debian-installer - en to tl translation catalogue (28 entries)

note: Type: text Description :sl4:
en: Display this help message
tl: Ipakita ang payo na ito

note: Type: text Description :sl4:
en: Go back to previous question
tl: Bumalik sa nakaraang tanong

note: Type: text Description :sl4:
en: Select an empty entry
tl: Pumili ng blankong punan

note: Type: text Description :sl4:
en: Prompt: '%c' for help, default=%d>
tl: Prompt: '%c' para sa tulong, default=%d>

note: Type: text Description :sl4:
en: Prompt: '%c' for help>
tl: Prompt: '%c' para sa tulong>

note: Type: text Description :sl4:
en: Prompt: '%c' for help, default=%s>
tl: Prompt: '%c' para sa tulong, default=%s>

note: Type: text Description :sl4:
en: [Press enter to continue]
tl: [Pindutin ang enter para makapagpatuloy]

note: Type: select Description :sl4:
en: Interface to use:
tl: Mukha na gagamitin:

note: Type: select Description :sl4:
en: Packages that use debconf for configuration share a common look and feel. You can select the type of user interface they use.
tl: Ang mga pakete na gumagamit ng debconf para sa pagsasaayos ay magkatulad ng hitsura at pakiramdam. Maaari niyong piliin ang uri ng user interface na gagamitin nila.

note: Type: text Description This item is a progress bar heading when the system configures some flashable memory used by many embedded devices :sl4:
en: Configuring flash memory to boot the system
tl: Isinasaayos ang flash memory upang iboot ang sistema

note: Type: text Description This item is a progress bar heading when an embedded device is configured so it will boot from disk :sl4:
en: Making the system bootable
tl: Ginagawang bootable ang sistema

note: Type: text Description This is "preparing the system" to flash the kernel and initrd on a flashable memory :sl4:
en: Preparing the system...
tl: Hinahanda ang sistema...

note: Type: text Description This is a progress bar showing up when the system write the kernel to the flashable memory of the embedded device :sl4:
en: Writing the kernel to flash memory...
tl: Isinusulat ang kernel sa flash memory...

note: Type: text Description This is a progress bar showing up when the system generates a special boot image on disk for some embedded device so they can boot. :sl4:
en: Generating boot image on disk...
tl: Binubuo ang boot image sa disk...

note: Type: text Description Main menu item Translators: keep below 55 columns This item is a menu entry for a step where the system configures the flashable memory used by many embedded devices (writing the kernel and initrd to it) :sl4:
en: Make the system bootable
tl: Gawing bootable ang sistema

note: Type: error Description :sl4:
en: Warning: Your system may be unbootable!
tl: Babala: Maaaring hindi mag-boot ang inyong sistema!

note: Type: error Description :sl4:
en: Failed to mount /target/proc
tl: Bigo ang pag-mount ng /target/proc

note: Type: error Description :sl4:
en: Mounting the proc file system on /target/proc failed.
tl: Bigo ang pag-mount ng proc file system sa /target/proc.

note: Type: note Description :sl4:
en: Setting firmware variables for automatic boot
tl: Tinatakda ang mga firmware variable para sa awtomatikong pag-boot

note: Type: note Description :sl4:
en: Some variables need to be set in the Genesi firmware in order for your system to boot automatically.  At the end of the installation, the system will reboot.  At the firmware prompt, set the following firmware variables to enable auto-booting:
tl: May mga variable na kailangang itakda sa Genesi firmware upang mag-boot ng awtomatiko.  Sa katapusan ng pagluklok, mag-re-reboot ang sistema.  Sa firmware prompt, itakda ang mga sumusunod na mga firmware variable upang gumana ang auto-booting:

note: Type: note Description :sl4:
en: You will only need to do this once.  Afterwards, enter the "boot" command or reboot the system to proceed to your newly installed system.
tl: Kinakailangan lang ninyong gawin ito ng isang beses.  Matapos nito, ipasok ang "boot" na utos o i-reboot ang sistema upang magpatuloy sa inyong bagong luklok na sistema.

note: Type: note Description :sl4:
en: Alternatively, you will be able to boot the kernel manually by entering, at the firmware prompt:
tl: Sa halip, maaari kayong mag-boot ng kernel ng mano-mano sa pamamagitan ng pagbigay sa firmware prompt ng:

note: Type: note Description :sl4:
en: Some variables need to be set in CFE in order for your system to boot automatically. At the end of installation, the system will reboot. At the firmware prompt, set the following variables to simplify booting:
tl: May mga variable na kailangang itakda sa CFE upang mag-boot ng awtomatiko.  Sa katapusan ng pagluklok, mag-re-reboot ang sistema.  Sa firmware prompt, itakda ang mga sumusunod na mga firmware variable upang mapadali ang booting:

note: Type: note Description :sl4:
en: You will only need to do this once. This enables you to just issue the command "boot_debian" at the CFE prompt.
tl: Kinakailangang gawin ito ng isang beses lamang. Dahil dito ay maaaring magbigay ng utos na "boot_debian" sa CFE prompt.

note: Type: note Description :sl4:
en: If you prefer to auto-boot on every startup, you can set the following variable in addition to the ones above:
tl: Kung nais na mag-auto-boot tuwing startup, maaaring itakda ang mga sumusunod na mga variable bukod sa mga nakalista sa itaas:

note: Type: text Description eg. Virtual disk 1 (xvda) :sl4:
en: Virtual disk %s (%s)
tl: Birtwal na disk %s (%s)

note: Type: text Description eg. Virtual disk 1, partition #1 (xvda1) :sl4:
en: Virtual disk %s, partition #%s (%s)
tl: Virtual disk %s, partisyon #%s (%s)

note: Type: text Description :sl4:
en: In order to start your new system, a so called boot loader is used.  It is installed in a boot partition.  You must set the bootable flag for the partition.  Such a partition will be marked with "${BOOTABLE}" in the main partitioning menu.
tl: Upang mapaandar ang bago niyong sistema, may boot loader na ginagamit.  Ito ay nilalagay sa boot partisyon.  Kailangan niyong i-set ang bootable flag ng partisyon na iyon.  Ang partisyon na ganito ay markado na "${BOOTABLE}" sa punong menu ng pag-partisyon.
