuditi veću fleksibilnost.

note: Type: string Description :sl3:
en: The minimum size of the selected partitioning recipe is ${MINSIZE} (or ${PERCENT}); please note that the packages you choose to install may require more space than this. The maximum available size is ${MAXSIZE}.
hr: Najmanja veličina odabranog pravila particioniranja je ${MINSIZE} (ili ${PERCENT}); uzmite u obzir da će paketima koje ste odabrali za instalaciju možda trebati više prostora no što postoji sada. Najveća dostupna veličina je ${MAXSIZE}.

note: Type: error Description :sl3:
en: Invalid input
hr: Neispravan upis

note: Type: error Description :sl3:
en: You entered "${INPUT}", which was not recognized as a valid size.
hr: Upisali ste "${INPUT}", što nije prepoznato kao valjana veličina.

note: Type: error Description :sl3:
en: ${SIZE} is too big
hr: ${SIZE} je preveliko

note: Type: error Description :sl3:
en: You asked for ${SIZE} to be used for guided partitioning, but the available space is only ${MAXSIZE}.
hr: Zatražili ste da se za navođeno particioniranje iskoristi ${SIZE}, ali dostupan prostor iznosi samo ${MAXSIZE}.

note: Type: error Description :sl3:
en: ${SIZE} is too small
hr: ${SIZE} je premalo

note: Type: error Description :sl3:
en: You asked for ${SIZE} to be used for guided partitioning, but the selected partitioning recipe requires at least ${MINSIZE}.
hr: Zatražili ste da se ${SIZE} koristi za navođeno particioniranje, ali odabrano pravilo particioniranja zahtijeva barem ${MINSIZE}.

note: Type: error Description :sl3:
en: Error while setting up RAID
hr: Greška pri postavljanju RAID-a

note: Type: error Description :sl3:
en: An unexpected error occurred while setting up a preseeded RAID configuration.
hr: Neočekivana greška se dogodila pri postavljanju predloženog RAID podešavanja.

note: Type: error Description :sl3:
en: Not enough RAID partitions specified
hr: Nema dovoljno određenih RAID particija

note: Type: error Description :sl3:
en: There are not enough RAID partitions specified for your preseeded configuration. You need at least 3 devices for a RAID5 array.
hr: Nema dovoljno određenih RAID particija za vaše predloženo podešavanje. Potrebna su vam najmanje 3 uređaja za RAID5 polje.

note: Type: text Description For example MMC/SD card #1 (mmcblk0) :sl3:
en: MMC/SD card #%s (%s)
hr: MMC/SD kartica br. %s (%s)

note: Type: text Description For example MMC/SD card #1, partition #2 (mmcblk0p2) :sl3:
en: MMC/SD card #%s, partition #%s (%s)
hr: MMC/SD kartica br. %s, particija br. %s (%s)

note: Type: text Description :sl3:
en: RAID%s device #%s
hr: RAID%s uređaj br. %s

note: Type: text Description :sl3:
en: Encrypted volume (%s)
hr: Šifrirani uređaj (%s)

note: Type: text Description Translators: "multipath" is a pretty tricky term to translate You'll find some documentation about it at http://www.redhat.com/docs/manuals/csgfs/browse/4.6/DM_Multipath/index.html "Short" definition: Device Mapper Multipathing (DM-Multipath) allows you to configure multiple I
en: Multipath %s (WWID %s)
hr: Višestruka putanja %s (WWID %s)

note: Type: text Description :sl3:
en: Multipath %s (partition #%s)
hr: Višestruka putanja %s (particija br. %s)

note: Type: text Description :sl3:
en: LVM VG %s, LV %s
hr: ULU GU %s, LU %s

note: Type: text Description :sl3:
en: Loopback (loop%s)
hr: Neuspjelo (loop%s)

note: Type: text Description File system name Keep translations short enough :sl3:
en: physical volume for encryption
hr: fizički uređaj za šifriranje

note: Type: text Description This is related to "encryption method" Encryption type for a file system Translations should be kept below 40 columns :sl3:
en: Device-mapper (dm-crypt)
hr: Maper-uređaja (dm-crypt)

note: Type: text Description This is related to "encryption method" Encryption type for a file system :sl3:
en: not active
hr: nije aktivno

note: Type: text Description Should be kept below 24 columns :sl3:
en: Encryption method:
hr: Način šifriranja:

note: Type: select Description :sl3:
en: Encryption method for this partition:
hr: Način šifriranja za ovu particiju:

note: Type: select Description :sl3:
en: Changing the encryption method will set other encryption-related fields to their default values for the new encryption method.
hr: Promjena načina šifriranja će postaviti ostala polja povezana uz šifriranje na vrijednosti koje su zadane za novi način šifriranja.

note: Type: text Description Should be kept below 24 columns :sl3:
en: Encryption:
hr: Šifriranje:

note: Type: select Description :sl3:
en: Encryption for this partition:
hr: Šifriranje za ovu particiju:

note: Type: text Description Should be kept below 24 columns :sl3:
en: Key size:
hr: Veličina ključa:

note: Type: select Description :sl3:
en: Key size for this partition:
hr: Veličina ključa za ovu particiju:

note: Type: text Description An initialization vector is the initial value used to seed the encryption algorithm Should be kept below 24 columns :sl3:
en: IV algorithm:
hr: IV algoritam:

note: Type: select Description An initialization vector is the initial randomness used to seed the encryption algorithm :sl3:
en: Initialization vector generation algorithm for this partition:
hr: Pokretanje vektorski generiranog algoritma za ovu particiju:

note: Type: select Description An initialization vector is the initial randomness used to seed the encryption algorithm :sl3:
en: Different algorithms exist to derive the initialization vector for each sector. This choice influences the encryption security. Normally, there is no reason to change this from the recommended default, except for compatibility with older systems.
hr: Postoje razni algoritmi kojima se određuje vektor pokretanja za svaki sektor. Ovaj odabir utječe na sigurnost šifriranja. Uobičajeno nema razloga za promjenom preporučene zadane vrijednosti, osim zbog kompatibilnosti sa starijim sustavima.

note: Type: text Description Should be kept below 24 columns :sl3:
en: Encryption key:
hr: Ključ šifriranja:

note: Type: select Description :sl3:
en: Type of encryption key for this partition:
hr: Vrsta ključa šifriranja za ovu particiju:

note: Type: text Description Should be kept below 24 columns :sl3:
en: Encryption key hash:
hr: Suma ključa šifriranja:

note: Type: select Description :sl3:
en: Type of encryption key hash for this partition:
hr: Vrsta sume provjere ključa šifriranja za ovu particiju:

note: Type: select Description :sl3:
en: The encryption key is derived from the passphrase by applying a one-way hash function to it. Normally, there is no reason to change this from the recommended default and doing so in the wrong way can reduce the encryption strength.
hr: Ključ šifriranja je izveden iz lozinke primjenjivanjem jednosmjerne funkcije sume provjere. Uobičajeno nema razloga za promjenu preporučene zadane vrijednosti, dok promjena na pogrešan način može smanjiti snagu šifriranja.

note: Type: text Description This shows up in a screen summarizing options and will be followed by "yes" or "no" :sl3:
en: Erase data:
hr: Obriši podatke:

note: Type: text Description :sl3:
en: Erase data on this partition
hr: Obriši podatke na ovoj particiji

note: Type: boolean Description :sl3:
en: Really erase the data on ${DEVICE}?
hr: Stvarno obriši podatke na ${DEVICE}?

note: Type: boolean Description :sl3:
en: The data on ${DEVICE} will be overwritten with zeroes. It can no longer be recovered after this step has completed. This is the last opportunity to abort the erase.
hr: Podaci na ${DEVICE} će biti prebrisani nulama. Neće se više moći vratiti nakon što završi ovaj postupak. Ovo je zadnja prilika za odustajanje od brisanja.

note: Type: text Description :sl3:
en: Erasing data on ${DEVICE}
hr: Brišem podatke na ${DEVICE}

note: Type: text Description :sl3:
en: The installer is now overwriting ${DEVICE} with zeroes to delete its previous contents. This step may be skipped by cancelling this action.
hr: Instalacijski program sada prebrisuje ${DEVICE} sa nulama kako bi obrisao prijašnji sadržaj. Ovaj korak se može preskočiti prekidanjem ove radnje.

note: Type: error Description :sl3:
en: Erasing data on ${DEVICE} failed
hr: Brisanje podataka na ${DEVICE} nije uspjelo

note: Type: error Description :sl3:
en: An error occurred while trying to overwrite the data on ${DEVICE} with zeroes. The data has not been erased.
hr: Dogodila se greška pri pokušaju prebrisavanja podataka na ${DEVICE} sa nulama. Podaci nisu obrisani.

note: Type: boolean Description :sl3:
en: The data on ${DEVICE} will be overwritten with random data. It can no longer be recovered after this step has completed. This is the last opportunity to abort the erase.
hr: Podaci na ${DEVICE} će biti prebrisani naizmjenično generiranim podacima. Neće se više moći vratiti nakon što završi ovaj postupak. Ovo je zadnja prilika za odustajanje od brisanja.

note: Type: text Description :sl3:
en: The installer is now overwriting ${DEVICE} with random data to prevent meta-information leaks from the encrypted volume. This step may be skipped by cancelling this action, albeit at the expense of a slight reduction of the quality of the encryption.
hr: Instalacijski program sada prebrisuje ${DEVICE} s naizmjenično generiranim podacima kako bi spriječio curenje meta-informacija sa šifriranih uređaja. Ovaj korak se može preskočiti prekidanjem ove radnje, ali na štetu blagog smanjenja kvalitete šifriranja.

note: Type: error Description :sl3:
en: An error occurred while trying to overwrite ${DEVICE} with random data. Recovery of the device's previous contents is possible and meta-information of its new contents may be leaked.
hr: Dogodila se greška pri pokušaju prebrisavanja podataka na ${DEVICE} sa slučajno generiranim podacima. Obnova prijašnjeg sadržaja uređaja je moguća, a meta-informacija njegovog novog sadržaja možda mogu procurjeti.

note: Type: text Description :sl3:
en: Setting up encryption...
hr: Postavljanje šifriranja...

note: Type: text Description :sl3:
en: Configure encrypted volumes
hr: Podesi šifrirane uređaje

note: Type: note Description :sl3:
en: No partitions to encrypt
hr: Nema particija za šifriranje

note: Type: note Description :sl3:
en: No partitions have been selected for encryption.
hr: Nema odabranih particija za šifriranje.

note: Type: note Description :sl3:
en: Required programs missing
hr: Nedostaju potrebni programi

note: Type: note Description :sl3:
en: This build of debian-installer does not include one or more programs that are required for partman-crypto to function correctly.
hr: Ovo izdanje debian instalacijskog programa (debian-installera) ne sadrži jedan ili više programa koji su potrebni da bi partman-crypto ispravno radio.

note: Type: error Description :sl3:
en: Required encryption options missing
hr: Potrebne mogućnosti šifriranja nedostaju

note: Type: error Description :sl3:
en: The encryption options for ${DEVICE} are incomplete. Please return to the partition menu and select all required options.
hr: Mogućnosti šifriranja za ${DEVICE} su nepotpune. Vratite se na izbornik particija i odaberite sve potrebne mogućnosti.

note: Type: text Description :sl3: Translators: this string is used to assemble a string of the format "$specify_option: $missing". If this proves to be a problem in your language, please contact the maintainer and we can do it differently.
en: missing
hr: nedostaje

note: Type: text Description :sl3: What is "in use" is a partition
en: In use as physical volume for encrypted volume ${DEV}
hr: Koristi se kao fizički uređaj za šifrirani uređaj ${DEV}

note: Type: error Description :sl3:
en: Encryption package installation failure
hr: Instalacija paketa šifriranja nije uspjela

note: Type: error Description :sl3:
en: The kernel module package ${PACKAGE} could not be found or an error occurred during its installation.
hr: Paket s kernel modulima ${PACKAGE} nije pronađen ili se dogodila greška pri njegovoj instalaciji.

note: Type: error Description :sl3:
en: It is likely that there will be problems setting up encrypted partitions when the system is rebooted. You may be able to correct this by installing the required package(s) later on.
hr: Vjerojatno će biti problema pri postavljanju šifriranih particija nakon što se sustav ponovo pokrene. To ćete moći ispraviti naknadnom instalacijom potrebnih paketa.

note: Type: boolean Description :sl3:
en: Write the changes to disk and configure encrypted volumes?
hr: Zapiši promjene na disk i podesi šifrirane uređaje?

note: Type: boolean Description :sl3:
en: Before encrypted volumes can be configured, the current partitioning scheme has to be written to disk.  These changes cannot be undone.
hr: Prije nego što se šifrirani uređaji mogu podesiti, trenutna shema particioniranja mora biti zapisana na disk.  Te promjene se ne mogu poništiti.

note: Type: boolean Description :sl3:
en: After the encrypted volumes have been configured, no additional changes to the partitions on the disks containing encrypted volumes are allowed. Please decide if you are satisfied with the current partitioning scheme for these disks before continuing.
hr: Nakon što su šifrirani uređaji podešeni, više neće biti moguće dodatne promjene particija na diskovima koji sadrže šifrirane uređaje. Odlučite jeste li zadovoljni trenutnom shemom particioniranja na tim diskovima prije nego što nastavite.

note: Type: boolean Description :sl3:
en: Keep current partition layout and configure encrypted volumes?
hr: Zadrži trenutni raspored particija i podesi šifrirane uređaje?

note: Type: error Description :sl3:
en: Configuration of encrypted volumes failed
hr: Podešavanje šifriranih uređaja nije uspjelo

note: Type: error Description :sl3:
en: An error occurred while configuring encrypted volumes.
hr: Pojavila se greška pri podešavanju šifriranih uređaja.

note: Type: error Description :sl3:
en: The configuration has been aborted.
hr: Podešavanje je prekinuto.

note: Type: error Description :sl3:
en: Initialisation of encrypted volume failed
hr: Pokretanje šifriranih uređaja nije uspjelo

note: Type: error Description :sl3:
en: An error occurred while setting up encrypted volumes.
hr: Pojavila se greška pri podešavanju šifriranih uređaja.

note: Type: text Description :sl3: This is a key type for encrypted file systems It can be either protected by a passphrase, a keyfile of a random key This text is one of these choices, so keep it short
en: Passphrase
hr: Lozinka

note: Type: text Description :sl3: This is a key type for encrypted file systems It can be either protected by a passphrase, a keyfile of a random key This text is one of these choices, so keep it short
en: Keyfile (GnuPG)
hr: Datoteka ključa (GnuPG)

note: Type: text Description :sl3: This is a key type for encrypted file systems It can be either protected by a passphrase, a keyfile of a random key This text is one of these choices, so keep it short
en: Random key
hr: Naizmjeničan ključ

note: Type: error Description :sl3:
en: Unsafe swap space detected
hr: Pronađen je nesiguran swap prostor

note: Type: error Description :sl3:
en: An unsafe swap space has been detected.
hr: Pronađen je nesiguran swap prostor.

note: Type: error Description :sl3:
en: This is a fatal error since sensitive data could be written out to disk unencrypted. This would allow someone with access to the disk to recover parts of the encryption key or passphrase.
hr: Ovo je kobna greška zbog toga što se osjetljivi podaci mogu zapisati na disk bez šifriranja. To može omogućiti nekome s pristupom disku da oporavi dijelove ključa šifriranja ili lozinke.

note: Type: error Description :sl3:
en: Please disable the swap space (e.g. by running swapoff) or configure an encrypted swap space and then run setup of encrypted volumes again. This program will now abort.
hr: Onemogućite swap prostor (npr. pokretanjem naredbe 'swapoff') ili podesite šifrirani swap prostor i zatim ponovno pokrenite podešavanje šifriranih uređaja. Ovaj program će se sada prekinuti.

note: Type: password Description :sl3:
en: Encryption passphrase:
hr: Lozinka šifriranja:

note: Type: password Description :sl3:
en: You need to choose a passphrase to encrypt ${DEVICE}.
hr: Morate odabrati lozinku za šifriranje ${DEVICE}.

note: Type: password Description :sl3:
en: The overall strength of the encryption depends strongly on this passphrase, so you should take care to choose a passphrase that is not easy to guess. It should not be a word or sentence found in dictionaries, or a phrase that could be easily associated with you.
hr: Sveukupna snaga šifriranja ovisi jako o ovoj lozinki, stoga biste trebali odabrati lozinku koju nije lako pogoditi. To ne bi smjela biti riječ ili rečenica koja se nalazi u rječnicima, niti fraza koja bi se lako moglo povezati s vama.

note: Type: password Description :sl3:
en: A good passphrase will contain a mixture of letters, numbers and punctuation. Passphrases are recommended to have a length of 20 or more characters.
hr: Dobra lozinka treba sadržavati mješavinu slova, brojeve i znakova. Preporučljiva duljina lozinke je 20 ili više znakova.

note: Type: password Description :sl3:
en: Re-enter passphrase to verify:
hr: Ponovo upišite lozinku za provjeru:

note: Type: password Description :sl3:
en: Please enter the same passphrase again to verify that you have typed it correctly.
hr: Upišite ponovno istu lozinku za potvrdu da ste ju pravilno utipkali.

note: Type: error Description :sl3:
en: Passphrase input error
hr: Greška upisa lozinke

note: Type: error Description :sl3:
en: The two passphrases you entered were not the same. Please try again.
hr: Lozinke koje ste upisali nisu jednake. Pokušajte ponovno.

note: Type: error Description :sl3:
en: Empty passphrase
hr: Prazna lozinka

note: Type: error Description :sl3:
en: You entered an empty passphrase, which is not allowed. Please choose a non-empty passphrase.
hr: Upisali ste praznu lozinku, što nije dopušteno. Odaberite lozinku koja nije prazna.

note: Type: boolean Description :sl3:
en: Use weak passphrase?
hr: Koristi slabu lozinku?

note: Type: boolean Description :sl3: Translators: we unfortunately cannot use plural forms here So, you are suggested to use the plural form adapted for MINIMUM=8, which is the current hardcoded value
en: You entered a passphrase that consists of less than ${MINIMUM} characters, which is considered too weak. You should choose a stronger passphrase.
hr: Upisali ste lozinku koja sadrži manje od ${MINIMUM} znaka, što se smatra preslabim. Trebali biste odabrati jaču lozinku.

note: Type: entropy Description :sl3:
en: The encryption key for ${DEVICE} is now being created.
hr: Ključ šifriranja za ${DEVICE} je upravo stvoren.

note: Type: error Description :sl3:
en: Keyfile creation failure
hr: Neuspjelo stvaranje datoteke ključa

note: Type: error Description :sl3:
en: An error occurred while creating the keyfile.
hr: Dogodila se greška pri stvaranju datoteke ključa.

note: Type: error Description :sl3:
en: Encryption configuration failure
hr: Neuspjelo podešavanje šifriranja

note: Type: error Description :sl3:
en: You have selected the /boot file system to be stored on an encrypted partition. This is not possible because the boot loader would be unable to load the kernel and initrd. Continuing now would result in an installation that cannot be used.
hr: Odabrali ste pohranu /boot datotečnog sustava na šifriranu particiju. To nije moguće zato jer učitač pokretanja ne bi mogao učitati kernel i initrd. Nastavak može rezultirati neupotrebljivom instalacijom.

note: Type: error Description :sl3:
en: You should go back and choose a non-encrypted partition for the /boot file system.
hr: Trebali bi se vratiti i odabrati nešifriranu particiju za /boot datotečni sustav.

note: Type: boolean Description :sl3:
en: Are you sure you want to use a random key?
hr: Sigurno želite koristiti naizmjenično odabrani ključ?

note: Type: boolean Description :sl3:
en: You have chosen a random key type for ${DEVICE} but requested the partitioner to create a file system on it.
hr: Odabrali ste naizmjenično odabranu vrstu ključa za ${DEVICE} i zatražili program za particioniranje da stvori datotečni sustav na uređaju.

note: Type: boolean Description :sl3:
en: Using a random key type means that the partition data is going to be destroyed upon each reboot. This should only be used for swap partitions.
hr: Korištenje naizmjenično odabrane vrste ključa znači da će podaci na particiji biti uništeni pri svakom ponovnom pokretanju sustava. To se treba koristiti samo za swap particije.

note: Type: error Description :sl3:
en: Failed to download crypto components
hr: Neuspjelo preuzimanje kriptografskih komponenti

note: Type: error Description :sl3:
en: An error occurred trying to download additional crypto components.
hr: Dogodila se greška pri preuzimanju dodatnih kriptografskih komponenti.

note: Type: boolean Description :sl3:
en: Proceed to install crypto components despite insufficient memory?
hr: Nastavi s instalacijom kriptografskih komponenti unatoč nedostatku memorije?

note: Type: boolean Description :sl3:
en: There does not seem to be sufficient memory available to install additional crypto components. If you choose to go ahead and continue anyway, the installation process could fail.
hr: Izgleda da nema dovoljno dostupne memorije kako bi se instalirale dodatne kriptografske komponente. Ako odlučite nastaviti unatoč tome, instalacijski proces možda ne uspije.

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) :sl3:
en: Create encrypted volumes
hr: Stvori šifrirane uređaje

note: Type: select Description :sl3:
en: Encryption configuration actions
hr: Radnje podešavanja šifriranja

note: Type: select Description :sl3:
en: This menu allows you to configure encrypted volumes.
hr: Ovaj izbornik omogućuje podešavanje šifriranih uređaja.

note: Type: multiselect Description :sl3:
en: Devices to encrypt:
hr: Uređaji za šifriranje:

note: Type: multiselect Description :sl3:
en: Please select the devices to be encrypted.
hr: Odaberite uređaje za šifriranje.

note: Type: error Description :sl3:
en: No devices selected
hr: Nema odabranih uređaja

note: Type: error Description :sl3:
en: No devices were selected for encryption.
hr: Nema odabranih uređaja za šifriranje.

note: Type: text Description :sl3:
en: Configure iSCSI volumes
hr: Podesi iSCSI uređaje

note: Type: select Choices Note to translators : Please keep your translations of the choices below a 65 columns limit (which means 65 characters in single-byte languages) :sl3:
en: Log into iSCSI targets
hr: Prijava na iSCSI odredišta

note: Type: select Description :sl3:
en: iSCSI configuration actions
hr: Radnje podešavanja iSCSI-a

note: Type: select Description :sl3:
en: This menu allows you to configure iSCSI volumes.
hr: Ovaj izbornik omogućuje podešavanje iSCSI uređaja.

note: Type: string Description :sl3:
en: iSCSI target portal address:
hr: Adresa portala iSCSI odredišta:

note: Type: string Description :sl3:
en: Enter an IP address to scan for iSCSI targets. To use a port other than the default of 3260, use "IP:port" notation, for example "1.2.3.4:3261".
hr: Upišite IP adresu za pretraživanje iSCSI odredišta. Za korištenje ulaza drugačijeg od zadanog 3260, koristite "IP:ulaz", na primjer "1.2.3.4:3261".

note: Type: string Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: iSCSI initiator username for ${PORTAL}:
hr: Korisničko ime iSCSI pokretača za ${PORTAL}:

note: Type: string Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: Some iSCSI targets require the initiator (client) to authenticate using a username and password. If that is the case for this target, enter the username here. Otherwise, leave this blank.
hr: Određena iSCSI odredišta zahtijevaju da se pokretač (klijent) ovjeri korištenjem korisničkog imena i lozinke. Ako je to slučaj za ovo odredište, ovdje upišite korisničko ime. U suprotnome ostavite prazno.

note: Type: password Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: iSCSI initiator password for ${PORTAL}:
hr: Lozinka iSCSI pokretača za ${PORTAL}:

note: Type: password Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: Enter the initiator password needed to authenticate to this iSCSI target.
hr: Upišite lozinku pokretača potrebnu za ovjeru na ovom iSCSI odredištu.

note: Type: string Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: iSCSI target username for ${PORTAL}:
hr: Korisničko ime iSCSI odredišta za ${PORTAL}:

note: Type: string Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: In some environments, the iSCSI target needs to authenticate to the initiator as well as the other way round. If that is the case here, enter the incoming username which the target is expected to supply. Otherwise, leave this blank.
hr: U određenim okruženjima, iSCSI odredište se mora ovjeriti dvosmjerno prema pokretaču i obrnuto. Ako je to ovdje slučaj, upišite dolazno korisničko ime koje odredište očekuje, u suprotnome ostavite prazno.

note: Type: password Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: iSCSI target password for ${PORTAL}:
hr: Lozinka iSCSI odredišta za ${PORTAL}:

note: Type: password Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: Enter the incoming password which the iSCSI target is expected to supply.
hr: Upišite dolaznu lozinku koje iSCSI odredište očekuje.

note: Type: error Description :sl3:
en: No iSCSI targets discovered
hr: Nema otkrivenih iSCSI odredišta

note: Type: error Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: No iSCSI targets were discovered on ${PORTAL}.
hr: Nema otkrivenih iSCSI odredišta na ${PORTAL}.

note: Type: multiselect Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: iSCSI targets on ${PORTAL}:
hr: iSCSI odredišta na ${PORTAL}:

note: Type: multiselect Description :sl3: Translators : do NOT translate the variable name (PORTAL)
en: Select the iSCSI targets you wish to use.
hr: Odaberite iSCSI odredišta koja želite koristiti.

note: Type: error Description :sl3:
en: iSCSI login failed
hr: iSCSI prijava neuspjela

note: Type: error Description :sl3: Translators : do NOT translate the variable names (PORTAL and TARGET)
en: Logging into the iSCSI target ${TARGET} on ${PORTAL} failed.
hr: Prijava na iSCSI odredište ${TARGET} na ${PORTAL} je neuspjela.

note: Type: text Description :sl3:
en: Unallocated physical volumes:
hr: Nedodijeljeni fizički uređaji:

note: Type: text Description :sl3:
en: Volume groups:
hr: Grupe uređaja:

note: Type: text Description :sl3:
en: Uses physical volume:
hr: Koristi fizički uređaj:

note: Type: text Description :sl3:
en: Provides logical volume:
hr: Osigurava logički uređaj:

note: Type: text Description :sl3: "none" here == "No Physical Volumes"
en: none[ Do not translate what's inside the brackets and just put the translation for the word "none" in your language without any brackets. This "none" relates to "Physical Volumes:" ]
hr: nedostupan

note: Type: text Description :sl3: "none" here == "No Volume Groups"
en: none[ Do not translate what's inside the brackets and just put the translation for the word "none" in your language without any brackets. This "none" relates to "Volume Groups:" ]
hr: nedostupne

note: Type: text Description :sl3: Translators: use the acronym for "Physical Volume" in your language here
en: PV
hr: FU

note: Type: text Description :sl3: What is "in use" is a partition
en: In use by LVM volume group ${VG}
hr: Koristi ga ULU grupa uređaja ${VG}

note: Type: text Description :sl3: Menu entry Use infinitive form
en: Display configuration details
hr: Pokaži pojedinosti podešavanja

note: Type: text Description :sl3: Menu entry Use infinitive form
en: Create volume group
hr: Stvori grupu uređaja

note: Type: text Description :sl3: Menu entry Use infinitive form
en: Delete volume group
hr: Obriši grupu uređaja

note: Type: text Description :sl3: Menu entry Use infinitive form
en: Extend volume group
hr: Povećaj grupu uređaja

note: Type: text Description :sl3: Menu entry Use infinitive form
en: Reduce volume group
hr: Smanji grupu uređaja

note: Type: text Description :sl3: Menu entry Use infinitive form
en: Create logical volume
hr: Stvori logički uređaj

note: Type: text Description :sl3: Menu entry Use infinitive form
en: Delete logical volume
hr: Obriši logički uređaj

note: Type: boolean Description :sl3:
en: Write the changes to disks and configure LVM?
hr: Zapiši promjene na diskove i podesi ULU?

note: Type: boolean Description :sl3:
en: Before the Logical Volume Manager can be configured, the current partitioning scheme has to be written to disk. These changes cannot be undone.
hr: Prije nego što krenete podešavati Upravitelja logičkim uređajima, trenutna shema particioniranja mora biti zapisana na disk. Te promjene se ne mogu poništiti.

note: Type: boolean Description :sl3:
en: After the Logical Volume Manager is configured, no additional changes to the partitioning scheme of disks containing physical volumes are allowed during the installation. Please decide if you are satisfied with the current partitioning scheme before continuing.
hr: Nakon što podesite Upravitelja logičkim uređajima, instalacija vam više neće dopustiti dodatne promjene particija na diskovima koji sadrže fizičke uređaje. Odlučite jeste li zadovoljni trenutnom shemom particioniranja na tim diskovima prije nego što nastavite.

note: Type: boolean Description :sl3:
en: Keep current partition layout and configure LVM?
hr: Zadrži trenutni raspored particija i podesi ULU?

note: Type: boolean Description :sl3:
en: After the Logical Volume Manager is configured, no additional changes to the partitions in the disks containing physical volumes are allowed. Please decide if you are satisfied with the current partitioning scheme in these disks before continuing.
hr: Nakon što podesite Upravitelja logičkim uređajima, više neće biti moguće dodatne promjene particija na diskovima koji sadrže fizičke uređaje. Odlučite jeste li zadovoljni trenutnom shemom particioniranja na tim diskovima prije nego što nastavite.

note: Type: error Description :sl3:
en: LVM configuration failure
hr: ULU podešavanje nije uspjelo

note: Type: error Description :sl3:
en: An error occurred while writing the changes to the disks.
hr: Greška se pojavila pri zapisivanju promjena na diskove.

note: Type: error Description :sl3:
en: Logical Volume Manager configuration has been aborted.
hr: Podešavanje Upravitelja logičkim uređajima je prekinuto.

note: Type: text Description :sl3:
en: physical volume for LVM
hr: fizički uređaj za ULU

note: Type: text Description :sl3: keep it short (ideally a 3-letter acronym)
en: lvm
hr: ulu

note: Type: select Description :sl3:
en: Summary of current LVM configuration:
hr: Sažetak trenutnih podešavanja za ULU:

note: Type: select Description :sl3:
en:  Free Physical Volumes:  ${FREE_PVS}
     Used Physical Volumes:  ${USED_PVS}
     Volume Groups:          ${VGS}
     Logical Volumes:        ${LVS}
hr:  Slobodni fizički uređaji:  ${FREE_PVS}
     Iskorišteni fizički uređaji:  ${USED_PVS}
     Grupe uređaja:         ${VGS}
     Logički uređaji:        ${LVS}

note: Type: note Description :sl3:
en: Current LVM configuration:
hr: Trenutne postavke ULU-a:

note: Type: error Description :sl3:
en: No physical volumes were selected. The creation of a new volume group has been aborted.
hr: Nema odabranih fizičkih uređaja. Stvaranje nove grupe uređaja je prekinuto.

note: Type: error Description :sl3:
en: No name for the volume group has been entered. Please enter a name.
hr: Nema upisanog naziva grupe uređaja. Upišite naziv.

note: Type: error Description :sl3:
en: The selected volume group name is already in use. Please choose a different name.
hr: Odabrani naziv grupe uređaja se već koristi. Odaberite drugi naziv.

note: Type: error Description :sl3:
en: The selected volume group name overlaps with an existing device name. Please choose a different name.
hr: Odabrani naziv grupe uređaja preklapa se s nazivom postojećeg uređaja. Odaberite drugi naziv.

note: Type: error Description :sl3:
en: Error while creating volume group
hr: Greška pri stvaranju grupe uređaja

note: Type: error Description :sl3:
en: The volume group ${VG} could not be created.
hr: Grupa uređaja ${VG} se ne može stvoriti.

note: Type: error Description :sl3:
en: No physical volumes were selected. Extension of the volume group has been aborted.
hr: Nema odabranih fizičkih uređaja. Povećavanje grupe uređaja je prekinuto.

note: Type: multiselect Description :sl3:
en: Devices to remove from the volume group:
hr: Uređaji za uklanjanje iz grupe uređaja:

note: Type: multiselect Description :sl3:
en: Please select the devices you wish to remove from the volume group.
hr: Odaberite uređaje koje želite ukloniti iz grupe uređaja.

note: Type: error Description :sl3:
en: No physical volumes were selected. Reduction of the volume group was aborted.
hr: Nema odabranih fizičkih uređaja. Smanjivanje grupe uređaja je prekinuto.

note: Type: error Description :sl3:
en: No name for the logical volume has been entered. Please enter a name.
hr: Nema naziva logičkog uređaja. Upišite naziv.

note: Type: error Description :sl3:
en: No logical volume has been found. Please create a logical volume first.
hr: Nije pronađen logički uređaj. Prvo ga stvorite.

note: Type: select Description :sl3:
en: Please select the logical volume to delete.
hr: Odaberite logički uređaj za brisanje.

note: Type: text Description :sl3:
en: in VG ${VG}
hr: u GU ${VG}

note: Type: error Description :sl3:
en: The logical volume ${LV} on ${VG} could not be deleted.
hr: Logički uređaj ${LV} na ${VG} se ne može obrisati.

note: Type: error Description :sl3:
en: Error while initializing physical volume
hr: Greška pri pokretanju fizičkog uređaja

note: Type: error Description :sl3:
en: The physical volume ${PV} could not be initialized.
hr: Fizički uređaj (${PV}) je nemoguće pokrenuti.

note: Type: error Description :sl3:
en: Invalid logical volume or volume group name
hr: Neispravan naziv grupe uređaja ili logičkog uređaja

note: Type: error Description :sl3:
en: Logical volume or volume group names may only contain alphanumeric characters, hyphen, plus, period, and underscore. They must be 128 characters or less and may not begin with a hyphen. The names "." and ".." are not allowed. In addition, logical volume names cannot begin with "snapshot".
hr: Nazivi logičkih uređaja ili grupa uređaja mogu sadržavati samo slova, brojeve, crticu, plus, točku i podvlaku. Oni moraju biti dugački 128 znakova ili manje i ne smiju počinjati crticom. Nazivi "." i ".." nisu dopušteni. Osim toga, nazivi logičkih uređaja ne mogu počinjati sa "snapshot".

note: Type: error Description :sl3:
en: Please choose a different name.
hr: Odaberite drugačiji naziv.

note: Type: boolean Description :sl3:
en: Remove existing logical volume data?
hr: Ukloni postojeće podatke o logičkim uređajima?

note: Type: boolean Description :sl3:
en: The selected device already contains the following LVM logical volumes, volume groups and physical volumes which are about to be removed:
hr: Odabrani uređaj već sadrži sljedeće ULU logičke uređaje, grupe uređaja i fizičke uređaje koji će se sada ukloniti:

note: Type: boolean Description :sl3:
en: Logical volume(s) to be removed: ${LVTARGETS}
hr: Logički uređaji koji će se ukloniti: ${LVTARGETS}

note: Type: boolean Description :sl3:
en: Volume group(s) to be removed: ${VGTARGETS}
hr: Grupe uređaja koje će se ukloniti: ${VGTARGETS}

note: Type: boolean Description :sl3:
en: Physical volume(s) to be removed: ${PVTARGETS}
hr: Fizički uređaji koji će se ukloniti: ${PVTARGETS}

note: Type: boolean Description :sl3:
en: Note that this will also permanently erase any data currently on the logical volumes.
hr: Uzmite u obzir da će ovo zauvijek obrisati sve podatke koji su trenutno na logičkim uređajima.

note: Type: error Description :sl3:
en: Unable to automatically remove LVM data
hr: Nemoguće je automatski obrisati ULU podatke

note: Type: error Description :sl3:
en: Because the volume group(s) on the selected device also consist of physical volumes on other devices, it is not considered safe to remove its LVM data automatically. If you wish to use this device for partitioning, please remove its LVM data first.
hr: Zbog toga što grupe uređaja na odabranom uređaju također sadržavaju i fizičke uređaje na drugim uređajima, automatsko brisanje ULU podataka na njemu nije sigurna radnja. Ako želite koristiti ovaj uređaj za particioniranje, prvo obrišite njegove ULU podatke.

note: Type: note Description :sl3:
en: Logical Volume Management
hr: Upravljanje logičkim uređajima

note: Type: note Description :sl3:
en: A common situation for system administrators is to find that some disk partition (usually the most important one) is short on space, while some other partition is underused. The Logical Volume Manager (LVM) can help with this.
hr: Čest je slučaj kada administratori sustava pronalaze da nekoj diskovnoj particiji (obično ona najbitnija) nedostaje slobodnog prostora, dok neka druga particija nije dovoljno iskorištena. Upravitelj logičkim uređajima (ULU) tada može pomoći.

note: Type: note Description :sl3:
en: LVM allows combining disk or partition devices ("physical volumes") to form a virtual disk ("volume group"), which can then be divided into virtual partitions ("logical volumes"). Volume groups and logical volumes may span several physical disks. New physical volumes may be added to a volume group at any time, and logical volumes can be resized up to the amount of unallocated space in the volume group.
hr: ULU omogućuje kombiniranje diskovnih ili particijskih uređaja ("fizičkih uređaja") kako bi se stvorio virtualni disk ("grupa uređaja"), koja se onda može podijeliti u virtualne particije ("logičke uređaje"). Grupe uređaja i logički uređaji mogu prelaziti preko više fizičkih diskova. Novi fizički uređaji se mogu u bilo kojem trenutku dodavati u grupe uređaja, a logički uređaji se mogu povećavati do najveće veličine određene nedodjeljenim prostorom u grupi uređaja.

note: Type: note Description :sl3:
en: The items on the LVM configuration menu can be used to edit volume groups and logical volumes. After you return to the main partition manager screen, logical volumes will be displayed in the same way as ordinary partitions, and should be treated as such.
hr: Izbornik postavki ULU-a se može koristiti za uređivanje grupa uređaja i logičkih uređaja. Kada se vratite u glavni izbornik uređivanja particija, logički uređaji će biti prikazani na isti način kao obične particije, jer se prema njima tako treba i odnositi.

note: Type: text Description :sl3:
en: Software RAID device
hr: Softverski RAID uređaj

note: Type: text Description :sl3:
en: Configure software RAID
hr: Podesi softverski RAID

note: Type: text Description :sl3: What is "in use" is a partition
en: In use by software RAID device ${DEVICE}
hr: Koristi softverski RAID uređaj ${DEVICE}

note: Type: error Description :sl3:
en: Software RAID not available
hr: Softverski RAID nije dostupan

note: Type: error Description :sl3:
en: The current kernel doesn't seem to support software RAID (MD) devices. This should be solved by loading the necessary modules.
hr: Trenutni kernel ne podržava softverske RAID (VD) uređaje. To možete riješiti učitavanjem potrebnih modula.

note: Type: select Description :sl3:
en: Software RAID configuration actions
hr: Radnje podešavanja softverskog RAID-a

note: Type: select Description :sl3:
en: This is the software RAID (or MD, "multiple device") configuration menu.
hr: Ovo je izbornik podešavanja softverskog RAID-a (ili VD-a, višediskovnog uređaja).

note: Type: select Description :sl3:
en: Please select one of the proposed actions to configure software RAID.
hr: Odaberite jednu od predloženih radnji za podešavanje softverskog RAID-a.

note: Type: select Description :sl3:
en: Software RAID device type:
hr: Vrsta softverskog RAID uređaja:

note: Type: select Description :sl3:
en: Please choose the type of the software RAID device to be created.
hr: Odaberite vrstu softverskog RAID uređaja koji će biti stvoren.

note: Type: error Description :sl3:
en: No unused partitions of the type "Linux RAID Autodetect" are available. Please create such a partition, or delete an already used software RAID device to free its partitions.
hr: Nema raspoloživih particija vrste "Linux RAID Autodetect". Stvorite takvu particiju, ili obrišite već korišteni softverski RAID uređaj kako bi oslobodili njegove particije.

note: Type: multiselect Description :sl3:
en: Active devices for the RAID0 array:
hr: Aktivni uređaji za RAID0 polje:

note: Type: string Description :sl3:
en: The RAID${LEVEL} array will consist of both active and spare devices. The active devices are those used, while the spare devices will only be used if one or more of the active devices fail. A minimum of ${MINIMUM} active devices is required.
hr: RAID${LEVEL} polje obuhvaćati će i aktivne i pričuvne uređaje. Aktivni uređaji će se koristiti uvijek, a pričuvni uređaji će se koristiti samo ako jedan ili više aktivnih uređaja zataji. Potrebno je imati najmanje ${MINIMUM} aktivna uređaja.

note: Type: multiselect Description :sl3:
en: Active devices for the RAID${LEVEL} array:
hr: Aktivni uređaji za RAID${LEVEL} polje:

note: Type: multiselect Description :sl3:
en: Spare devices for the RAID${LEVEL} array:
hr: Pričuvni uređaji za RAID${LEVEL} polje:

note: Type: multiselect Description :sl3:
en: Please choose which partitions will be used as spare devices. You may choose up to ${COUNT} partitions. If you choose less than ${COUNT} devices, the remaining partitions will be added to the array as "missing". You will be able to add them to the array later.
hr: Odaberite koje će se particije koristiti kao pričuvni uređaji. Možete odabrati do ${COUNT} particija. Ako odaberete manje od ${COUNT} uređaja, preostale particije biti će dodane polju kao "nedostaje". Kasnije ćete moći i njih dodati polju.

note: Type: string Description :sl3:
en: Layout of the RAID10 array:
hr: Raspored RAID10 polja:

note: Type: select Description :sl3:
en: Software RAID device to be deleted:
hr: Softverski RAID uređaj za brisanje:

note: Type: select Description :sl3:
en: Deleting a software RAID device will stop it and clear the superblock of all its components.
hr: Brisanje softverskog RAID uređaja zaustavit će ga i obrisati superblokove svih njegovih komponenti.

note: Type: select Description :sl3:
en: Please note this will not immediately allow you to reuse the partitions or devices in a new software RAID device. The array will however be unusable after the deletion.
hr: Uzmite u obzir da vam to neće omogućiti trenutno korištenje particije ili uređaja u novom softverskom RAID uređaju. Polje će biti neupotrebljivo nakon brisanja.

note: Type: error Description :sl3:
en: No software RAID devices available
hr: Nema raspoloživih softverskih RAID uređaja

note: Type: error Description :sl3:
en: No software RAID devices are available for deletion.
hr: Nema raspoloživih softverskih RAID uređaja za brisanje.

note: Type: boolean Description :sl3:
en: Really delete this software RAID device?
hr: Stvarno želite obrisati ovaj softverski RAID uređaj?

note: Type: boolean Description :sl3:
en: Please confirm whether you really want to delete the following software RAID device:
hr: Potvrdite želite li stvarno obrisati sljedeći softverski RAID uređaj:

note: Type: error Description :sl3:
en: Failed to delete the software RAID device
hr: Neuspjelo brisanje softverskog RAID uređaja

note: Type: error Description :sl3:
en: There was an error deleting the software RAID device. It may be in use.
hr: Dogodila se greška pri brisanju softverskog RAID uređaja. Možda je se koristi.

note: Type: boolean Description :sl3:
en: Write the changes to the storage devices and configure RAID?
hr: Zapiši promjene na uređaje pohrane i podesi RAID?

note: Type: boolean Description :sl3:
en: Before RAID can be configured, the changes have to be written to the storage devices.  These changes cannot be undone.
hr: Prije RAID podešavanja, promjene moraju biti zapisane na uređaj pohrane.  Te promjene se ne mogu poništiti.

note: Type: boolean Description :sl3:
en: When RAID is configured, no additional changes to the partitions in the disks containing physical volumes are allowed.  Please convince yourself that you are satisfied with the current partitioning scheme in these disks.
hr: Kada je RAID podešen, više nisu dopuštene promjene particija na diskovima koji sadrže fizičke uređaje.   Uvjerite se da ste zadovoljni trenutnom shemom particioniranja tih diskova.

note: Type: boolean Description :sl3:
en: Keep current partition layout and configure RAID?
hr: Zadrži trenutni raspored particija i podesi RAID?

note: Type: error Description :sl3:
en: RAID configuration failure
hr: RAID podešavanje neuspjelo

note: Type: error Description :sl3:
en: RAID configuration has been aborted.
hr: RAID podešavanje prekinuto.

note: Type: text Description :sl3:
en: physical volume for RAID
hr: fizički uređaj za RAID

note: Type: boolean Description :sl3:
en: Remove existing software RAID partitions?
hr: Ukloni postojeće particije softverskog RAID-a?

note: Type: boolean Description :sl3:
en: The selected device contains partitions used for software RAID devices. The following devices and partitions are about to be removed:
hr: Odabrani uređaj sadrži particije korištene za softverske RAID uređaje. Sljedeći uređaji i particije će biti uklonjeni:

note: Type: boolean Description :sl3:
en: Software RAID devices about to be removed: ${REMOVED_DEVICES}
hr: Softverski RAID uređaji koji će biti uklonjeni: ${REMOVED_DEVICES}

note: Type: boolean Description :sl3:
en: Partitions used by these RAID devices: ${REMOVED_PARTITIONS}
hr: Particije koje koriste ovi RAID uređaji: ${REMOVED_PARTITIONS}

note: Type: boolean Description :sl3:
en: Note that this will also permanently erase any data currently on the software RAID devices.
hr: Uzmite u obzir da će ovo trajno obrisati sve prisutne podatke koji se trenutno nalaze na softverskim RAID uređajima.

note: Type: text Description Main menu item Translators: keep below 55 columns :sl3:
en: Download debconf preconfiguration file
hr: Preuzmi debconf predpodešenu datoteku

note: Type: string Description :sl3:
en: Location of initial preconfiguration file:
hr: Lokacija početne datoteke predpodešavanja:

note: Type: string Description :sl3:
en: In order to perform an automated install, you need to supply a preconfiguration file (which can in turn pull in other files). To do that, you need to provide a (perhaps partial) URL.
hr: Kako bi se obavila automatska instalacija, trebate osigurati datoteku predpodešavanja (koja će dobaviti ostale datoteke). Za to trebate navesti (možda djelomični) URL.

note: Type: string Description :sl3:
en: This can be as simple as the machine name where your preseed files reside up to a full URL. Any of these could be made to work:
      intra		[for example.com, these three are equivalent]
      intra.example.com
      http://intra.example.com/d-i/./lenny/preseed.cfg
      http://192.168.0.1/~phil/test47.txt
      floppy://preseed.cfg
      file:///hd-media/kiosk/./preseed.cfg
hr: To može biti nešto poput običnog naziva računala, datoteka ili postojeća poveznica na datoteku ili potpuni URL. Sve od navedenog bi moglo raditi:
      intra		[za primjer.com, sve tri su jednake]
      intra.primjer.com
      http://intra.primjer.com/d-i/./lenny/preseed.cfg
      http://192.168.0.1/~phil/test47.txt
      floppy://preseed.cfg
      file:///hd-media/kiosk/./preseed.cfg

note: Type: string Description :sl3:
en: For fully automated installs, preseed/url should itself be preseeded (via kernel command line, DHCP, or syslinux.cfg on customised media).
hr: Za potpuno automatsku instalaciju, preseed/url trebao bi biti sam predložen (putem naredbenog retka kernela, DHCP-a ili syslinux.cfg na prilagođenom mediju).

note: Type: string Description :sl3:
en: See http://wiki.debian.org/DebianInstaller/Preseed for inspiration.
hr: Posjetite http://wiki.debian.org/DebianInstaller/Preseed za inspiraciju.

note: Type: text Description Main menu item Translators: keep below 55 columns :sl3:
en: Load debconf preconfiguration file
hr: Učitaj debconf datoteku predpodešavanja

note: Type: text Description :sl3:
en: No partitions found
hr: Nema pronađenih particija

note: Type: text Description :sl3:
en: The installer could not find any partitions, so you will not be able to mount a root file system. This may be caused by the kernel failing to detect your hard disk drive or failing to read the partition table, or the disk may be unpartitioned. If you wish, you may investigate this from a shell in the installer environment.
hr: Instalacijski program nije mogao pronaći nijednu particiju, stoga nećete moći montirati korijenski datotečni sustav. Ovo može biti uzrokovano kernelom koji nije uspio otkriti vaš čvrsti disk ili nije uspio pročitati particijsku tablicu, ili disk nije particioniran. Ako želite, možete ovo istražiti koristeći ljusku u okruženju instalacijskog programa.

note: Type: select Choices :sl3:
en: Assemble RAID array
hr: Sastavi RAID polje

note: Type: select Choices :sl3:
en: Do not use a root file system
hr: Ne koristi korijenski datotečni sustav

note: Type: select Description :sl3:
en: Device to use as root file system:
hr: Uređaj koji će se koristiti kao korijenski datotečni sustav:

note: Type: select Description :sl3:
en: Enter a device you wish to use as your root file system. You will be able to choose among various rescue operations to perform on this file system.
hr: Upišite uređaj koji želite koristiti kako svoj korijenski datotečni sustav. Biti ćete u mogućnosti odabrati pokretanje različitih radnji popravka na ovom datotečnom sustavu.

note: Type: select Description :sl3:
en: If you choose not to use a root file system, you will be given a reduced choice of operations that can be performed without one. This may be useful if you need to correct a partitioning problem.
hr: Ako ne odaberete korištenje korijenskog datotečnog sustava, bit će vam dan smanjen izbor radnji koje se mogu izvesti bez njega. Ovo može biti korisno ako morate ispraviti problem prilikom particioniranja.

note: Type: error Description :sl3:
en: No such device
hr: Nema takvog uređaja

note: Type: error Description :sl3:
en: The device you entered for your root file system (${DEVICE}) does not exist. Please try again.
hr: Uređaj koji ste unijeli za svoj korijenski datotečni sustav (${DEVICE}) ne postoji. Pokušajte ponovno.

note: Type: error Description :sl3:
en: Mount failed
hr: Montiranje nije uspjelo

note: Type: error Description :sl3:
en: An error occurred while mounting the device you entered for your root file system (${DEVICE}) on /target.
hr: Pojavila se greška prilikom montiranja uređaja koji ste unijeli za svoj korijenski datotečni sustav (${DEVICE}) na /target.

note: Type: error Description :sl3:
en: Please check the syslog for more information.
hr: Provjerite syslog za više informacija.

note: Type: select Description :sl3:
en: Rescue operations
hr: Radnje popravka

note: Type: error Description :sl3:
en: Rescue operation failed
hr: Radnje popravka nisu uspjele

note: Type: error Description :sl3:
en: The rescue operation '${OPERATION}' failed with exit code ${CODE}.
hr: Radnja popravka '${OPERATION}' nije uspjela uz izlazni kôd ${CODE}.

note: Type: text Description :sl3:
en: Execute a shell in ${DEVICE}
hr: Pokreni ljusku u ${DEVICE}

note: Type: text Description :sl3:
en: Execute a shell in the installer environment
hr: Pokreni ljusku u okruženju instalacijskog programa

note: Type: text Description :sl3:
en: Choose a different root file system
hr: Odaberi drugi korijenski datotečni sustav

note: Type: text Description :sl3:
en: Reboot the system
hr: Ponovo pokreni sustav

note: Type: text Description :sl3:
en: Executing a shell
hr: Pokretanje ljuske

note: Type: text Description :sl3:
en: After this message, you will be given a shell with ${DEVICE} mounted on "/". If you need any other file systems (such as a separate "/usr"), you will have to mount those yourself.
hr: Nakon ove poruke, ući ćete u ljusku sa ${DEVICE} montiranim na "/". Ako vam je potreban bilo koji drugi datotečni sustav (poput odvojenog /usr), morat ćete ga montirati sami.

note: Type: error Description :sl3:
en: Error running shell in /target
hr: Greška pokretanja ljuske u /target

note: Type: error Description :sl3:
en: A shell (${SHELL}) was found on your root file system (${DEVICE}), but an error occurred while running it.
hr: Ljuska (${SHELL}) je pronađena na vašem korijenskom datotečnom sustavu (${DEVICE}), ali se pojavila greška pri izvođenju ljuske.

note: Type: error Description :sl3:
en: No shell found in /target
hr: Nema pronađene ljuske na /target

note: Type: error Description :sl3:
en: No usable shell was found on your root file system (${DEVICE}).
hr: Nema upotrebljive ljuske na vašem korijenskom datotečnom sustavu (${DEVICE}).

note: Type: text Description :sl3:
en: Interactive shell on ${DEVICE}
hr: Interaktivna ljuska na ${DEVICE}

note: Type: text Description :sl3:
en: After this message, you will be given a shell with ${DEVICE} mounted on "/target". You may work on it using the tools available in the installer environment. If you want to make it your root file system temporarily, run "chroot /target". If you need any other file systems (such as a separate "/usr"), you will have to mount those yourself.
hr: Nakon ove poruke, ući ćete u ljusku sa ${DEVICE} montiranim na "/target". Možete s njim raditi koristeći alate dostupne u okruženju instalacijskog programa. Ako ga želite privremeno učiniti korijenskim datotečnim sustavom, pokrenite "chroot /target". Ako trebate neke druge datotečne sustave (poput odvojenog /usr), morat ćete ih montirati sami.

note: Type: text Description :sl3:
en: After this message, you will be given a shell in the installer environment. No file systems have been mounted.
hr: Nakon ove poruke, ući ćete u ljusku u okruženju instalacijskog programa. Nema montiranih datotečnih sustava.

note: Type: text Description :sl3:
en: Interactive shell in the installer environment
hr: Interaktivna ljuska u okruženju instalacijskog programa

note: Type: password Description :sl3:
en: Passphrase for ${DEVICE}:
hr: Lozinka za ${DEVICE}:

note: Type: password Description :sl3:
en: Please enter the passphrase for the encrypted volume ${DEVICE}.
hr: Upišite lozinku za šifrirani uređaj ${DEVICE}.

note: Type: password Description :sl3:
en: If you don't enter anything, the volume will not be available during rescue operations.
hr: Ako ne upišete ništa, taj uređaj neće biti dostupan za vrijeme radnji popravka.

note: Type: multiselect Choices :sl3:
en: Automatic
hr: Automatski

note: Type: multiselect Description :sl3:
en: Partitions to assemble:
hr: Particije za sastavljanje:

note: Type: multiselect Description :sl3:
en: Select the partitions to assemble into a RAID array. If you select "Automatic", then all devices containing RAID physical volumes will be scanned and assembled.
hr: Odaberite particije od kojih će biti sastavljeno RAID polje. Ako odaberete "Automatski", onda će se svi uređaji koji sadrže fizičke RAID uređaje biti pretraženi i sastavljeni.

note: Type: multiselect Description :sl3:
en: Note that a RAID partition at the end of a disk may sometimes cause that disk to be mistakenly detected as containing a RAID physical volume. In that case, you should select the appropriate partitions individually.
hr: Uzmite u obzir da RAID particija na kraju diska može uzrokovati da se taj disk krivo detektira kao da sadrži RAID fizički prostor. U tom slučaju, trebate prikladne particije odabrati pojedinačno.

note: Type: boolean Description :sl3:
en: Mount separate ${FILESYSTEM} partition?
hr: Montiraj zasebnu ${FILESYSTEM} particiju?

note: Type: boolean Description :sl3:
en: The installed system appears to use a separate ${FILESYSTEM} partition.
hr: Izgleda da instalirani sustav koristi zasebnu ${FILESYSTEM} particiju.

note: Type: boolean Description :sl3:
en: It is normally a good idea to mount it as it will allow operations such as reinstalling the boot loader. However, if the file system on ${FILESYSTEM} is corrupt then you may want to avoid mounting it.
hr: Uobičajeno je dobra ideja montirati ga jer će dopustiti radnje poput ponovne instalacije učitača pokretanja. Ipak, ako je datotečni sustav na ${FILESYSTEM} oštećen tada je preporučljivo da izbjegavate montiranje.

note: Type: select Description :sl3:
en: If the desired time zone is not listed, then please go back to the step "Choose language" and select a country that uses the desired time zone (the country where you live or are located).
hr: Ako željena vremenska zona nije prikazana, vratite se natrag na korak "Odaberi jezik" i odaberite zemlju koja sadrži željenu vremensku zonu (zemlja u kojoj živite ili trenutno boravite).

note: Type: text Description :sl3:
en: Coordinated Universal Time (UTC)
hr: Koordinirano svjetsko vrijeme (UTC)

note: Type: text Description :sl3:
en: Select your time zone:
hr: Odaberite svoju vremensku zonu:

note: Type: text Description :sl3:
en: Select a location in your time zone:
hr: Odaberite lokaciju u vašoj vremenskoj zoni:

note: Type: text Description :sl3:
en: Select a city in your time zone:
hr: Odaberite grad u vašoj vremenskoj zoni:

note: Type: text Description :sl3:
en: Select the state or province to set your time zone:
hr: Odaberite državu ili pokrajinu za postavljanje vaše vremenske zone:

note: Type: select Choices :sl3:
en: McMurdo
hr: McMurdo postaja

note: Type: select Choices :sl3:
en: Rothera
hr: Rothera postaja

note: Type: select Choices :sl3:
en: Palmer
hr: Palmer postaja

note: Type: select Choices :sl3:
en: Mawson
hr: Mawson postaja

note: Type: select Choices :sl3:
en: Davis
hr: Davis postaja

note: Type: select Choices :sl3:
en: Casey
hr: Casey postaja

note: Type: select Choices :sl3:
en: Vostok
hr: Vostok postaja

note: Type: select Choices :sl3:
en: Dumont-d'Urville
hr: Dumont-d'Urville postaja

note: Type: select Choices :sl3:
en: Syowa
hr: Syowa postaja

note: Type: select Choices :sl3:
en: Australian Capital Territory
hr: Teritorij australskog glavnog grada

note: Type: select Choices :sl3:
en: New South Wales
hr: Novi Južni Wales

note: Type: select Choices :sl3:
en: Victoria
hr: Viktoria

note: Type: select Choices :sl3:
en: Northern Territory
hr: Sjeverni teritorij

note: Type: select Choices :sl3:
en: South Australia
hr: Južna Australija

note: Type: select Choices :sl3:
en: Tasmania
hr: Tasmanija

note: Type: select Choices :sl3:
en: Western Australia
hr: Zapadna Australija

note: Type: select Choices :sl3:
en: Yancowinna County
hr: Yancowinna okrug

note: Type: select Choices :sl3:
en: Lord Howe Island
hr: Lord Howe otok

note: Type: select Choices :sl3:
en: Amazonas
hr: Amazona

note: Type: select Choices :sl3:
en: Distrito Federal
hr: Federalni distrikt

note: Type: select Choices :sl3:
en: Atlantic
hr: Atlantik

note: Type: select Choices :sl3:
en: Eastern
hr: Istočno

note: Type: select Choices :sl3:
en: Central
hr: Središnje

note: Type: select Choices :sl3:
en: East Saskatchewan
hr: Istočni Saskatchewan

note: Type: select Choices :sl3:
en: Mountain
hr: Planinska

note: Type: select Choices :sl3:
en: Pacific
hr: Pacifik

note: Type: select Choices :sl3:
en: Easter Island
hr: Uskršnji otok

note: Type: select Choices :sl3:
en: Canary Islands
hr: Kanarsko otočje

note: Type: select Choices :sl3:
en: Western (Sumatra, Jakarta, Java, West and Central Kalimantan)
hr: Zapadna (Sumatra, Jakarta, Java, Zapadni i Središnji Kalimantan)

note: Type: select Choices :sl3:
en: Central (Sulawesi, Bali, Nusa Tenggara, East and South Kalimantan)
hr: Središnja (Sulawesi, Bali, Nusa Tenggara, Istočni i Južni Kalimantan)

note: Type: select Choices :sl3:
en: Eastern (Maluku, Papua)
hr: Istočna (Maluku, Papua)

note: Type: select Choices :sl3:
en: Tarawa (Gilbert Islands)
hr: Tarawa (Gilbertovi otoci)

note: Type: select Choices :sl3:
en: Enderbury (Phoenix Islands)
hr: Enderbury (Phoenix otočje)

note: Type: select Choices :sl3:
en: Kiritimati (Line Islands)
hr: Kiritimati (Line otočje)

note: Type: select Choices :sl3:
en: Ulaanbaatar
hr: Ulan Bator

note: Type: select Choices :sl3:
en: North-West
hr: Sjeverozapad

note: Type: select Choices :sl3:
en: South-East
hr: Jugoistok

note: Type: select Choices :sl3:
en: Chatham Islands
hr: Otoci Chatham

note: Type: select Choices :sl3:
en: Tahiti (Society Islands)
hr: Tahiti (Society otočje)

note: Type: select Choices :sl3:
en: Marquesas Islands
hr: Markižansko otočje

note: Type: select Choices :sl3:
en: Gambier Islands
hr: Gambiersko otočje

note: Type: select Choices :sl3:
en: Lisbon
hr: Lisabon

note: Type: select Choices :sl3:
en: Madeira Islands
hr: Madeiransko otočje

note: Type: select Choices :sl3:
en: Azores
hr: Azori

note: Type: select Choices :sl3:
en: Moscow-01 - Kaliningrad
hr: Moskva-01 - Kalinjingrad

note: Type: select Choices :sl3:
en: Moscow+00 - Moscow
hr: Moskva+00 - Moskva

note: Type: select Choices :sl3:
en: Moscow+01 - Samara
hr: Moskva+01 - Samara

note: Type: select Choices :sl3:
en: Moscow+02 - Yekaterinburg
hr: Moskva+02 - Jekaterinburg

note: Type: select Choices :sl3:
en: Moscow+03 - Omsk
hr: Moskva+03 - Omsk

note: Type: select Choices :sl3:
en: Moscow+04 - Krasnoyarsk
hr: Moskva+04 - Krasnojarsk

note: Type: select Choices :sl3:
en: Moscow+05 - Irkutsk
hr: Moskva+05 - Irkutsk

note: Type: select Choices :sl3:
en: Moscow+06 - Yakutsk
hr: Moskva+06 - Jakutsk

note: Type: select Choices :sl3:
en: Moscow+07 - Vladivostok
hr: Moskva+07 - Vladivostok

note: Type: select Choices :sl3:
en: Moscow+08 - Magadan
hr: Moskva+08 - Magadan

note: Type: select Choices :sl3:
en: Moscow+09 - Kamchatka
hr: Moskva+09 - Kamčatka

note: Type: select Choices :sl3:
en: Johnston Atoll
hr: Atol Johnston

note: Type: select Choices :sl3:
en: Midway Islands
hr: Atol Midway

note: Type: select Choices :sl3:
en: Wake Island
hr: Otok Wake

note: Type: select Choices :sl3:
en: Hawaii
hr: Havaji

note: Type: select Choices :sl3:
en: East Indiana
hr: Istočna Indiana

note: Type: select Choices Time zone for Papua New Guinea :sl3:
en: Bougainville
hr: Otok Bougainville
