For new users, personal Debian boxes, home systems, and other
single-user setups, a single
/ partition (plus
swap) is probably the easiest, simplest way to go. The recommended
partition type is ext4.
For multi-user systems or systems with lots of disk space, it's best
/home each on
their own partitions separate from the
You might need a separate
/usr/local partition if
you plan to install many programs that are not part of the Debian
distribution. If your machine will be a mail server, you might need
/var/mail a separate partition.
If you are setting up a server with lots
of user accounts, it's generally good to have a separate, large
/home partition. In general, the partitioning
situation varies from computer to computer depending on its uses.
For very complex systems, you should see the Multi Disk HOWTO. This contains in-depth information, mostly of interest to ISPs and people setting up servers.
With respect to the issue of swap partition size, there are many views. One rule of thumb which works well is to use as much swap as you have system memory. It also shouldn't be smaller than 512MB, in most cases. Of course, there are exceptions to these rules.
As an example, an older home machine might have 512MB of RAM and a
20GB SATA drive on
/dev/sda. There might be a
8GB partition for another operating system on
/dev/sda1, a 512MB swap partition on
/dev/sda3 and about 11.4GB on
/dev/sda2 as the Linux partition.
For an idea of the space taken by tasks you might be interested in adding after your system installation is complete, check Section D.2, “Disk Space Needed for Tasks”.